API  4.2 For C++ developers
OpenSim::CoordinateLimitForce Class Reference

Generate a force that acts to limit the range of motion of a coordinate. More...

Inheritance diagram for OpenSim::CoordinateLimitForce:

## OpenSim Properties, Sockets, Outputs, Inputs

Properties (single-value)
std::string coordinate
"Coordinate (name) to be limited." More...

double upper_stiffness
"Stiffness of the passive limit force when coordinate exceeds upper " "limit. Note, rotational stiffness expected in N*m/degree." More...

double upper_limit
"The upper limit of the coordinate range of motion (rotations in " "degrees)." More...

double lower_stiffness
"Stiffness of the passive limit force when coordinate exceeds lower " "limit. Note, rotational stiffness expected in N*m/degree." More...

double lower_limit
"The lower limit of the coordinate range of motion (rotations in " "degrees)." More...

double damping
"Damping factor on the coordinate's speed applied only when limit " "is exceeded. For translational has units N/(m/s) and rotational has " "Nm/(degree/s)" More...

double transition
"Transition region width in the units of the coordinate (rotations " "in degrees). Dictates the transition from zero to constant stiffness " "as coordinate exceeds its limit." More...

bool compute_dissipation_energy
"Option to compute the dissipation energy due to damping in the " "CoordinateLimitForce. If true the dissipation power is automatically " "integrated to provide energy. Default is false." More...

OpenSim Properties, Sockets, Outputs, Inputs inherited from OpenSim::Force
bool appliesForce
"Flag indicating whether the force is applied or not. If true the force" "is applied to the MultibodySystem otherwise the force is not applied." "NOTE: Prior to OpenSim 4.0, this behavior was controlled by the " "'isDisabled' property, where 'true' meant that force was not being " "applied. Thus, if 'isDisabled' is true, then 'appliesForce is false." More...

double potential_energy
Provides the value of computePotentialEnergy() and is available at stage SimTK::Stage::Velocity . More...

OpenSim Properties, Sockets, Outputs, Inputs inherited from OpenSim::Component
Component components
"List of components that this component owns and serializes." More...

## Public Member Functions

CoordinateLimitForce ()
Default constructor. More...

CoordinateLimitForce (const std::string &coordName, double q_upper, double K_upper, double q_lower, double K_lower, double damping, double dq, bool computeDissipationEnergy=false)
Convenience constructor. More...

~CoordinateLimitForce () override=default
Destructor. More...

void setUpperStiffness (double aUpperStiffness)
Stiffness of the passive limit force when coordinate exceeds upper limit. More...

double getUpperStiffness () const

void setUpperLimit (double aUpperLimit)
Upper limit of the coordinate range of motion (rotations in degrees). More...

double getUpperLimit () const

void setLowerStiffness (double aLowerStiffness)
Stiffness of the passive limit force when coordinate exceeds lower limit. More...

double getLowerStiffness () const

void setLowerLimit (double aLowerLimit)
Lower limit of the coordinate range of motion (rotations in degrees). More...

double getLowerLimit () const

Damping factor on the coordinate's speed applied only when limit is exceeded. More...

double getDamping () const

void setTransition (double aTransition)
Transition region width with lengths is m and angles in degrees). More...

double getTransition () const

void setComputeDissipationEnergy (bool flag)
Option to compute the dissipation energy due to damping in the CoordinateLimitForce. More...

bool isComputingDissipationEnergy () const

double getPowerDissipation (const SimTK::State &s) const
Obtain the rate at which energy is being dissipated by this CoordinateLimit, that is, the power being lost. More...

double getDissipatedEnergy (const SimTK::State &s) const
Obtain energy dissipated by this CoordinateLimitForce over time in units of energy in J. More...

double calcLimitForce (const SimTK::State &s) const
Force calculation operator. More...

double computePotentialEnergy (const SimTK::State &s) const override
Contribute this Force component's potential energy to the accounting of the total system energy. More...

Array< std::string > getRecordLabels () const override
Methods to query a Force for the value actually applied during simulation The names of quantities (column labels) are returned by getRecordLabels() More...

Array< double > getRecordValues (const SimTK::State &state) const override
Given SimTK::State object extract all the values necessary to report forces, application location frame, etc. More...

Property-related functions
const std::string & get_coordinate () const
Get the value of the coordinate property. More...

std::string & upd_coordinate ()
Get a writable reference to the coordinate property. More...

void set_coordinate (const std::string &value)
Set the value of the coordinate property. More...

const double & get_upper_stiffness () const
Get the value of the upper_stiffness property. More...

double & upd_upper_stiffness ()
Get a writable reference to the upper_stiffness property. More...

void set_upper_stiffness (const double &value)
Set the value of the upper_stiffness property. More...

const double & get_upper_limit () const
Get the value of the upper_limit property. More...

double & upd_upper_limit ()
Get a writable reference to the upper_limit property. More...

void set_upper_limit (const double &value)
Set the value of the upper_limit property. More...

const double & get_lower_stiffness () const
Get the value of the lower_stiffness property. More...

double & upd_lower_stiffness ()
Get a writable reference to the lower_stiffness property. More...

void set_lower_stiffness (const double &value)
Set the value of the lower_stiffness property. More...

const double & get_lower_limit () const
Get the value of the lower_limit property. More...

double & upd_lower_limit ()
Get a writable reference to the lower_limit property. More...

void set_lower_limit (const double &value)
Set the value of the lower_limit property. More...

const double & get_damping () const
Get the value of the damping property. More...

double & upd_damping ()
Get a writable reference to the damping property. More...

void set_damping (const double &value)
Set the value of the damping property. More...

const double & get_transition () const
Get the value of the transition property. More...

double & upd_transition ()
Get a writable reference to the transition property. More...

void set_transition (const double &value)
Set the value of the transition property. More...

const bool & get_compute_dissipation_energy () const
Get the value of the compute_dissipation_energy property. More...

bool & upd_compute_dissipation_energy ()
Get a writable reference to the compute_dissipation_energy property. More...

void set_compute_dissipation_energy (const bool &value)
Set the value of the compute_dissipation_energy property. More...

Public Member Functions inherited from OpenSim::Force
virtual bool shouldBeParallelized () const
Tell SimBody to parallelize this force. More...

bool appliesForce (const SimTK::State &s) const
Return if the Force is applied (or enabled) or not. More...

void setAppliesForce (SimTK::State &s, bool applyForce) const
Set whether or not the Force is applied. More...

virtual bool hasGeometryPath () const
Return a flag indicating whether the Force is applied along a Path. More...

const bool & get_appliesForce () const
Get the value of the appliesForce property. More...

bool & upd_appliesForce ()
Get a writable reference to the appliesForce property. More...

void set_appliesForce (const bool &value)
Set the value of the appliesForce property. More...

void assign (Object &aObject) override
This allows copy assignment in the Java GUI. More...

Public Member Functions inherited from OpenSim::ModelComponent
ModelComponent ()
Default constructor. More...

ModelComponent (const std::string &aFileName, bool aUpdateFromXMLNode=true)
Construct ModelComponent from an XML file. More...

