Hello,
I downloaded the installation file (CEINMS-0.10.0-Win32), and fixed the "Warning! PATH too long installer unable to modify PATH!".
Then I attempted to check The Calibration step in the cmd window. I’ve got an error, as shown in the attached screenshot of the cmd prompt.
Will this 32-bit run on my 64-bit operating system?
Any help would be greatly appreciated.
Thanks,
Aseel
CEINMScalibrate.exe-Application Error!
- Aseel Ghazwan
- Posts: 22
- Joined: Thu Sep 17, 2015 2:54 am
CEINMScalibrate.exe-Application Error!
- Attachments
-
- CEINMS.png (47.09 KiB) Viewed 1508 times
- Claudio Pizzolato
- Posts: 48
- Joined: Sat Apr 30, 2011 7:05 am
Re: CEINMScalibrate.exe-Application Error!
Hi Aseel,
The PATH too long message is a known problem, and you can find the solution here (viewtopicPhpbb.php?f=840&t=5883&p=0&start=0&view=).
Regarding the other error, I believe it is due to the version of OpenSim you have installed. CEINMS-0.10.0-Win32 works both on a 32 and 64 bit operating system, but only works with OpenSIm 3.3 at 32 bit, which you have to be installed correctly. I believe that error is due to the fact that you have OpenSim 3.3 at 64 bit installed in your system.
I will create and make available for download an installer for the 64 bit version of CEINMS, so it can be used with OpenSIm 3.3 64. It should solve the problem. In the meantime you can install OpenSim 3.3 at 32 bit.
Cheers
Claudio
The PATH too long message is a known problem, and you can find the solution here (viewtopicPhpbb.php?f=840&t=5883&p=0&start=0&view=).
Regarding the other error, I believe it is due to the version of OpenSim you have installed. CEINMS-0.10.0-Win32 works both on a 32 and 64 bit operating system, but only works with OpenSIm 3.3 at 32 bit, which you have to be installed correctly. I believe that error is due to the fact that you have OpenSim 3.3 at 64 bit installed in your system.
I will create and make available for download an installer for the 64 bit version of CEINMS, so it can be used with OpenSIm 3.3 64. It should solve the problem. In the meantime you can install OpenSim 3.3 at 32 bit.
Cheers
Claudio
- Julian Atkinson
- Posts: 52
- Joined: Thu Feb 25, 2016 12:39 am
Re: CEINMScalibrate.exe-Application Error!
Hi there Claudio
Are you aware of when the new version will be available?
Also, will there be an updated library on Github?
Kind regards,
Julian
Are you aware of when the new version will be available?
Also, will there be an updated library on Github?
Kind regards,
Julian
- Claudio Pizzolato
- Posts: 48
- Joined: Sat Apr 30, 2011 7:05 am
Re: CEINMScalibrate.exe-Application Error!
I Julian,
I have the 64 bit version of CEINMS 0.10 ready to go, I just need to test it installs and works properly on a clean computer. I'll upload it sometimes next week. Sorry for the inconvenience.
Cheers
Claudio
I have the 64 bit version of CEINMS 0.10 ready to go, I just need to test it installs and works properly on a clean computer. I'll upload it sometimes next week. Sorry for the inconvenience.
Cheers
Claudio
- Julian Atkinson
- Posts: 52
- Joined: Thu Feb 25, 2016 12:39 am
Re: CEINMScalibrate.exe-Application Error!
No problem.
Thank you very much Claudio
Thank you very much Claudio
Re: CEINMScalibrate.exe-Application Error!
Dear Dr Claudio:backdrifts wrote:I Julian,
I have the 64 bit version of CEINMS 0.10 ready to go, I just need to test it installs and works properly on a clean computer. I'll upload it sometimes next week. Sorry for the inconvenience.
Cheers
Claudio
Have the 64bit of CEINMS compatible with OpenSim 3.3 been issued ? Since I got the same error when I download it just now and use it with OpenSim 3.3 on Win64.
Thanks & Best Regards,
Jack