Target Outcome

Finite element mesh of a tissue of interest ready for model development:


Include(Infrastructure/AuxiliarySoftware, "Infrastructure", 2, from="= Geometry & Mesh Generation & Manipulation =", to="= Scripting & Numerical Analysis =")

Previous Protocols

For more details, see ["Specifications/GeometryGeneration"].




-- ["aerdemir"] DateTime(2013-12-30T15:14:36Z) This section may list general purpose procedures and alternatives to utilize the same input to reach the same output. Procedures optimized for specific tissues should also be provided in here.



Model components: rigid bodies, shell (i.e. bone: femur, tibia, patella)

IA-FEMesh + rounded STL:

Software: IA-FEMesh, Version 1.0

Method: Quadrilateral Surface Meshing

Input: rounded STL triangulated surface geometry (i.e. no sharp edges in STL surface geometry)

Example Files:

OpenKnee, Gen. 1 model, femoral geometry (w/o holes): attachment:femur.stl,

IA-FEMesh block: attachment:femur_IA-FEMesh_Block.vtk

NOTES: block edges should be tangential to and circumscribed about surface geometry

LIMITATION: not able to control projection of block edge elements nodes to geometric edges!

  1. Run IA-FEMesh.
  2. Load surface geometry:
    • Surface tab: select "Load" from drop-down menu (e.g. femur.stl).
  3. Change surface geometry opacity:
    • Click on name of loaded surface geometry in Object Manager.
    • e.g. set Opacity to 0.5 (out of 1.0 = opaque).
  4. Create a basic block:
    • Block(s) tab: select "Create" from drop-down menu.
    • Select "Create block from surface bounds".
    • Click "Apply".
  5. Move basic block nodes to project to desire locations on surface:
    • Block(s) tab: select "Build/Edit" from drop-down menu.
    • Click hand button.
    • Iteratively refine node positions:
      • Rotate view (left mouse button outside of block geometry).
      • Move node in planes perpendicular to view.
      • Rotate view orthogonal to first view.
      • Move node to final desired location.
      • Click "Cancel" to finish.
  6. Partition block to refine block geometry to match surface geometry:
    • Block(s) tab: select "Build/Edit" from drop-down menu.
    • Iteratively partition block and edit/move newly created nodes:
      • Click "Split" button.
      • Select an edge perpendicular to desired block partitioning dimension (turns green when selected).
      • Click "Apply".
      • Iteratively move nodes (as in prior step).
    • Click "Cancel" to finish.
  7. Save block IF desired:
    • Block(s) tab: select "Save" from drop-down menu.
    • Select desired "Building Block" in drop-down menu.
    • Click "Apply".
    • Name "File name" as desired.
    • Click "Save".
  8. Assign Mesh Seeds:
    • Mesh tab: select "Assign/Edit Mesh Seeds" from drop-down menu.
    • Select "Element Length" from drop-down menu.
    • Click "Apply".
    • Iteratively refine seed sizes:
      • Select a block edge in the 3D view to refine seeding for a particular partition of the block (vectors showing partition dimension will appear, i.e. Rx (red), Ry (green), Rz (blue)).
      • Make desired partition dimension seeding either smaller or larger to decrease or increase the seed size respectively.
      • Click "Cancel" to finish.
  9. Create mesh:
    • Mesh tab: select "Create" from drop-down menu.
    • Select "Surface Mesh", select "quad" (square).
    • Specify "Node" and "Element" Label names.
    • Click "Apply".
  10. Inspect mesh quality:
    • Quality tab: select "Evaluate/Display Mesh Quality" from drop-down menu.
    • Select Metric from drop-down menu: e.g. "Jacobian"
    • Click "Cancel" to finish.
  11. Iteratively smooth mesh IF needed:
    • Quality tab: select "Mesh Improvement" from drop-down menu.
    • Set "Smoothing Iterations": e.g. 5.
    • Click "Apply".
  12. Export mesh:
    • Mesh tab: select "Export ABAQUS File" from drop-down menu.
    • Select desired "Mesh" in drop-down menu.
    • Click "Apply".
    • Name "File name" as desired.
    • Click "Save".

Example file results:

IA-FEMesh quad surface mesh: attachment:femur_IA-FEMesh_SurfMesh.vtk





Model components: deformable bodies, volumetric (i.e. cartilage, ligaments, menisci)

IA-FEMesh + rounded STL:

Follow the corresponding procedure from the Quadrilateral Meshing section above, besides the following step:

  1. Create mesh:
    • Mesh tab: select "Create" from drop-down menu.
    • Select "Volumetric Mesh", select "hex" (cube).
    • Specify "Node" and "Element" Label names.
    • Click "Apply".

