FAQ question: C3D Files

Provide easy-to-use, extensible software for modeling, simulating, controlling, and analyzing the neuromusculoskeletal system.
POST REPLY
User avatar
Leng-Feng Lee
Posts: 3
Joined: Tue May 11, 2010 12:30 pm

RE: FAQ question: C3D Files

Post by Leng-Feng Lee » Mon Aug 01, 2011 3:51 pm

This toolbox only runs in 32bits MATLAB?

Lee
Top
User avatar
Ayman Habib
Posts: 2248
Joined: Fri Apr 01, 2005 12:24 pm

RE: FAQ question: C3D Files

Post by Ayman Habib » Tue Aug 02, 2011 9:47 am

Hi Lee,

I'd recommend you send this email to the forum of the C3D Toolbox project as it might be better monitored by authors/users of the Toolbox.

Good luck,
-Ayman
Top
User avatar
Jong Hwa Lee
Posts: 4
Joined: Wed Feb 02, 2011 5:01 pm

RE: FAQ question: C3D Files

Post by Jong Hwa Lee » Fri Aug 05, 2011 12:36 am

Yes, it works at 32bit Matlab since the C3D server supports 32 bit OS: Windows NT, Windows 2000, Windows XP, Vista and Windows 7.

http://www.motion-labs.com/support_faq.html

For your information, I am using this toolbox in 32 bit computer with Windows 7.
Top
User avatar
Sangjun Lee
Posts: 30
Joined: Sun Apr 24, 2011 10:30 pm

Re: FAQ question: C3D Files

Post by Sangjun Lee » Tue Sep 13, 2011 9:36 pm

Hi all,

If you use VICON motion capture systems,
please try our toolbox which directly converts VICON motion capture data(*.csv) into OpenSim inputs(*.trc and *.mot).
This is much easier and faster than converting C3D files.

Please refer to our project page: https://simtk.org/home/lee-son/
The toolbox v.1.4.1 is already available, but the user manual is now in preparation.
If you have any questions in using our toolbox, please contact us.

Lee
Top
POST REPLY