angle

Upload mocap files and get an optimally scaled OpenSim model and IK back in minutes. Share your data with the community. Browse and download biomechanics data. Hosted by Stanford University.

Available at https://addbiomechanics.org
POST REPLY
User avatar
li shuaifu
Posts: 9
Joined: Mon Jun 12, 2023 3:19 am

angle

Post by li shuaifu » Tue Apr 16, 2024 7:50 am

Hello, why did I obtain a joint angle value of 0-1 instead of a joint angle value after using this web software to complete scaling and inverse kinematics
Attachments
屏幕截图 2024-04-16 224832.png
屏幕截图 2024-04-16 224832.png (17.89 KiB) Viewed 744 times
Top
User avatar
Nicholas Bianco
Posts: 1071
Joined: Thu Oct 04, 2012 8:09 pm

Re: angle

Post by Nicholas Bianco » Tue Apr 16, 2024 11:47 am

Hi Li Shuaifu,

The inverse kinematic results are output in radians, so these values seem to be in a reasonable range to me. Try converting to degrees and see if that looks right to you.

Best,
Nick
Top
User avatar
li shuaifu
Posts: 9
Joined: Mon Jun 12, 2023 3:19 am

Re: angle

Post by li shuaifu » Tue Apr 16, 2024 6:02 pm

Thank you for your answer, I understand. I used to be accustomed to using Opensim to calculate angles for viewing
Top
POST REPLY