Page 2 of 2
RE: FAQ question: C3D Files
Posted: Mon Aug 01, 2011 3:51 pm
by lengfenglee
This toolbox only runs in 32bits MATLAB?
Lee
RE: FAQ question: C3D Files
Posted: Tue Aug 02, 2011 9:47 am
by aymanh
Hi Lee,
I'd recommend you send this email to the forum of the C3D Toolbox project as it might be better monitored by authors/users of the Toolbox.
Good luck,
-Ayman
RE: FAQ question: C3D Files
Posted: Fri Aug 05, 2011 12:36 am
by ceo012
Yes, it works at 32bit Matlab since the C3D server supports 32 bit OS: Windows NT, Windows 2000, Windows XP, Vista and Windows 7.
http://www.motion-labs.com/support_faq.html
For your information, I am using this toolbox in 32 bit computer with Windows 7.
Re: FAQ question: C3D Files
Posted: Tue Sep 13, 2011 9:36 pm
by skylsj
Hi all,
If you use VICON motion capture systems,
please try our toolbox which directly converts VICON motion capture data(*.csv) into OpenSim inputs(*.trc and *.mot).
This is much easier and faster than converting C3D files.
Please refer to our project page:
https://simtk.org/home/lee-son/
The toolbox v.1.4.1 is already available, but the user manual is now in preparation.
If you have any questions in using our toolbox, please contact us.
Lee