ModelComponent (SimTK::Xml::Element &aNode)
Construct ModelComponent from a specific node in an XML document. More...

virtual ~ModelComponent ()
Destructor is virtual to allow concrete model component cleanup. More...

void connectToModel (Model &model)
Connect this ModelComponent to its aggregate- a Model. More...

const ModelgetModel () const
Get a const reference to the Model this component is part of. More...

ModelupdModel ()
Get a modifiable reference to the Model this component is part of. More...

bool hasModel () const
Does this ModelComponent have a Model associated with it? More...

void preScale (const SimTK::State &s, const ScaleSet &scaleSet)
Perform any computations that must occur before ModelComponent::scale() is invoked on all ModelComponents in the Model. More...

void scale (const SimTK::State &s, const ScaleSet &scaleSet)
Scale the ModelComponent. More...

void postScale (const SimTK::State &s, const ScaleSet &scaleSet)
Perform any computations that must occur after ModelComponent::scale() has been invoked on all ModelComponents in the Model. More...

void assign (Object &aObject) override
This allows copy assignment in the Java GUI. More...

Public Member Functions inherited from OpenSim::Component
Component ()
Default constructor. More...

Component (const std::string &aFileName, bool aUpdateFromXMLNode=true)
Construct Component from an XML file. More...

Component (SimTK::Xml::Element &aNode)
Construct Component from a specific node in an XML document. More...

Component (const Component &)=default
Use default copy constructor and assignment operator. More...

Componentoperator= (const Component &)=default

virtual ~Component ()=default
Destructor is virtual to allow concrete Component to cleanup. More...

virtual void generateDecorations (bool fixed, const ModelDisplayHints &hints, const SimTK::State &state, SimTK::Array_< SimTK::DecorativeGeometry > &appendToThis) const
Optional method for generating arbitrary display geometry that reflects this Component at the specified state. More...

const SimTK::MultibodySystem & getSystem () const
Get the underlying MultibodySystem that this component is connected to. More...

bool hasSystem () const
Check if this component has an underlying MultibodySystem. More...

bool isComponentInOwnershipTree (const Component *component) const
Does the provided component already exist anywhere in the ownership tree (not just subcomponents of this component)? More...

Add a Component (as a subcomponent) of this component. More...

template<typename T = Component>
ComponentList< const T > getComponentList () const
Get an iterator through the underlying subcomponents that this component is composed of. More...

template<typename T = Component>
ComponentList< T > updComponentList ()
Similar to getComponentList(), except the resulting list allows one to modify the components. More...

template<typename T = Component>
unsigned countNumComponents () const
Uses getComponentList<T>() to count the number of underlying subcomponents of the specified type. More...

std::string getAbsolutePathString () const
Get the complete (absolute) pathname for this Component to its ancestral Component, which is the root of the tree to which this Component belongs. More...

ComponentPath getAbsolutePath () const
Return a ComponentPath of the absolute path of this Component. More...

std::string getRelativePathString (const Component &wrt) const
Get the relative path of this Component with respect to another Component, as a string. More...

ComponentPath getRelativePath (const Component &wrt) const
Get the relative path of this Component with respect to another Component. More...

bool hasComponent (const std::string &pathname) const
Query if there is a component (of any type) at the specified path name. More...

template<class C = Component>
bool hasComponent (const std::string &pathname) const
Query if there is a component of a given type at the specified path name. More...

template<class C = Component>
const C & getComponent (const std::string &pathname) const
Get a unique subcomponent of this Component by its path name and type 'C'. More...

template<class C = Component>
const C & getComponent (const ComponentPath &pathname) const

const ComponentgetComponent (const std::string &pathname) const
Similar to the templatized getComponent(), except this returns the component as the generic Component type. More...

template<class C = Component>
C & updComponent (const std::string &name)
Get a writable reference to a subcomponent. More...

template<class C = Component>
C & updComponent (const ComponentPath &name)

ComponentupdComponent (const std::string &pathname)
Similar to the templatized updComponent(), except this returns the component as the generic Component type. More...

unsigned printComponentsMatching (const std::string &substring) const
Print a list to the console of all components whose absolute path name contains the given string. More...

int getNumStateVariables () const
Get the number of "continuous" state variables maintained by the Component and its subcomponents. More...

Array< std::string > getStateVariableNames () const
Get the names of "continuous" state variables maintained by the Component and its subcomponents. More...

template<class C = Component>
const C * findComponent (const ComponentPath &pathToFind) const
Find a Component to which this Component is an ancestor—in other words, a Component that is directly owned by this Component or is owned by one of its sub-components, sub-sub-components, etc. More...

template<class C = Component>
const C * findComponent (const std::string &pathToFind) const
Same as findComponent(const ComponentPath&), but accepting a string (a path or just a name) as input. More...

const StateVariabletraverseToStateVariable (const std::string &pathName) const
Get a StateVariable anywhere in the Component tree, given a StateVariable path. More...

void finalizeFromProperties ()
Define a Component's internal data members and structure according to its properties. More...

void finalizeConnections (Component &root)
Satisfy the Component's connections specified by its Sockets and Inputs. More...

void clearConnections ()
Disconnect/clear this Component from its aggregate component. More...

Have the Component add itself to the underlying computational System. More...

void initStateFromProperties (SimTK::State &state) const
Initialize Component's state variable values from its properties. More...

void setPropertiesFromState (const SimTK::State &state)
Set Component's properties given a state. More...

int getNumSockets () const
Get the number of Sockets in this Component. More...

std::vector< std::string > getSocketNames ()
Collect and return the names of the sockets in this component. More...

template<typename T >
const T & getConnectee (const std::string &name) const
Get the "connectee" object that the Component's Socket is bound to. More...

const ObjectgetConnectee (const std::string &name) const
Get the connectee as an Object. More...

const AbstractSocketgetSocket (const std::string &name) const
Get an AbstractSocket for the given socket name. More...

AbstractSocketupdSocket (const std::string &name)
Get a writable reference to the AbstractSocket for the given socket name. More...

template<typename T >
const Socket< T > & getSocket (const std::string &name) const
Get a const reference to the concrete Socket provided by this Component by name. More...

template<typename T >
Socket< T > & updSocket (const std::string &name)
Get a writable reference to the concrete Socket provided by this Component by name. More...

void printSubcomponentInfo () const
List all subcomponents by name and recurse into these components to list their subcomponents, and so on. More...

void printSocketInfo () const
List all the Sockets of this component and whether or not they are connected. More...

void printInputInfo () const
List all the inputs of this component and whether or not they are connected. More...

template<typename C >
void printSubcomponentInfo () const

void printOutputInfo (const bool includeDescendants=true) const
Print outputs of this component and optionally, those of all subcomponents. More...

void assign (Object &aObject) override
This allows copy assignment in the Java GUI. More...

int getNumInputs () const
Access the number of Inputs that this component has. More...

int getNumOutputs () const
Access the number of Outputs that this component has. More...

std::vector< std::string > getInputNames () const
Collect and return the names of Inputs in this component as an std::vector. More...

std::vector< std::string > getOutputNames () const
Collect and return the names of Outputs in this component as an std::vector. More...

const AbstractInputgetInput (const std::string &name) const
Get an Input provided by this Component by name. More...

