Hi David Parker,
I hope you are doing well.
I have a issue in importing *.stl file in the SV Models. After "Import Solid Model", the model doesn't appear in SimVascular graphics interface.
My issue is almost similar to this (viewtopicPhpbb.phpf=188&t=16403&p=0&sta ... 72751c8a0f)
I did follow the above link but still same. Can you guide me regarding this issue. I am attaching my *.stl file.
Regards,
Pratik.
Issue in importing *.stl in the SimVascular Models.
- Pratik Mitra
- Posts: 6
- Joined: Tue Oct 03, 2023 1:07 pm
Issue in importing *.stl in the SimVascular Models.
- Attachments
-
- test.zip
- (301.95 KiB) Downloaded 10 times
- David Parker
- Posts: 1696
- Joined: Tue Aug 23, 2005 2:43 pm
Re: Issue in importing *.stl in the SimVascular Models.
Hello Pratik,
You need to select Global Reinit from the SV Data Manager.
Cheers,
Dave
You need to select Global Reinit from the SV Data Manager.
Cheers,
Dave
- Pratik Mitra
- Posts: 6
- Joined: Tue Oct 03, 2023 1:07 pm
Re: Issue in importing *.stl in the SimVascular Models.
Dear David Parker,
Thank you for your reply and help. It resolve my issue.
Regards,
Pratik.
Thank you for your reply and help. It resolve my issue.
Regards,
Pratik.