can't get febio to simulate

Overall purposes of the project are:

1) To provide free access to a three-dimensional finite element representation of the knee joint

2) Open development of a knee model for collaborative testing and use
POST REPLY
User avatar
Diagarajen Carpanen
Posts: 3
Joined: Tue Jan 25, 2011 10:39 am

can't get febio to simulate

Post by Diagarajen Carpanen » Wed Jan 26, 2011 8:13 am

Hello,

I have downloaded febio 1.2 but when I type in the commad as shown in the guide the window closes (I think the program crashes). I am running it on a 64 bit windows 7 pc. What should I do please?

Thank you
Dilen

User avatar
Ahmet Erdemir
Posts: 77
Joined: Sun Sep 10, 2006 1:35 pm

RE: can't get febio to simulate

Post by Ahmet Erdemir » Wed Jan 26, 2011 8:35 am

Hi Dilen,

First, I advise you to get FEBio 1.3.0. Open Knee simulations were conducted using that version. There is no guarantee that it will solve with an older version.

About using FEBio on 64 bit Windows 7 PC, I am afraid we didn't test the Open Knee model and FEBio on that platform as we don't have access to it. Nonetheless, I suspect that if FEBio works on that platform, Open Knee should run with it, too. You may want to check FEBio forums related to Windows 7; one example is at:

http://mrlforums.sci.utah.edu/forums/sh ... .php?t=181

Hope this helps, let me know of your progress.

Cheers,

Ahmet

User avatar
Scott Sibole
Posts: 3
Joined: Mon Aug 17, 2009 7:45 am

RE: can't get febio to simulate

Post by Scott Sibole » Wed Jan 26, 2011 1:08 pm

Hi Dilen,

You should first, as Ahmet advised, download and install an FEBio version 1.3.0+. On Windows, if you're going to try to run FEBio from anywhere other than its install directory, you'll need to add it to the system path. Right-click My Computer > Properties > Advanced > Environment Variables, I believe. I suspect this is why you see the window close behavior.

Cheers,
Scott

User avatar
Diagarajen Carpanen
Posts: 3
Joined: Tue Jan 25, 2011 10:39 am

RE: can't get febio to simulate

Post by Diagarajen Carpanen » Wed Feb 02, 2011 2:25 am

Hi,
Thank you fro your replies
I did set up febio as explain on the forum. What should I type in febio when it says Enter input file: ?

Thanks
Dilen

User avatar
Ahmet Erdemir
Posts: 77
Joined: Sun Sep 10, 2006 1:35 pm

RE: can't get febio to simulate

Post by Ahmet Erdemir » Wed Feb 02, 2011 11:07 am

Hi Dilen,

You need to provide the name of the Open Knee input file in FEBio format, which should be tf_joint.feb. If this doesn't work, you may need to provide the whole path of the file.

Ahmet

User avatar
Scott Sibole
Posts: 3
Joined: Mon Aug 17, 2009 7:45 am

RE: can't get febio to simulate

Post by Scott Sibole » Thu Feb 03, 2011 7:53 am

Hi Dilen,

You should consult the FEBio User's Manual to understand how execution works. For normal mode it will be febio -i tf_joint.feb. To execute FEBio from a directory other than the install location, you'll need to add the executable location to the system path on windows.

Cheers,
Scott

User avatar
Diagarajen Carpanen
Posts: 3
Joined: Tue Jan 25, 2011 10:39 am

RE: can't get febio to simulate

Post by Diagarajen Carpanen » Tue Mar 08, 2011 12:18 pm

Hi,

Is there a way to simulate that model in Abaqus or Ansys please?

User avatar
Ahmet Erdemir
Posts: 77
Joined: Sun Sep 10, 2006 1:35 pm

RE: can't get febio to simulate

Post by Ahmet Erdemir » Tue Mar 08, 2011 1:36 pm

The mesh file is in Abaqus native format that can be imported into Abaqus CAE. However, the user needs to define all other model components (material properties, contact definitions, etc.). While we have access to Abaqus, we did not have a chance to port the model to that solver platform yet. We don't have any experience with Ansys nor access to it, therefore we did not invest into it.

I would also like to mention that the reason we choose FEBio was the possibility for everyone to access to it as it is distributed freely for academic research purposes.

POST REPLY