AbstractInputupdInput (const std::string &name)
Get a writable reference to an Input provided by this Component by name. More...

template<typename T >
const Input< T > & getInput (const std::string &name) const
Get a concrete Input that you can directly ask for its values. More...

const AbstractOutputgetOutput (const std::string &name) const
Get the Output provided by this Component by name. More...

AbstractOutputupdOutput (const std::string &name)
Get a writable reference to an Output provided by this Component by name. More...

SimTK::IteratorRange< OutputConstIteratorgetOutputs () const
Iterate through all Outputs of this component. More...

int getModelingOption (const SimTK::State &state, const std::string &name) const
Get a ModelingOption flag for this Component by name. More...

void setModelingOption (SimTK::State &state, const std::string &name, int flag) const
Set the value of a ModelingOption flag for this Component. More...

template<typename T >
const T & getInputValue (const SimTK::State &state, const std::string &name) const
Get the Input value that this component is dependent on. More...

template<typename T >
const T & getOutputValue (const SimTK::State &state, const std::string &name) const
Get the Output value provided by this Component by name. More...

double getStateVariableValue (const SimTK::State &state, const std::string &name) const
Get the value of a state variable allocated by this Component. More...

void setStateVariableValue (SimTK::State &state, const std::string &name, double value) const
Set the value of a state variable allocated by this Component by name. More...

SimTK::Vector getStateVariableValues (const SimTK::State &state) const
Get all values of the state variables allocated by this Component. More...

void setStateVariableValues (SimTK::State &state, const SimTK::Vector &values) const
Set all values of the state variables allocated by this Component. More...

double getStateVariableDerivativeValue (const SimTK::State &state, const std::string &name) const
Get the value of a state variable derivative computed by this Component. More...

double getDiscreteVariableValue (const SimTK::State &state, const std::string &name) const
Get the value of a discrete variable allocated by this Component by name. More...

void setDiscreteVariableValue (SimTK::State &state, const std::string &name, double value) const
Set the value of a discrete variable allocated by this Component by name. More...

template<class T >
SimTK::CacheEntryIndex getCacheVariableIndex (const CacheVariable< T > &cv) const
Get the index of a Component's cache variable in the Subsystem for allocations. More...

SimTK::CacheEntryIndex getCacheVariableIndex (const std::string &name) const
Get the index of a Component's cache variable in the Subsystem for allocations. More...

template<class T >
const T & getCacheVariableValue (const SimTK::State &state, const std::string &name) const
Get the value of a cache variable allocated by this Component by name. More...

template<class T >
const T & getCacheVariableValue (const SimTK::State &state, const CacheVariable< T > &cv) const
Get the value of a cache variable allocated by this Component. More...

template<typename T >
void setCacheVariableValue (const SimTK::State &state, const std::string &k, T value) const
Set the value of a cache variable, identified by name, to a new value and mark the cache variable as valid. More...

template<typename T >
void setCacheVariableValue (const SimTK::State &state, const CacheVariable< T > &cv, T value) const
Set the value of a cache variable to a new value and mark the cache variable as valid. More...

template<typename T >
T & updCacheVariableValue (const SimTK::State &state, const std::string &name) const
Returns a mutable reference to the value of a cache variable identified by name. More...

template<typename T >
T & updCacheVariableValue (const SimTK::State &state, const CacheVariable< T > &cv) const
Returns a mutable reference to the value of a cache variable. More...

bool isCacheVariableValid (const SimTK::State &state, const std::string &name) const
Returns true if the cache variable, identified by name, is valid. More...

template<class T >
bool isCacheVariableValid (const SimTK::State &state, const CacheVariable< T > &cv) const
Returns true if the cache variable is valid. More...

void markCacheVariableValid (const SimTK::State &state, const std::string &name) const
Marks the value of a cache variable, identified by name, as valid. More...

template<typename T >
void markCacheVariableValid (const SimTK::State &state, const CacheVariable< T > &cv) const
Marks the value of a cache variable as valid. More...

void markCacheVariableInvalid (const SimTK::State &state, const std::string &name) const
Marks the value of a cache variable, identified by name, as invalid. More...

template<class T >
void markCacheVariableInvalid (const SimTK::State &state, const CacheVariable< T > &cv) const
Marks the value of a cache variable as invalid. More...

const ComponentgetOwner () const
Access the owner of this Component. More...

bool hasOwner () const
(For advanced users) Check if this Component has an owner. More...

const ComponentgetRoot () const
Obtain the root Component, which is this component if it is orphaned. More...

Public Member Functions inherited from OpenSim::Object
virtual ~Object ()
Virtual destructor for cleanup. More...

bool isEqualTo (const Object &aObject) const
Equality operator wrapper for use from languages not supporting operator overloading. More...

Objectoperator= (const Object &aObject)
Copy assignment copies he base class fields, including the properties. More...

virtual bool operator== (const Object &aObject) const
Determine if two objects are equal. More...

virtual bool operator< (const Object &aObject) const
Provide an ordering for objects so they can be put in sorted containers. More...

void setName (const std::string &name)
Set the name of the Object. More...

const std::string & getName () const
Get the name of this Object. More...

void setDescription (const std::string &description)
Set description, a one-liner summary. More...

const std::string & getDescription () const
Get description, a one-liner summary. More...

const std::string & getAuthors () const
Get Authors of this Object. More...

void setAuthors (const std::string &authors)
Set Authors of this object. More...

const std::string & getReferences () const
Get references or publications to cite if using this object. More...

void setReferences (const std::string &references)
Set references or publications to cite if using this object. More...

int getNumProperties () const
Determine how many properties are stored with this Object. More...

const AbstractPropertygetPropertyByIndex (int propertyIndex) const
Get a const reference to a property by its index number, returned as an AbstractProperty. More...

AbstractPropertyupdPropertyByIndex (int propertyIndex)
Get a writable reference to a property by its index number, returned as an AbstractProperty. More...

bool hasProperty (const std::string &name) const
Return true if this Object has a property of any type with the given name, which must not be empty. More...

const AbstractPropertygetPropertyByName (const std::string &name) const
Get a const reference to a property by its name, returned as an AbstractProperty. More...

AbstractPropertyupdPropertyByName (const std::string &name)
Get a writable reference to a property by its name, returned as an AbstractProperty. More...

template<class T >
bool hasProperty () const
Return true if this Object contains an unnamed, one-object property that contains objects of the given template type T. More...

template<class T >
const Property< T > & getProperty (const PropertyIndex &index) const
Get property of known type Property<T> as a const reference; the property must be present and have the right type. More...

template<class T >
Property< T > & updProperty (const PropertyIndex &index)
Get property of known type Property<T> as a writable reference; the property must be present and have the right type. More...

bool isObjectUpToDateWithProperties () const
Returns true if no property's value has changed since the last time setObjectIsUpToDateWithProperties() was called. More...

void readObjectFromXMLNodeOrFile (SimTK::Xml::Element &objectElement, int versionNumber)
We're given an XML element from which we are to populate this Object. More...

void updateXMLNode (SimTK::Xml::Element &parent, const AbstractProperty *prop=nullptr) const
Serialize this object into the XML node that represents it. More...

bool getInlined () const
Inlined means an in-memory Object that is not associated with an XMLDocument. More...

void setInlined (bool aInlined, const std::string &aFileName="")
Mark this as inlined or not and optionally provide a file name to associate with the new XMLDocument for the non-inline case. More...

std::string getDocumentFileName () const
If there is a document associated with this object then return the file name maintained by the document. More...

int getDocumentFileVersion () const
If there is a document associated with this object then return its version number. More...

void setAllPropertiesUseDefault (bool aUseDefault)

bool print (const std::string &fileName) const
Write this Object into an XML file of the given name; conventionally the suffix to use is ".osim". More...

std::string dump () const
dump the XML representation of this Object into an std::string and return it. More...

virtual bool isA (const char *type) const
The default implementation returns true only if the supplied string is "Object"; each Object-derived class overrides this to match its own class name. More...

const std::string & toString () const
Wrapper to be used on Java side to display objects in tree; this returns just the object's name. More...

