Gait analysis

SCONE is a software tool for predictive simulations of biomechanical movement. It uses OpenSim for modeling and simulation, and performs optimization using various control strategies, including feed-forward control, proprioceptic feedback control, and bal
POST REPLY
User avatar
Jess White
Posts: 14
Joined: Thu May 23, 2019 12:41 am

Gait analysis

Post by Jess White » Thu Dec 02, 2021 3:08 am

Hi,

The gait analysis tab on SCONE will not superimpose my results over the template example of Bovi et al. (2011). When I run any of the tutorials it works though. But even when I just change the code for my model leaving the initial state gait and everything else the same it still won't work. Am I doing something wrong?

Thanks
Jess
Top
User avatar
Thomas Geijtenbeek
Posts: 461
Joined: Wed Mar 12, 2014 8:08 am

Re: Gait analysis

Post by Thomas Geijtenbeek » Thu Dec 02, 2021 3:13 am

Your simulation might not output all the channels required by the gait analysis template. Do you see a warning appear in the messages window after you perform the gait analysis?
Top
User avatar
Jess White
Posts: 14
Joined: Thu May 23, 2019 12:41 am

Re: Gait analysis

Post by Jess White » Thu Dec 02, 2021 4:03 am

Hi Thomas,

Oh yes, it is saying that there are not enough gait cycles. Will it work if I let it run longer?

Jess
Top
User avatar
Thomas Geijtenbeek
Posts: 461
Joined: Wed Mar 12, 2014 8:08 am

Re: Gait analysis

Post by Thomas Geijtenbeek » Thu Dec 02, 2021 6:14 am

It might, but the steps might also not be detected correctly. How long is your simulation now?
Top
User avatar
Jess White
Posts: 14
Joined: Thu May 23, 2019 12:41 am

Re: Gait analysis

Post by Jess White » Fri Dec 03, 2021 4:26 am

I ran the simulation for longer and it worked.

Thank you
Jess
Top
User avatar
Thomas Geijtenbeek
Posts: 461
Joined: Wed Mar 12, 2014 8:08 am

Re: Gait analysis

Post by Thomas Geijtenbeek » Fri Dec 03, 2021 8:17 am

That's good to hear, thanks!
Top
POST REPLY