Simulated outlet pressures increase with every cardiac cycle
Posted: Tue Jan 23, 2024 2:22 pm
Hello,
I am running an svFSI simulation, with rigid wall conditions and RCR BCs, as the first step in a prestress- fluid structure interaction workflow.
I ran my simulation for 5000 time steps (5 cardiac cycles). When I plot the velocities outputted from the simulation, i get reasonable results:
However, in plotting the outlet or inlet pressures, I find that with each cycle the pressures are increasing. I'm not sure what could be causing this:
Here is a link to the model, mesh, histor.dat file, inp file, and input flow file. https://drive.google.com/drive/folders/ ... drive_link
Thanks!
Joanne
I am running an svFSI simulation, with rigid wall conditions and RCR BCs, as the first step in a prestress- fluid structure interaction workflow.
I ran my simulation for 5000 time steps (5 cardiac cycles). When I plot the velocities outputted from the simulation, i get reasonable results:
- inlet_velocities.png (49.72 KiB) Viewed 949 times
- outlet_pressures.png (45.04 KiB) Viewed 949 times
Here is a link to the model, mesh, histor.dat file, inp file, and input flow file. https://drive.google.com/drive/folders/ ... drive_link
Thanks!
Joanne