PropertySetgetPropertySet ()
OBSOLETE: Get a reference to the PropertySet maintained by the Object. More...

const PropertySetgetPropertySet () const

## Public Types

typedef CoordinateLimitForce Self
This typedef might be useful within the member functions of this class. More...

typedef Force Super
Use this typedef to refer to the superclass of this class. More...

Public Types inherited from OpenSim::Force
typedef Force Self
This typedef might be useful within the member functions of this class. More...

typedef ModelComponent Super
Use this typedef to refer to the superclass of this class. More...

Public Types inherited from OpenSim::ModelComponent
typedef ModelComponent Self
This typedef might be useful within the member functions of this class. More...

typedef Component Super
Use this typedef to refer to the superclass of this class. More...

Public Types inherited from OpenSim::Component
typedef Component Self
This typedef might be useful within the member functions of this class. More...

typedef Object Super
Use this typedef to refer to the superclass of this class. More...

typedef std::map< std::string, SimTK::ClonePtr< AbstractOutput > >::const_iterator OutputConstIterator
Define OutputConstIterator for convenience. More...

## Protected Member Functions

void extendConnectToModel (Model &aModel) override
Setup this CoordinateLimitForce as part of the model. More...

void extendAddToSystem (SimTK::MultibodySystem &system) const override
Create the underlying Force that is part of the multibody system. More...

void computeForce (const SimTK::State &s, SimTK::Vector_< SimTK::SpatialVec > &bodyForces, SimTK::Vector &mobilityForces) const override
Subclasses must implement this method to compute the forces that should be applied to bodies and generalized speeds. More...

Protected Member Functions inherited from OpenSim::Force
Force ()
Default constructor sets up Force-level properties; can only be called from a derived class constructor. More...

Force (SimTK::Xml::Element &node)
Deserialization from XML, necessary so that derived classes can (de)serialize. More...

void extendInitStateFromProperties (SimTK::State &state) const override
Subclass should override; be sure to invoke Super::extendInitStateFromProperties() at the beginning of the overriding method. More...

void extendAddToSystem (SimTK::MultibodySystem &system) const override
Default is to create a ForceAdapter which is a SimTK::Force::Custom as the underlying computational component. More...

void extendSetPropertiesFromState (const SimTK::State &state) override
Subclass should override; be sure to invoke Force::extendSetPropertiesFromState() at the beginning of the overriding method. More...

void applyForceToPoint (const SimTK::State &state, const PhysicalFrame &body, const SimTK::Vec3 &point, const SimTK::Vec3 &force, SimTK::Vector_< SimTK::SpatialVec > &bodyForces) const
Apply a force at a particular point (a "station") on a given body. More...

void applyTorque (const SimTK::State &state, const PhysicalFrame &body, const SimTK::Vec3 &torque, SimTK::Vector_< SimTK::SpatialVec > &bodyForces) const
Apply a torque to a particular body. More...

void applyGeneralizedForce (const SimTK::State &state, const Coordinate &coord, double force, SimTK::Vector &generalizedForces) const
Apply a generalized force. More...

void updateFromXMLNode (SimTK::Xml::Element &node, int versionNumber) override
Handle a change in XML syntax for Sockets. More...

Protected Member Functions inherited from OpenSim::ModelComponent
const SimTK::Vec3 & getScaleFactors (const ScaleSet &scaleSet, const Frame &frame) const
Get the scale factors corresponding to the base OpenSim::Body of the specified Frame. More...

virtual void extendPreScale (const SimTK::State &s, const ScaleSet &scaleSet)
Perform any computations that must occur before ModelComponent::scale() is invoked on all ModelComponents in the Model. More...

virtual void extendScale (const SimTK::State &s, const ScaleSet &scaleSet)
Scale the ModelComponent. More...

virtual void extendPostScale (const SimTK::State &s, const ScaleSet &scaleSet)
Perform any computations that must occur after ModelComponent::scale() has been invoked on all ModelComponents in the Model. More...

void updateFromXMLNode (SimTK::Xml::Element &aNode, int versionNumber) override
Handle a change in XML syntax for Sockets. More...

void extendFinalizeFromProperties () override
Perform any time-invariant calculations, data structure initializations, or other configuration based on the component's properties to form a functioning (but not yet connected) component. More...

Protected Member Functions inherited from OpenSim::Component
SimTK_DEFINE_UNIQUE_INDEX_TYPE (MemberSubcomponentIndex)

template<class C = Component>
MemberSubcomponentIndex constructSubcomponent (const std::string &name)
Construct a subcomponent as a data member of this Component. More...

template<class C = Component>
const C & getMemberSubcomponent (MemberSubcomponentIndex ix) const

template<class C = Component>
C & updMemberSubcomponent (MemberSubcomponentIndex ix)

Adopt a component as a subcomponent of this Component. More...

size_t getNumImmediateSubcomponents () const
Get the number of Subcomponents immediately owned by this Component. More...

size_t getNumMemberSubcomponents () const
Get the number of Subcomponents that are data members of this Component. More...

size_t getNumPropertySubcomponents () const
Get the number of Subcomponents that are properties of this Component. More...

Get the number of Subcomponents adopted by this Component. More...

std::vector< SimTK::ReferencePtr< const Component > > getImmediateSubcomponents () const
Access this Component's immediate subcomponents (not those owned by subcomponents) More...

template<class C >
const C * traversePathToComponent (ComponentPath path) const

void setNextSubcomponentInSystem (const Component &sub) const
Helper method to enable Component makers to specify the order of their subcomponents to be added to the System during addToSystem(). More...

void resetSubcomponentOrder ()
resetSubcomponentOrder clears this Component's list of ordered subcomponents (but otherwise leaves subcomponents untouched). More...

const Componentget_components (int i) const
Get the value of the i-th element of the components property. More...

Componentupd_components (int i)
Get a writable reference to the i-th element of the components property. More...

void set_components (int i, const Component &value)
Set the value of the i-th element of components property. More...

int append_components (const Component &value)
Append an element to the components property. More...

