Ground reaction forces

Provide easy-to-use, extensible software for modeling, simulating, controlling, and analyzing the neuromusculoskeletal system.
POST REPLY
User avatar
Samuel Dyson
Posts: 29
Joined: Mon Apr 04, 2011 7:42 pm

Ground reaction forces

Post by Samuel Dyson » Tue Jul 12, 2011 1:41 am

Hi I've been trying to create .mot files for my ground reaction forces. I've been looking at subject01_walk1.mot from the Gait2354 example. I'd just like to clarify what units the ground_force_vx etc are in and where exactly this data came from? Is the C3D file for this example available?

User avatar
Yi Wang
Posts: 83
Joined: Fri Oct 30, 2009 1:12 pm

RE: Ground reaction forces

Post by Yi Wang » Thu Jul 14, 2011 10:07 pm

Hi Samuel,

I don't know what exactly software the official team using, but currently I am using Vicon Motus to export the data into C3D file and using a Matlab Toolkit to extract data and transform them into the essential format which OpenSim needed.

You can find the the Matlab Toolkit at the following address,

https://simtk.org/home/c3dtoolbox

As for the unit, I am pretty sure for forces the unit is Newton and for COP is "meter" and for the moment is "Newton * Meter".

Correct me if I was wrong about anything.

Thanks,
Yi Wang
University of Utah

User avatar
Wenxin Niu
Posts: 2
Joined: Sun May 22, 2011 5:23 am

RE: Ground reaction forces

Post by Wenxin Niu » Fri Jul 15, 2011 4:37 am

王易是个好同志

User avatar
Sangjun Lee
Posts: 30
Joined: Sun Apr 24, 2011 10:30 pm

Re: Ground reaction forces

Post by Sangjun Lee » Tue Sep 20, 2011 10:34 pm

Hi all,

If you use VICON motion capture systems,
please try our toolbox which directly converts VICON motion capture data(*.csv) into OpenSim inputs(*.trc and *.mot).
This is much easier and faster than converting C3D files.

Please refer to our project page: https://simtk.org/home/lee-son/
The toolbox v.1.4.1 is already available, but the user manual is now in preparation.
If you have any questions in using our toolbox, please contact us.

Lee

User avatar
Lauren Ferris
Posts: 3
Joined: Wed Sep 12, 2012 2:09 pm

Re: Ground reaction forces

Post by Lauren Ferris » Thu Sep 13, 2012 12:09 pm

I am new to this opensim thing but I had a question about the units. We measured in N and mm so would I need to convert that before using the c3d converter?

POST REPLY