Simbody3.3.1 make test errors compiled on Scientific Linux 6
Posted: Tue Mar 25, 2014 2:11 pm
I compiled simbody without any errors on Scientific Linux 6, however, when I run make test, the following tests fail:
The following tests FAILED:
183 - TestCustomConstraints (Failed)
184 - TestCustomConstraintsStatic (Failed)
Errors while running CTest
make: *** [test] Error 8
If I just run these tests (i.e ./TestCustomConstraints in the build directory) I get the following:
./TestCustomConstraints
Starting test TestCustomConstraints ...
testCoordinateCoupler1 ... done. testCoordinateCoupler1 time: 0ms.
testCoordinateCoupler2 ... done. testCoordinateCoupler2 time: 30ms.
testCoordinateCoupler3 ... done. testCoordinateCoupler3 time: 30ms.
testSpeedCoupler1 ... done. testSpeedCoupler1 time: 0ms.
testSpeedCoupler2 ... done. testSpeedCoupler2 time: 380ms.
Test failed due to exception: SimTK Exception thrown at TestCustomConstraints.cpp:451:
Internal bug detected: Test values should have been numerically equivalent at tolerance=1e-06.
(Assertion 'SimTK::Test::numericallyEqual((0.0),(power),1,(10*integ.getConstraintToleranceInUse()))' failed).
Please file a bug report at https://simtk.org/home/simbody (Advanced tab).
Include the above information and anything else needed to reproduce the problem.
Done. TestCustomConstraints time: 440ms.
################################################################################
./TestCustomConstraintsStatic
Starting test TestCustomConstraints ...
testCoordinateCoupler1 ... done. testCoordinateCoupler1 time: 0ms.
testCoordinateCoupler2 ... done. testCoordinateCoupler2 time: 20ms.
testCoordinateCoupler3 ... done. testCoordinateCoupler3 time: 20ms.
testSpeedCoupler1 ... done. testSpeedCoupler1 time: 0ms.
testSpeedCoupler2 ... done. testSpeedCoupler2 time: 310ms.
Test failed due to exception: SimTK Exception thrown at TestCustomConstraints.cpp:451:
Internal bug detected: Test values should have been numerically equivalent at tolerance=1e-06.
(Assertion 'SimTK::Test::numericallyEqual((0.0),(power),1,(10*integ.getConstraintToleranceInUse()))' failed).
Please file a bug report at https://simtk.org/home/simbody (Advanced tab).
Include the above information and anything else needed to reproduce the problem.
Done. TestCustomConstraints time: 350ms.
Do you have any suggestions to fix this?
Thanks in advance!
Colin
The following tests FAILED:
183 - TestCustomConstraints (Failed)
184 - TestCustomConstraintsStatic (Failed)
Errors while running CTest
make: *** [test] Error 8
If I just run these tests (i.e ./TestCustomConstraints in the build directory) I get the following:
./TestCustomConstraints
Starting test TestCustomConstraints ...
testCoordinateCoupler1 ... done. testCoordinateCoupler1 time: 0ms.
testCoordinateCoupler2 ... done. testCoordinateCoupler2 time: 30ms.
testCoordinateCoupler3 ... done. testCoordinateCoupler3 time: 30ms.
testSpeedCoupler1 ... done. testSpeedCoupler1 time: 0ms.
testSpeedCoupler2 ... done. testSpeedCoupler2 time: 380ms.
Test failed due to exception: SimTK Exception thrown at TestCustomConstraints.cpp:451:
Internal bug detected: Test values should have been numerically equivalent at tolerance=1e-06.
(Assertion 'SimTK::Test::numericallyEqual((0.0),(power),1,(10*integ.getConstraintToleranceInUse()))' failed).
Please file a bug report at https://simtk.org/home/simbody (Advanced tab).
Include the above information and anything else needed to reproduce the problem.
Done. TestCustomConstraints time: 440ms.
################################################################################
./TestCustomConstraintsStatic
Starting test TestCustomConstraints ...
testCoordinateCoupler1 ... done. testCoordinateCoupler1 time: 0ms.
testCoordinateCoupler2 ... done. testCoordinateCoupler2 time: 20ms.
testCoordinateCoupler3 ... done. testCoordinateCoupler3 time: 20ms.
testSpeedCoupler1 ... done. testSpeedCoupler1 time: 0ms.
testSpeedCoupler2 ... done. testSpeedCoupler2 time: 310ms.
Test failed due to exception: SimTK Exception thrown at TestCustomConstraints.cpp:451:
Internal bug detected: Test values should have been numerically equivalent at tolerance=1e-06.
(Assertion 'SimTK::Test::numericallyEqual((0.0),(power),1,(10*integ.getConstraintToleranceInUse()))' failed).
Please file a bug report at https://simtk.org/home/simbody (Advanced tab).
Include the above information and anything else needed to reproduce the problem.
Done. TestCustomConstraints time: 350ms.
Do you have any suggestions to fix this?
Thanks in advance!
Colin