Hi team,
I am sharing my post from the general OpenSim forum here as well --> viewtopicPhpbb.php?f=91&t=17652&p=0&start=0&view=
Any idea on why the JRA tool seems inconsistent with the dog model?
Thanks !
Max
Inconsistent values for joint reaction analysis
- Maxence Lavaill
- Posts: 6
- Joined: Thu Mar 07, 2019 10:00 pm
- Heiko Stark
- Posts: 11
- Joined: Tue Jan 05, 2016 6:59 am
Re: Inconsistent values for joint reaction analysis
Dear Maxence Lavaill,
This seems to be a bug. Set the Precision for Output to 8, then normal values should be calculated.
I would also activate "Solve for equilibrium for actuaytor states".
Best regards,
Heiko
This seems to be a bug. Set the Precision for Output to 8, then normal values should be calculated.
I would also activate "Solve for equilibrium for actuaytor states".
Best regards,
Heiko
- Attachments
-
- DOG_new.zip
- fixed
- (274.87 KiB) Downloaded 40 times
- Maxence Lavaill
- Posts: 6
- Joined: Thu Mar 07, 2019 10:00 pm
Re: Inconsistent values for joint reaction analysis
Thanks Heiko, it works!
It seems that the main issue was the unticked "Solve for equilibrium for actuator states" as it now works even with a precision of 12.
I had never ticked this before thinking that I didn't need for pure inverse dynamics problem, but it seems that it is still rather important.
Again, thank you![Smile :)](./images/smilies/icon_e_smile.gif)
Max
It seems that the main issue was the unticked "Solve for equilibrium for actuator states" as it now works even with a precision of 12.
I had never ticked this before thinking that I didn't need for pure inverse dynamics problem, but it seems that it is still rather important.
Again, thank you
![Smile :)](./images/smilies/icon_e_smile.gif)
Max