Preview static pose
- Robert Catena
- Posts: 8
- Joined: Tue Jun 04, 2019 3:32 pm
Preview static pose
The preview static pose option for the scale tool does not output the experimental markers (blue) in comparison to the virtual marker. All I see are the pink virtual markers. Picture attached. Any thoughts on why this may be? It happened in v4.3 and is still happening now in v4.4
- Attachments
-
- opensim.PNG (115.31 KiB) Viewed 322 times
Tags:
- Carmichael Ong
- Posts: 401
- Joined: Fri Feb 24, 2012 11:50 am
Re: Preview static pose
To show the experimental markers after you scale the model, you can go to "File -> Preview Experimental Data" and choose the corresponding .trc file for the static pose markers. If the markers and the scaled model are shifted, make sure that the "Model Offset" for the scaled model and the markers are the same. You can do this by right-clicking the model name and experimental data and checking the "Model Offset.." option and making sure all the values are the same (usually setting them all to 0 is good enough).