Perform any secondary operations, e.g. More...

void initComponentTreeTraversal (const Component &root) const
Build the tree of Components from this component through its descendants. More...

virtual void extendAddToSystemAfterSubcomponents (SimTK::MultibodySystem &system) const
Add appropriate Simbody elements (if needed) to the System after your component's subcomponents have had a chance to add themselves to the system. More...

void setStateVariableDerivativeValue (const SimTK::State &state, const std::string &name, double deriv) const
Set the derivative of a state variable by name when computed inside of this Component's computeStateVariableDerivatives() method. More...

virtual void extendRealizeTopology (SimTK::State &state) const
Obtain state resources that are needed unconditionally, and perform computations that depend only on the system topology. More...

virtual void extendRealizeModel (SimTK::State &state) const
Obtain and name state resources (like state variables allocated by an underlying Simbody component) that may be needed, depending on modeling options. More...

virtual void extendRealizeInstance (const SimTK::State &state) const
Perform computations that depend only on instance variables, like lengths and masses. More...

virtual void extendRealizeTime (const SimTK::State &state) const
Perform computations that depend only on time and earlier stages. More...

virtual void extendRealizePosition (const SimTK::State &state) const
Perform computations that depend only on position-level state variables and computations performed in earlier stages (including time). More...

virtual void extendRealizeVelocity (const SimTK::State &state) const
Perform computations that depend only on velocity-level state variables and computations performed in earlier stages (including position, and time). More...

virtual void extendRealizeDynamics (const SimTK::State &state) const
Perform computations (typically forces) that may depend on dynamics-stage state variables, and on computations performed in earlier stages (including velocity, position, and time), but not on other forces, accelerations, constraint multipliers, or reaction forces. More...

virtual void extendRealizeAcceleration (const SimTK::State &state) const
Perform computations that may depend on applied forces. More...

virtual void extendRealizeReport (const SimTK::State &state) const
Perform computations that may depend on anything but are only used for reporting and cannot affect subsequent simulation behavior. More...

void addModelingOption (const std::string &optionName, int maxFlagValue) const
Add a modeling option (integer flag stored in the State) for use by this Component. More...

void addStateVariable (const std::string &stateVariableName, const SimTK::Stage &invalidatesStage=SimTK::Stage::Dynamics, bool isHidden=false) const
Add a continuous system state variable belonging to this Component, and assign a name by which to refer to it. More...

The above method provides a convenient interface to this method, which automatically creates an 'AddedStateVariable' and allocates resources in the SimTK::State for this variable. More...

void addDiscreteVariable (const std::string &discreteVariableName, SimTK::Stage invalidatesStage) const
Add a system discrete variable belonging to this Component, give it a name by which it can be referenced, and declare the lowest Stage that should be invalidated if this variable's value is changed. More...

SimTK::MultibodySystem & updSystem () const
Get writable reference to the MultibodySystem that this component is connected to. More...

int getStateIndex (const std::string &name) const
Get the index of a Component's continuous state variable in the Subsystem for allocations. More...

SimTK::SystemYIndex getStateVariableSystemIndex (const std::string &stateVariableName) const
Get the System Index of a state variable allocated by this Component. More...

const SimTK::DiscreteVariableIndex getDiscreteVariableIndex (const std::string &name) const
Get the index of a Component's discrete variable in the Subsystem for allocations. More...

template<typename T >
PropertyIndex constructSocket (const std::string &name, const std::string &propertyComment)
Construct a specialized Socket for this Component's dependence on another Component. More...

template<typename T , typename CompType = Component>
bool constructOutput (const std::string &name, T(CompType::*const memFunc)(const SimTK::State &) const, const SimTK::Stage &dependsOn=SimTK::Stage::Acceleration)
Construct an output for a member function of the same component. More...

template<typename T , typename CompType = Component>
bool constructOutput (const std::string &name, const T &(CompType::*const memFunc)(const SimTK::State &) const, const SimTK::Stage &dependsOn=SimTK::Stage::Acceleration)
This variant handles component member functions that return the output value by const reference (const T&). More...

template<typename T , typename CompType >
bool constructListOutput (const std::string &name, T(CompType::*const memFunc)(const SimTK::State &, const std::string &channel) const, const SimTK::Stage &dependsOn=SimTK::Stage::Acceleration)
Construct an output that can have multiple channels. More...

bool constructOutputForStateVariable (const std::string &name)
Construct an Output for a StateVariable. More...

template<typename T >
PropertyIndex constructInput (const std::string &name, bool isList, const std::string &propertyComment, const SimTK::Stage &requiredAtStage=SimTK::Stage::Instance)
Construct an Input (socket) for this Component's dependence on an Output signal. More...

template<class T >
CacheVariable< T > addCacheVariable (std::string name, T variablePrototype, SimTK::Stage dependsOnStage) const
Add a state cache entry belonging to this Component to hold calculated values that must be automatically invalidated when certain state values change. More...

void setOwner (const Component &owner)
Set this Component's reference to its owning Component More...

Protected Member Functions inherited from OpenSim::Object
Object ()
The default constructor is only for use by constructors of derived types. More...

Object (const std::string &fileName, bool aUpdateFromXMLNode=true)
Constructor from a file, to be called from other constructors that take a file as input. More...

Object (const Object &source)
Copy constructor is invoked automatically by derived classes with default copy constructors; otherwise it must be invoked explicitly. More...

Object (SimTK::Xml::Element &aElement)
Construct the base class portion of an Object from a given Xml element that describes this Object. More...

template<class T >
PropertyIndex addProperty (const std::string &name, const std::string &comment, const T &value)
Define a new single-value property of known type T, with the given name, associated comment, and initial value. More...

template<class T >
PropertyIndex addOptionalProperty (const std::string &name, const std::string &comment)
Add an optional property, meaning it can contain either no value or a single value. More...

template<class T >
PropertyIndex addOptionalProperty (const std::string &name, const std::string &comment, const T &value)
Add an optional property, meaning it can contain either no value or a single value. More...

template<class T >
PropertyIndex addListProperty (const std::string &name, const std::string &comment, int minSize, int maxSize)
Define a new list-valued property of known type T, with the given name, associated comment, minimum (==0) and maximum (>0) allowable list lengths, and a zero-length initial value. More...

template<class T , template< class > class Container>
PropertyIndex addListProperty (const std::string &name, const std::string &comment, int minSize, int maxSize, const Container< T > &valueList)
Define a new list-valued property as above, but assigning an initial value via some templatized container class that supports size() and indexing. More...

PropertyIndex getPropertyIndex (const std::string &name) const
Look up a property by name and return its PropertyIndex if it is found. More...

template<class T >
PropertyIndex getPropertyIndex () const
Look up an unnamed property by the type of object it contains, and return its PropertyIndex if it is found. More...

template<class T >
void checkPropertyValueIsPositive (const Property< T > &p) const
Throw an exception if any of the property's values are not positive. More...

template<class T >
void checkPropertyValueIsInSet (const Property< T > &p, const std::set< T > &set) const
Throw an exception if any of the property's values are not in the provided set. More...

template<class T >
void checkPropertyValueIsInRangeOrSet (const Property< T > &p, const T &lower, const T &upper, const std::set< T > &set) const
Throw an exception if any of the property's values are neither in the provided range nor in the provided set. More...

void setObjectIsUpToDateWithProperties ()
When an object is initialized using the current values of its properties, it can set a flag indicating that it is up to date. More...

void clearObjectIsUpToDateWithProperties ()
For testing or debugging purposes, manually clear the "object is up to date with respect to properties" flag. More...

void makeObjectNamesConsistentWithProperties ()
Make sure the name of an object is consistent with its property type. More...

void updateFromXMLDocument ()
Use this method only if you're deserializing from a file and the object is at the top level; that is, primarily in constructors that take a file name as input. More...

void setDocument (XMLDocument *doc)
Unconditionally set the XMLDocument associated with this object. More...

const XMLDocumentgetDocument () const
Get a const pointer to the document (if any) associated with this object. More...

