Compute TAWSS and OSI

Provides a system for patient-specific cardiovascular modeling and simulation.
User avatar
Surabhi Rathore
Posts: 22
Joined: Tue Nov 12, 2019 11:38 pm

Re: Compute TAWSS and OSI

Post by Surabhi Rathore » Fri Feb 07, 2020 8:00 am

Hi Dave,

Thank you very much for your response.
Yes, I found the new svFSI execution file for Ubuntu 18.04. I was trying to do the simulation from the svSolver.
I have some questions:

1. How to implement the impedance boundary condition? Or for this boundary condition we need do generate from the GenBC, manually.

2. I also did not know that where to locate the 1Dsolver execution file in GUI.
Please let me know.

Thanks
Surabhi

User avatar
David Parker
Posts: 1747
Joined: Tue Aug 23, 2005 2:43 pm

Re: Compute TAWSS and OSI

Post by David Parker » Fri Feb 07, 2020 12:37 pm

Hi Surabhi,

SV supports RCR and Resistance impedance BCs. If you want something more complicated then you need to implement it using GenBC.

SV expects the 1D Solver to be installed in /usr/local/sv/oneDSolver.

Cheers,
Dave

User avatar
Surabhi Rathore
Posts: 22
Joined: Tue Nov 12, 2019 11:38 pm

Re: Compute TAWSS and OSI

Post by Surabhi Rathore » Sat Feb 08, 2020 3:17 am

Hi Dave,

Thank you very much for the reply. I think I did not write the question clearly.

I would like to know about the in SV GUI the in which option I need to set the location for the 1D solver.
Here, I am attaching the .png image please let me know that I did the setting correctly or not because I not able to run the simulation.

Have a nice weekend.
Surabhi
Attachments
Screenshot from 2020-02-05 23-36-23.png
Screenshot from 2020-02-05 23-36-23.png (205.08 KiB) Viewed 663 times

User avatar
David Parker
Posts: 1747
Joined: Tue Aug 23, 2005 2:43 pm

Re: Compute TAWSS and OSI

Post by David Parker » Mon Feb 10, 2020 5:12 pm

Hi Surabhi,

The 1D Solver preferences panel is wrong, I don't think SV even reads the values for that panel.

When you install the 1D Solver it is installed in /usr/local/sv/oneDSolver and that is where SV is looking for it. Are you trying to run the 1D Solver and SV is not finding it?

Cheers,
Dave

User avatar
Surabhi Rathore
Posts: 22
Joined: Tue Nov 12, 2019 11:38 pm

Re: Compute TAWSS and OSI

Post by Surabhi Rathore » Tue Feb 11, 2020 12:31 am

Hi Dave,

Yes. You understand my problem for 1D SVsolver.

Before, I did not set any preference for the 1D Solver in GUI.
My 1D solver location s same as you suggested in the last post /usr/local/sv/oneDSolver.

But, SV is not finding the path. I am not sure why??

Thanks,
Surabhi

POST REPLY