Ahmet Erdemir, erdemira@ccf.org, 01/18/2016

This folder contains geometry for design of fixtures to assemble ultrasound and force transducer.

9L4.stl:

 - 3D scan of ultrasound probe 9L4 collected by Benjamin Landis.
 - File acquired from cobicore.lerner.ccf.org/midas --> Operation Multis --> Private --> Sonogram Probe Scans --> 9L4.stl @ 01/18/2016

9L4_transformed.stl:

 - 3D scan of ultrasound probe 9L4, trimmed and transformed version of 9L4.stl
 - Trimmed with a plane close to cable insertion to remove uneven surfaces (FreeCAD v0.14)
   - 9L4_trimming.fcstd
   - 9L4_trimmed.stl
 - Transformed in Meshlab v1.3.2
   - Align to principal axis
   - Translate center of bbox to origin
   - 9L4_transformed.stl
    - x - along probe contact face from vertical to horizontal divots
    - y - along probe longitudinal axis
    - z - along probe transverse axis

14L5.stl:

 - 3D scan of ultrasound probe 14L5 collected by Benjamin Landis.
 - File acquired from cobicore.lerner.ccf.org/midas --> Operation Multis --> Private --> Sonogram Probe Scans --> 14L5.stl (1) @ 03/11/2016

14L5_transformed.stl:

 - 3D scan of ultrasound probe 14L5, trimmed and transformed version of 14L5.stl
 - Trimmed with a plane close to cable insertion to remove uneven surfaces (FreeCAD v0.14)
   - 14L5_trimming.fcstd
   - 14L5_trimmed.stl
 - Transformed in Meshlab v1.3.2
   - Align to principal axis
   - Translate center of bbox to origin
   - 14L5_transformed.stl
    - x - along probe contact face from vertical to horizontal divots
    - y - along probe longitudinal axis
    - z - along probe transverse axis