XMLDocumentupdDocument ()
Get a writable pointer to the document (if any) associated with this object. More...

## Auto-generated functions

static CoordinateLimitForcesafeDownCast (OpenSim::Object *obj)
For use in MATLAB and Python to access the concrete class. More...

static const std::string & getClassName ()
This returns "CoordinateLimitForce". More...

void assign (Object &aObject) override
This allows copy assignment in the Java GUI. More...

CoordinateLimitForceclone () const override
Create a new heap-allocated copy of the concrete object to which this Object refers. More...

const std::string & getConcreteClassName () const override
Returns the class name of the concrete Object-derived class of the actual object referenced by this Object, as a string. More...

Static Public Member Functions inherited from OpenSim::Force
static ForcesafeDownCast (OpenSim::Object *obj)
For use in MATLAB and Python to access the concrete class. More...

static const std::string & getClassName ()
This returns "Force". More...

Static Public Member Functions inherited from OpenSim::ModelComponent
static ModelComponentsafeDownCast (OpenSim::Object *obj)
For use in MATLAB and Python to access the concrete class. More...

static const std::string & getClassName ()
This returns "ModelComponent". More...

Static Public Member Functions inherited from OpenSim::Component
static ComponentsafeDownCast (OpenSim::Object *obj)
For use in MATLAB and Python to access the concrete class. More...

static const std::string & getClassName ()
This returns "Component". More...

Static Public Member Functions inherited from OpenSim::Object
static void registerType (const Object &defaultObject)
Register an instance of a class; if the class is already registered it will be replaced. More...

static void renameType (const std::string &oldTypeName, const std::string &newTypeName)
Support versioning by associating the current Object type with an old name. More...

static const ObjectgetDefaultInstanceOfType (const std::string &concreteClassName)
Return a pointer to the default instance of the registered (concrete) Object whose class name is given, or NULL if the type is not registered. More...

template<class T >
static bool isObjectTypeDerivedFrom (const std::string &concreteClassName)
Return true if the given concrete object type represents a subclass of the template object type T, and thus could be referenced with a T*. More...

static ObjectnewInstanceOfType (const std::string &concreteClassName)
Create a new instance of the concrete Object type whose class name is given as concreteClassName. More...

static void getRegisteredTypenames (Array< std::string > &typeNames)
Retrieve all the typenames registered so far. More...

template<class T >
static void getRegisteredObjectsOfGivenType (ArrayPtrs< T > &rArray)
Return an array of pointers to the default instances of all registered (concrete) Object types that derive from a given Object-derived type that does not have to be concrete. More...

static bool PrintPropertyInfo (std::ostream &os, const std::string &classNameDotPropertyName, bool printFlagInfo=true)
Dump formatted property information to a given output stream, useful for creating a "help" facility for registered objects. More...

static bool PrintPropertyInfo (std::ostream &os, const std::string &className, const std::string &propertyName, bool printFlagInfo=true)
Same as the other signature but the class name and property name are provided as two separate strings. More...

static ObjectmakeObjectFromFile (const std::string &fileName)
Create an OpenSim object whose type is based on the tag at the root node of the XML file passed in. More...

static const std::string & getClassName ()
Return the name of this class as a string; i.e., "Object". More...

static void setSerializeAllDefaults (bool shouldSerializeDefaults)
Static function to control whether all registered objects and their properties are written to the defaults section of output files rather than only those values for which the default was explicitly overwritten when read in from an input file or set programmatically. More...

static bool getSerializeAllDefaults ()
Report the value of the "serialize all defaults" flag. More...

static bool isKindOf (const char *type)
Returns true if the passed-in string is "Object"; each Object-derived class defines a method of this name for its own class name. More...

static void setDebugLevel (int newLevel)
Set the amount of logging output. More...

static int getDebugLevel ()
Get the current setting of debug level. More...

static ObjectSafeCopy (const Object *aObject)
Use the clone() method to duplicate the given object unless the pointer is null in which case null is returned. More...

static void RegisterType (const Object &defaultObject)
OBSOLETE alternate name for registerType(). More...

static void RenameType (const std::string &oldName, const std::string &newName)
OBSOLETE alternate name for renameType(). More...

Static Public Attributes inherited from OpenSim::Object
static const std::string DEFAULT_NAME
Name used for default objects when they are serialized. More...

Static Protected Member Functions inherited from OpenSim::Component
static void prependComponentPathToConnecteePath (Component &subcomponent)
For internal use. More...

Protected Attributes inherited from OpenSim::Force
SimTK::ResetOnCopy< SimTK::ForceIndex > _index
ID for the force in Simbody. More...

Protected Attributes inherited from OpenSim::ModelComponent
SimTK::ReferencePtr< Model_model
The model this component belongs to. More...

Protected Attributes inherited from OpenSim::Object
PropertySet _propertySet
OBSOLETE: Property_Deprecated set for serializable member variables of this and derived classes. More...

Static Protected Attributes inherited from OpenSim::ModelComponent
static const SimTK::Vec3 InvalidScaleFactors
Returned by getScaleFactors() if the ScaleSet does not contain scale factors for the base Body associated with the specified Frame. More...

## Detailed Description

Generate a force that acts to limit the range of motion of a coordinate.

Force is experienced at upper and lower limits of the coordinate value according to a constant stiffnesses K_upper and K_lower, with a C2 continuous transition from 0 to K. The transition parameter defines how far beyond the limit the stiffness becomes constant. The integrator will like smoother (i.e. larger transition regions).

Damping factor is also phased in through the transition region from 0 to the value provided.

Limiting force is guaranteed to be zero within the upper and lower limits.

The potential energy stored in the spring component of the force is accessible as well as the power (nd optionally energy) dissipated.

## ◆ Self

This typedef might be useful within the member functions of this class.

This is generated by the OpenSim_DECLARE_*_OBJECT macros.

## ◆ Super

Use this typedef to refer to the superclass of this class.

Avoid using the explicit type name of the superclass; this would introduce bugs if the superclass is changed.

This is generated by the OpenSim_DECLARE_*_OBJECT macros.

## ◆ CoordinateLimitForce() [1/2]

 OpenSim::CoordinateLimitForce::CoordinateLimitForce ( )

Default constructor.

## ◆ CoordinateLimitForce() [2/2]

 OpenSim::CoordinateLimitForce::CoordinateLimitForce ( const std::string & coordName, double q_upper, double K_upper, double q_lower, double K_lower, double damping, double dq, bool computeDissipationEnergy = false )

Convenience constructor.

Generate a force that acts to limit the range of motion of a coordinate Force experienced at upper and lower limits of the coordinate (q) value is according to a linear stiffnesses K_upper and K_lower, with a C2 continuous transition from 0 to K. The transition parameter (dq) defines how far beyond the limit the stiffness becomes purely linear. The integrator will like smoother (i.e. larger transition regions).

