Hi I'm SimVascular user, and I had a Problem about Meshing
With out Boundary Layer Meshing, mesh is complete no problem. But With Boundary Layer Meshing, program give error message 'failed in generating meshing' to me. I want to include Boundary Layer Meshing. How can I do?
I did several times of remesh and smoothing sharp point of model.
Here, this is my model.
https://drive.google.com/drive/folders/ ... sp=sharing
Thank you.
Sangwon
meshing error
-
David Parker
- Posts: 1719
- Joined: Tue Aug 23, 2005 2:43 pm
Re: meshing error
Hi Sangwon,
I had a look at your model.
I think the problem with boundary layer meshing failing may be caused by the irregular surface triangles of your model shown below
The bend shown below may also be causing problems.
This is a really large model so you will need to create a less complicated model to identify what geometry is causing the problem, e.g. create a model of just the bend region and see if that can be meshed. If that is causing the problem then you can modify the geometry by perhaps straightening out the bend a bit.
Cheers,
Dave
I had a look at your model.
I think the problem with boundary layer meshing failing may be caused by the irregular surface triangles of your model shown below
- Screen Shot 2022-11-29 at 12.04.00 PM.png (129.66 KiB) Viewed 279 times
The bend shown below may also be causing problems.
- Screen Shot 2022-11-29 at 12.04.22 PM.png (34.99 KiB) Viewed 279 times
This is a really large model so you will need to create a less complicated model to identify what geometry is causing the problem, e.g. create a model of just the bend region and see if that can be meshed. If that is causing the problem then you can modify the geometry by perhaps straightening out the bend a bit.
Cheers,
Dave
-
Ryu Sangwon
- Posts: 8
- Joined: Mon May 09, 2022 1:31 am
Re: meshing error
Hi Dave
Thank you for your reply and some of advice.
and I have a question that Does this SimVascular program have a function to merge models with models?
I try it, but I can't find any way to merge another models.
thank you for reading
Sangwon
Thank you for your reply and some of advice.
and I have a question that Does this SimVascular program have a function to merge models with models?
I try it, but I can't find any way to merge another models.
thank you for reading
Sangwon
-
David Parker
- Posts: 1719
- Joined: Tue Aug 23, 2005 2:43 pm
Re: meshing error
Hi Sangwon,
The SV GUI does not have the capability to merge models. The SV Python API does have a Boolean Union operation that might be able to merge models (see https://github.com/SimVascular/SimVascu ... n-union.py) but this might not work, might be some problems unioning two models along a boundary.
It would probably be easier to use VTK in a Python script to merge the two models, can use the vtkAppendPolyData method to do that I think.
Cheers,
Dave
The SV GUI does not have the capability to merge models. The SV Python API does have a Boolean Union operation that might be able to merge models (see https://github.com/SimVascular/SimVascu ... n-union.py) but this might not work, might be some problems unioning two models along a boundary.
It would probably be easier to use VTK in a Python script to merge the two models, can use the vtkAppendPolyData method to do that I think.
Cheers,
Dave