The latest version of scone cannot be opened

SCONE is a software tool for predictive simulations of biomechanical movement. It uses OpenSim for modeling and simulation, and performs optimization using various control strategies, including feed-forward control, proprioceptic feedback control, and bal
POST REPLY
User avatar
li xiyuan
Posts: 4
Joined: Tue Mar 15, 2022 12:30 am

The latest version of scone cannot be opened

Post by li xiyuan » Thu Mar 24, 2022 8:01 pm

When I try to open the latest version of scone, the following window always pops up and scone closes automatically.
There are no spaces and Chinese characters in the installation directory.
Attachments
k.PNG
k.PNG (5.95 KiB) Viewed 328 times

User avatar
Thomas Geijtenbeek
Posts: 463
Joined: Wed Mar 12, 2014 8:08 am

Re: The latest version of scone cannot be opened

Post by Thomas Geijtenbeek » Fri Mar 25, 2022 3:55 am

Thank you for reporting! I have not seen this before, but it seems like something goes wrong when copying the examples to the SCONE documents folder. Is this a first installation of SCONE, or did you upgrade from a previous version?

User avatar
li xiyuan
Posts: 4
Joined: Tue Mar 15, 2022 12:30 am

Re: The latest version of scone cannot be opened

Post by li xiyuan » Fri Mar 25, 2022 6:59 pm

this is the first installation of SCONE, but when I download the lower version of scone, scone can work fine.

User avatar
li xiyuan
Posts: 4
Joined: Tue Mar 15, 2022 12:30 am

Re: The latest version of scone cannot be opened

Post by li xiyuan » Fri Mar 25, 2022 7:06 pm

I think the lower version of scone can be used because the lower version does not have the scone subfolder

User avatar
Thomas Geijtenbeek
Posts: 463
Joined: Wed Mar 12, 2014 8:08 am

Re: The latest version of scone cannot be opened

Post by Thomas Geijtenbeek » Sat Mar 26, 2022 2:03 pm

Thank you for the update. Did you try installing the new version AFTER installing the previous version? That might work as well.

User avatar
Xing Liu
Posts: 4
Joined: Sun May 22, 2022 2:08 am

Re: The latest version of scone cannot be opened

Post by Xing Liu » Wed Sep 21, 2022 2:11 am

Did you solve it, when I installed SCONE2.0.6, I also had the same problem as you.
I tried to reinstall 2.0.0 and still got the same error

User avatar
Thomas Geijtenbeek
Posts: 463
Joined: Wed Mar 12, 2014 8:08 am

Re: The latest version of scone cannot be opened

Post by Thomas Geijtenbeek » Thu Sep 22, 2022 1:00 am

This issue is handled in this thread:

viewtopicPhpbb.php?f=1180&t=15058&p=0&s ... 52ccfebb92

POST REPLY