I created a coronary artery model and followed the tutorial on the website and used the same parameter. When try to create data files for simulation i have the error and do not create the file (but, geombc.dat.1, restart.0.1) any suggestion to solve this problem? already tried wit differente model and also on mac and windows the same problem.
LINE 0000: mesh_and_adjncy_vtu mesh-complete/mesh-complete.mesh.vtu
LINE 0001: set_surface_id_vtp mesh-complete/mesh-complete.exterior.vtp
LINE 0002: set_surface_id_vtp mesh-complete/mesh-surfaces/inflow.vtp 2
LINE 0003: set_surface_id_vtp mesh-complete/mesh-surfaces/out 1.vtp 3
ERROR: could not open file (mesh-complete/mesh-surfaces/out).ERROR: command could not be processed.
error in create data files for simulation
- Luca Gontier
- Posts: 13
- Joined: Thu Sep 07, 2017 2:19 am
- Nathan Wilson
- Posts: 46
- Joined: Tue Jun 20, 2006 9:19 am
Re: error in create data files for simulation
Hello Luca,
Is there a space in your outlet name ("out 1")? All the face tags must not contain spaces. I would also recommend using a working directory on Windows that does not contain spaces to avoid issues with filenames in general. Please rename the outlet, remesh, and try again.
Nathan
SimVascular Development Team
Is there a space in your outlet name ("out 1")? All the face tags must not contain spaces. I would also recommend using a working directory on Windows that does not contain spaces to avoid issues with filenames in general. Please rename the outlet, remesh, and try again.
Nathan
SimVascular Development Team
- Luca Gontier
- Posts: 13
- Joined: Thu Sep 07, 2017 2:19 am
Re: error in create data files for simulation
Thanks, I waited to try to launch a simulation and it started. I think that was the problem, i was almost crazy to find the problem.
Thanks
Thanks