Salome Sub-Meshing + Hex-topology IGES:

Software: Salome 7.5.1

Method: Hexahedral Sub-Meshing (NOTE: tried Salome HEXABLOCK meshing, but face elements were twisted due to edge curvature)

Input: IGES parametric surface/volume geometry with hexahedral topology (i.e. 8 nodes, 12 edges, 6 faces)

Example Files:

OpenKnee, Gen. 1 model, lateral tibia cartilage geometry: attachment:lat_tibial_cartilage.igs,

Salome meshing script:

  1. Run Salome.
  2. Activate "New" Geometry Module.
  3. Load IGES file:
    • File -> Import -> IGES (e.g. lat_tibial_cartilage.igs)

    • If warned to "take units in account", select "Yes".
  4. If geometry is not visible in OCC 3D scene viewer:
    • click 'Global Panning" button in OCC viewer.
  5. If 3D view manipulation shortcut + mouse button control is not working:
    • click "Rotation" button in OCC viewer and rotate view a little, then shorcut + mouse will work.
  6. To volumetrically render the geometry, select:
    • View -> Display Mode -> Shading With Edges

  7. Check geometry information:
    • Measures -> What is

    • Need to REPAIR the geometry IF:
      1. faces are not watertight
      2. it is NOT a solid.
      3. it does NOT have: 8 vertices, 12 edges, 6 wires, 6 faces.
  8. IF geometry REPAIR is needed:
    1. IF edges of faces are not watertight, SEW the geometry:
      • Repair -> Sewing

      • Select shape: loaded geometry (e.g. lat_tibial_cartilage_1)
      • Iteratively reduce the tolerance (from 1e-7) one order of magnitude at a time until geometry is valid:
        • Check "What is" geometry until the result has: 6 wires, 6 faces, 1 shell.
        • e.g. 1e-5 works with example geometry (lat_tibial_cartilage_1)
      • OUTPUT GEOMETRY NAME: Sewing_#
    2. IF geometry is NOT SOLID:
      • New Entity -> Build -> Solid

      • Select sewing: Sewing_#
      • Check "What is" geometry: 6 wires, 6 faces, 1 shell, 1 solid.
    3. IF geometry has MORE THAN 8 vertices OR 6 edges:
      • Repair -> Remove Extra Edges

      • Select: Solid_1
      • Check "What is" geometry: 8 vertices, 12 edges, 6 wires, 6 faces, 1 shell, 1 solid.
      • OUTPUT GEOMETRY NAME: NoExtraEdges_1

  9. Explode edges from solid geometry:
    • New Entity -> Explode

    • Select Sub-shape Types: Edge
  10. Activate the Mesh module.
  11. Create a new mesh:
    • Mesh -> Create Mesh

    • Geometry: NoExtraEdges_1

    • Mesh type: Hexahedral
    • 3D tab:
      • Algorithm: Hexahedron (i,j,k)
    • 2D tab:
      • Algorithm: Quadrangle (Mapping)
      • Hypothesis:
        • Transition: Standard
  12. Create 3 sub-meshes for each set of 4 matching hex-mesh block dimension edges:
    • Mesh -> Create Sub-mesh

    • Name: SubMesh_<dim> (e.g. SubMesh_z -or- SubMesh_3)

    • Mesh: Mesh_1
    • Geometry: interactively select 4 corresponding edges in Geometry hierarchy window
      • use Shift or Ctrl to select multiple edges at once
      • e.g. for SubMesh_z, select: Edge_1, Edge_2, Edge_9, Edge_10

      • e.g. for SubMesh_x, select: Edge_3, Edge_4, Edge_11, Edge_12

      • e.g. for SubMesh_y, select: Edge_5, Edge_6, Edge_7, Edge_8

    • 1D tab:
      • Algorithm: Wire Discretisation
      • Hypothesis: Nb. Segments
        • Name: Nb. Segments_<dim> (e.g. Nb. Segments_z)

        • Number of Segments: <desired #> (e.g. z = 3, x = 50, y = 50)

        • Type of distribution: Equidistant distribution
        • NOTE: create new Hypothesis for each block dimension: x,y,z
  13. Calculate mesh:
    • Mesh -> Compute

  14. Export mesh:
    • Select mesh name in Geometry hierarchy window.
    • File -> Export -> UNV file.

    • Name "File name" as desired.
    • Click "Save".

Example file results:

Salome hex mesh: attachment:lat_tibial_cartilage_Salome_HEX.unv


Salome + STL: