Issue in importing *.stl in the SimVascular Models.

Provides a system for patient-specific cardiovascular modeling and simulation.
POST REPLY
User avatar
Pratik Mitra
Posts: 6
Joined: Tue Oct 03, 2023 1:07 pm

Issue in importing *.stl in the SimVascular Models.

Post by Pratik Mitra » Mon Oct 30, 2023 8:05 pm

Hi David Parker,

I hope you are doing well.
I have a issue in importing *.stl file in the SV Models. After "Import Solid Model", the model doesn't appear in SimVascular graphics interface.
My issue is almost similar to this (viewtopicPhpbb.phpf=188&t=16403&p=0&sta ... 72751c8a0f)
I did follow the above link but still same. Can you guide me regarding this issue. I am attaching my *.stl file.

Regards,
Pratik.
Attachments
test.zip
(301.95 KiB) Downloaded 3 times
Top
User avatar
David Parker
Posts: 1632
Joined: Tue Aug 23, 2005 2:43 pm

Re: Issue in importing *.stl in the SimVascular Models.

Post by David Parker » Tue Oct 31, 2023 10:19 am

Hello Pratik,

You need to select Global Reinit from the SV Data Manager.
Screen Shot 2023-10-31 at 10.18.16 AM.png
Screen Shot 2023-10-31 at 10.18.16 AM.png (128.37 KiB) Viewed 136 times
Cheers,
Dave
Top
User avatar
Pratik Mitra
Posts: 6
Joined: Tue Oct 03, 2023 1:07 pm

Re: Issue in importing *.stl in the SimVascular Models.

Post by Pratik Mitra » Tue Oct 31, 2023 1:51 pm

Dear David Parker,

Thank you for your reply and help. It resolve my issue.

Regards,
Pratik.
Top
POST REPLY