.STL geometry files do not display properly

Provide easy-to-use, extensible software for modeling, simulating, controlling, and analyzing the neuromusculoskeletal system.
POST REPLY
User avatar
Vaibhavsingh Varma
Posts: 2
Joined: Thu Apr 11, 2024 11:46 am

.STL geometry files do not display properly

Post by Vaibhavsingh Varma » Thu Apr 11, 2024 5:55 pm

I am using some .STL files generated from SolidWorks and adding them as <Body>. The geometry displays in the Opensim visualizer but it is not as desired. See Picture: Opensim 3.3 - displays well Opensim 4.0 and above - does not display well just shows a random mesh. I am using the exact same .STL file in both versions.
Can I please get some recommendations for getting over this issue?
Attachments
osim_edited.jpg
comparison between visualization of .stl file in Opensim 3.3 and Opensim 4.5
osim_edited.jpg (187.36 KiB) Viewed 266 times
Tags:
mesh
geometry
display
STL file
Top
User avatar
Mohammadreza Rezaie
Posts: 381
Joined: Fri Nov 24, 2017 12:48 am

Re: .STL geometry files do not display properly

Post by Mohammadreza Rezaie » Thu Apr 11, 2024 11:14 pm

Hi, in my experience, this happened when the single geometry file consisted of multiple parts. You can fix it by using Boolean union or other similar tools in your CAD software, or define a separate Mesh for each part in your OpenSim model (in the attached_geometry tag). Please see Ayman's response here: viewtopicPhpbb.php?f=91&t=11423&p=0&start=0&view=
Top
User avatar
Vaibhavsingh Varma
Posts: 2
Joined: Thu Apr 11, 2024 11:46 am

Re: .STL geometry files do not display properly

Post by Vaibhavsingh Varma » Sat Apr 13, 2024 6:31 am

Thank you so much for the help.
Top
POST REPLY