How To Edit File Notepad ++

Provide easy-to-use, extensible software for modeling, simulating, controlling, and analyzing the neuromusculoskeletal system.
POST REPLY
User avatar
Abdulbaset Benwali
Posts: 30
Joined: Tue Mar 29, 2022 1:04 pm

How To Edit File Notepad ++

Post by Abdulbaset Benwali » Tue Aug 08, 2023 10:51 am

Good Day
Could you please let know how to edit file Notepad ++ of CMC failed during simulation. Note that I have one segment of the lower body is locked. The message shown unable to find a feasible solution at 0.5 second and the model can not generate the force to achieve the target acceleration because of not all model DOF is actuated, the track task is locked coordinate and finally there are control constraint on reserve/residual actuators.
Any help will be appreciated.
Thank you in advance
Tags:
Windows
GUI
OpenSim 4.3
Top
User avatar
Thomas Uchida
Posts: 1793
Joined: Wed May 16, 2012 11:40 am

Re: How To Edit File Notepad ++

Post by Thomas Uchida » Wed Sep 06, 2023 2:16 pm

The "Getting Started with CMC" page in the documentation provides some tips for troubleshooting CMC simulations (see the "Best Practices and Troubleshooting Tips" section on this page: https://simtk-confluence.stanford.edu:8 ... d+with+CMC). If the message is that "not all model DOF is actuated," you may be missing reserve actuators for some degrees of freedom. If this is indeed the issue, you can add the missing actuators to the "actuators" XML file you are providing to the CMC Tool (e.g., "gait2345_CMC_Actuators.xml").
Top
POST REPLY