Parameters
 [in] coordName Coordinate whose range is to be limited. [in] q_upper Coordinate's upper limit value. [in] K_upper Upper limit stiffness when coordinate > q_upper [in] q_lower Coordinate's lower limit value. [in] K_lower Lower limit stiffness when coordinate < q_lower [in] damping Damping factor when coordinate is beyond the limits [in] dq Transition region (displacement) for force to be engaged. [in] computeDissipationEnergy Whether to compute dissipated energy (false).

## ◆ ~CoordinateLimitForce()

 OpenSim::CoordinateLimitForce::~CoordinateLimitForce ( )
overridedefault

Destructor.

## ◆ assign()

 void OpenSim::CoordinateLimitForce::assign ( Object & aObject )
inlineoverride

This allows copy assignment in the Java GUI.

Exceptions
 Exception if the argument is not of type CoordinateLimitForce.

## ◆ calcLimitForce()

 double OpenSim::CoordinateLimitForce::calcLimitForce ( const SimTK::State & s ) const

Force calculation operator.

## ◆ clone()

 CoordinateLimitForce* OpenSim::CoordinateLimitForce::clone ( ) const
inlineoverridevirtual

Create a new heap-allocated copy of the concrete object to which this Object refers.

It is up to the caller to delete the returned object when no longer needed. Every concrete object deriving from Object implements this pure virtual method automatically, via the declaration macro it invokes (e.g., OpenSim_DECLARE_CONCRETE_OBJECT()). Note that the concrete class overrides modify the return type to be a pointer to the concrete object; that still overrides the base class method because the return type is covariant with (that is, derives from) Object.

Implements OpenSim::Force.

## ◆ computeForce()

 void OpenSim::CoordinateLimitForce::computeForce ( const SimTK::State & state, SimTK::Vector_< SimTK::SpatialVec > & bodyForces, SimTK::Vector & generalizedForces ) const
overrideprotectedvirtual

Subclasses must implement this method to compute the forces that should be applied to bodies and generalized speeds.

This is invoked by ForceAdapter to perform the force computation.

Reimplemented from OpenSim::Force.

## ◆ computePotentialEnergy()

 double OpenSim::CoordinateLimitForce::computePotentialEnergy ( const SimTK::State & s ) const
overridevirtual

Contribute this Force component's potential energy to the accounting of the total system energy.

Reimplemented from OpenSim::Force.

 void OpenSim::CoordinateLimitForce::extendAddToSystem ( SimTK::MultibodySystem & system ) const
overrideprotectedvirtual

Create the underlying Force that is part of the multibody system.

Reimplemented from OpenSim::Component.

## ◆ extendConnectToModel()

 void OpenSim::CoordinateLimitForce::extendConnectToModel ( Model & aModel )
overrideprotectedvirtual

Setup this CoordinateLimitForce as part of the model.

This were the existence of the coordinate to limit is checked.

Reimplemented from OpenSim::ModelComponent.

## ◆ get_compute_dissipation_energy()

 const bool& OpenSim::CoordinateLimitForce::get_compute_dissipation_energy ( ) const
inline

Get the value of the compute_dissipation_energy property.

## ◆ get_coordinate()

 const std::string& OpenSim::CoordinateLimitForce::get_coordinate ( ) const
inline

Get the value of the coordinate property.

## ◆ get_damping()

 const double& OpenSim::CoordinateLimitForce::get_damping ( ) const
inline

Get the value of the damping property.

## ◆ get_lower_limit()

 const double& OpenSim::CoordinateLimitForce::get_lower_limit ( ) const
inline

Get the value of the lower_limit property.

## ◆ get_lower_stiffness()

 const double& OpenSim::CoordinateLimitForce::get_lower_stiffness ( ) const
inline

Get the value of the lower_stiffness property.

## ◆ get_transition()

 const double& OpenSim::CoordinateLimitForce::get_transition ( ) const
inline

Get the value of the transition property.

## ◆ get_upper_limit()

 const double& OpenSim::CoordinateLimitForce::get_upper_limit ( ) const
inline

Get the value of the upper_limit property.

## ◆ get_upper_stiffness()

 const double& OpenSim::CoordinateLimitForce::get_upper_stiffness ( ) const
inline

Get the value of the upper_stiffness property.

## ◆ getClassName()

 static const std::string& OpenSim::CoordinateLimitForce::getClassName ( )
inlinestatic

This returns "CoordinateLimitForce".

See getConcreteClassName() if you want the class name of the underlying concrete object instead.

This is generated by the OpenSim_DECLARE_*_OBJECT macros.

## ◆ getConcreteClassName()

 const std::string& OpenSim::CoordinateLimitForce::getConcreteClassName ( ) const
inlineoverridevirtual

Returns the class name of the concrete Object-derived class of the actual object referenced by this Object, as a string.

This is the string that is used as the tag for this concrete object in an XML file. Every concrete class derived from Object automatically overrides this method via the declaration macro it uses. See getClassName() to get the class name of the referencing (possibly abstract) class rather than the concrete object.

getClassName()

Implements OpenSim::Force.

## ◆ getDamping()

 double OpenSim::CoordinateLimitForce::getDamping ( ) const

## ◆ getDissipatedEnergy()

 double OpenSim::CoordinateLimitForce::getDissipatedEnergy ( const SimTK::State & s ) const

Obtain energy dissipated by this CoordinateLimitForce over time in units of energy in J.

Parameters
 [in] s The State from which to obtain the current value of dissipated energy
Returns
The dissipated energy (a nonnegative scalar).

## ◆ getLowerLimit()

 double OpenSim::CoordinateLimitForce::getLowerLimit ( ) const

## ◆ getLowerStiffness()

 double OpenSim::CoordinateLimitForce::getLowerStiffness ( ) const

## ◆ getPowerDissipation()

 double OpenSim::CoordinateLimitForce::getPowerDissipation ( const SimTK::State & s ) const

Obtain the rate at which energy is being dissipated by this CoordinateLimit, that is, the power being lost.

This is in units of energy/time which is watts in J/s.

Parameters
 [in] s The State from which to obtain the current value of the power dissipation.
Returns
The dissipated power (a nonnegative scalar).
getDissipatedEnergy() for the time-integrated power loss

## ◆ getRecordLabels()

 Array OpenSim::CoordinateLimitForce::getRecordLabels ( ) const
overridevirtual

Methods to query a Force for the value actually applied during simulation The names of quantities (column labels) are returned by getRecordLabels()

Reimplemented from OpenSim::Force.

## ◆ getRecordValues()

 Array OpenSim::CoordinateLimitForce::getRecordValues ( const SimTK::State & state ) const
overridevirtual

Given SimTK::State object extract all the values necessary to report forces, application location frame, etc.

used in conjunction with getRecordLabels and should return same size Array

Reimplemented from OpenSim::Force.

## ◆ getTransition()

 double OpenSim::CoordinateLimitForce::getTransition ( ) const

## ◆ getUpperLimit()

 double OpenSim::CoordinateLimitForce::getUpperLimit ( ) const

## ◆ getUpperStiffness()

 double OpenSim::CoordinateLimitForce::getUpperStiffness ( ) const

## ◆ isComputingDissipationEnergy()

 bool OpenSim::CoordinateLimitForce::isComputingDissipationEnergy ( ) const

## ◆ safeDownCast()

 static CoordinateLimitForce* OpenSim::CoordinateLimitForce::safeDownCast ( OpenSim::Object * obj )
inlinestatic

For use in MATLAB and Python to access the concrete class.

Example: cObj = CoordinateLimitForce.safeDownCast(obj). This is equivalent to dynamic_cast<CoordinateLimitForce*>(obj)` in C++.

## ◆ set_compute_dissipation_energy()

 void OpenSim::CoordinateLimitForce::set_compute_dissipation_energy ( const bool & value )
inline

Set the value of the compute_dissipation_energy property.

## ◆ set_coordinate()

 void OpenSim::CoordinateLimitForce::set_coordinate ( const std::string & value )
inline

Set the value of the coordinate property.

## ◆ set_damping()

 void OpenSim::CoordinateLimitForce::set_damping ( const double & value )
inline

Set the value of the damping property.

## ◆ set_lower_limit()

 void OpenSim::CoordinateLimitForce::set_lower_limit ( const double & value )
inline

Set the value of the lower_limit property.

## ◆ set_lower_stiffness()

 void OpenSim::CoordinateLimitForce::set_lower_stiffness ( const double & value )
inline

Set the value of the lower_stiffness property.

## ◆ set_transition()

 void OpenSim::CoordinateLimitForce::set_transition ( const double & value )
inline

Set the value of the transition property.

## ◆ set_upper_limit()

 void OpenSim::CoordinateLimitForce::set_upper_limit ( const double & value )
inline

Set the value of the upper_limit property.

## ◆ set_upper_stiffness()

 void OpenSim::CoordinateLimitForce::set_upper_stiffness ( const double & value )
inline

Set the value of the upper_stiffness property.

## ◆ setComputeDissipationEnergy()

 void OpenSim::CoordinateLimitForce::setComputeDissipationEnergy ( bool flag )

Option to compute the dissipation energy due to damping in the CoordinateLimitForce.

If true the dissipation power is automatically integrated to provide energy. Default is false.

## ◆ setDamping()

 void OpenSim::CoordinateLimitForce::setDamping ( double aDamping )

Damping factor on the coordinate's speed applied only when limit is exceeded.

For translational has units N/(m/s) and rotational has Nm/(degree/s).

## ◆ setLowerLimit()

 void OpenSim::CoordinateLimitForce::setLowerLimit ( double aLowerLimit )

Lower limit of the coordinate range of motion (rotations in degrees).

## ◆ setLowerStiffness()

 void OpenSim::CoordinateLimitForce::setLowerStiffness ( double aLowerStiffness )

Stiffness of the passive limit force when coordinate exceeds lower limit.

Note, rotational stiffness expected in N*m/degree.

## ◆ setTransition()

 void OpenSim::CoordinateLimitForce::setTransition ( double aTransition )

Transition region width with lengths is m and angles in degrees).

Specifies the transition from zero to a constant stiffness as coordinate exceeds its limit.

## ◆ setUpperLimit()

 void OpenSim::CoordinateLimitForce::setUpperLimit ( double aUpperLimit )

Upper limit of the coordinate range of motion (rotations in degrees).

## ◆ setUpperStiffness()

 void OpenSim::CoordinateLimitForce::setUpperStiffness ( double aUpperStiffness )

Stiffness of the passive limit force when coordinate exceeds upper limit.

Note, rotational stiffness expected in N*m/degree.

## ◆ upd_compute_dissipation_energy()

 bool& OpenSim::CoordinateLimitForce::upd_compute_dissipation_energy ( )
inline

Get a writable reference to the compute_dissipation_energy property.

## ◆ upd_coordinate()

 std::string& OpenSim::CoordinateLimitForce::upd_coordinate ( )
inline

Get a writable reference to the coordinate property.

## ◆ upd_damping()

 double& OpenSim::CoordinateLimitForce::upd_damping ( )
inline

Get a writable reference to the damping property.

## ◆ upd_lower_limit()

 double& OpenSim::CoordinateLimitForce::upd_lower_limit ( )
inline

Get a writable reference to the lower_limit property.

## ◆ upd_lower_stiffness()

 double& OpenSim::CoordinateLimitForce::upd_lower_stiffness ( )
inline

Get a writable reference to the lower_stiffness property.

## ◆ upd_transition()

 double& OpenSim::CoordinateLimitForce::upd_transition ( )
inline

Get a writable reference to the transition property.

## ◆ upd_upper_limit()

 double& OpenSim::CoordinateLimitForce::upd_upper_limit ( )
inline

Get a writable reference to the upper_limit property.

## ◆ upd_upper_stiffness()

 double& OpenSim::CoordinateLimitForce::upd_upper_stiffness ( )
inline

Get a writable reference to the upper_stiffness property.

## ◆ compute_dissipation_energy

 bool OpenSim::CoordinateLimitForce::compute_dissipation_energy

"Option to compute the dissipation energy due to damping in the " "CoordinateLimitForce. If true the dissipation power is automatically " "integrated to provide energy. Default is false."

This property appears in XML files under the tag <compute_dissipation_energy>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

get_compute_dissipation_energy(), upd_compute_dissipation_energy(), set_compute_dissipation_energy()

## ◆ coordinate

 std::string OpenSim::CoordinateLimitForce::coordinate

"Coordinate (name) to be limited."

This property appears in XML files under the tag <coordinate>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

get_coordinate(), upd_coordinate(), set_coordinate()

## ◆ damping

 double OpenSim::CoordinateLimitForce::damping

"Damping factor on the coordinate's speed applied only when limit " "is exceeded. For translational has units N/(m/s) and rotational has " "Nm/(degree/s)"

This property appears in XML files under the tag <damping>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

get_damping(), upd_damping(), set_damping()

## ◆ lower_limit

 double OpenSim::CoordinateLimitForce::lower_limit

"The lower limit of the coordinate range of motion (rotations in " "degrees)."

This property appears in XML files under the tag <lower_limit>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

get_lower_limit(), upd_lower_limit(), set_lower_limit()

## ◆ lower_stiffness

 double OpenSim::CoordinateLimitForce::lower_stiffness

"Stiffness of the passive limit force when coordinate exceeds lower " "limit. Note, rotational stiffness expected in N*m/degree."

This property appears in XML files under the tag <lower_stiffness>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

get_lower_stiffness(), upd_lower_stiffness(), set_lower_stiffness()

## ◆ transition

 double OpenSim::CoordinateLimitForce::transition

"Transition region width in the units of the coordinate (rotations " "in degrees). Dictates the transition from zero to constant stiffness " "as coordinate exceeds its limit."

This property appears in XML files under the tag <transition>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

get_transition(), upd_transition(), set_transition()

## ◆ upper_limit

 double OpenSim::CoordinateLimitForce::upper_limit

"The upper limit of the coordinate range of motion (rotations in " "degrees)."

This property appears in XML files under the tag <upper_limit>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

get_upper_limit(), upd_upper_limit(), set_upper_limit()

## ◆ upper_stiffness

 double OpenSim::CoordinateLimitForce::upper_stiffness

"Stiffness of the passive limit force when coordinate exceeds upper " "limit. Note, rotational stiffness expected in N*m/degree."

This property appears in XML files under the tag <upper_stiffness>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.