A class for storing an array of values of type T. More...

Public Member Functions
virtual	~Array ()
	Destructor. More...

	Array (const T &aDefaultValue=T(), int aSize=0, int aCapacity=Array_CAPMIN)
	Default constructor. More...

	Array (const Array< T > &aArray)
	Copy constructor. More...

bool	arrayEquals (const Array< T > &aArray) const

T &	operator[] (int aIndex) const
	Get the array element at a specified index. More...

Array< T > &	operator= (const Array< T > &aArray)
	Assign this array to a specified array. More...

bool	operator== (const Array< T > &aArray) const
	Determine if two arrays are equal. More...

bool	computeNewCapacity (int aMinCapacity, int &rNewCapacity)
	Compute a new capacity that is at least as large as a specified minimum capacity; this method does not change the capacity, it simply computes a new recommended capacity. More...

bool	ensureCapacity (int aCapacity)
	Ensure that the capacity of this array is at least the specified amount. More...

void	trim ()
	Trim the capacity of this array so that it is one larger than the size of this array. More...

int	getCapacity () const
	Get the capacity of this storage instance. More...

void	setCapacityIncrement (int aIncrement)
	Set the amount by which the capacity is increased when the capacity of of the array in exceeded. More...

int	getCapacityIncrement () const
	Get the amount by which the capacity is increased. More...

bool	setSize (int aSize)
	Set the size of the array. More...

int	getSize () const
	Get the size of the array. More...

int	size () const
	Alternate name for getSize(). More...

int	append (const T &aValue)
	Append a value onto the array. More...

int	append (const Array< T > &aArray)
	Append an array of values. More...

int	append (int aSize, const T *aArray)
	Append an array of values. More...

int	insert (int aIndex, const T &aValue)
	Insert a value into the array at a specified index. More...

int	remove (int aIndex)
	Remove a value from the array at a specified index. More...

void	set (int aIndex, const T &aValue)
	Set the value at a specified index. More...

T *	get ()
	Get a pointer to the low-level array. More...

const T *	get () const
	Get a pointer to the low-level array. More...

const T &	get (int aIndex) const
	Get a const reference to the value at a specified array index. More...

T &	updElt (int aIndex) const
	Get a writable reference to value at a specified array index. More...

const T &	getLast () const
	Get the last value in the array. More...

T &	updLast () const
	Get writable reference to last value in the array. More...

int	findIndex (const T &aValue) const
	Linear search for an element matching a given value. More...

int	rfindIndex (const T &aValue) const
	Linear search in reverse for an element matching a given value. More...

int	searchBinary (const T &aValue, bool aFindFirst=false, int aLo=-1, int aHi=-1) const
	Search for the largest value in the array that is less than or equal to a specified value. More...

Protected Attributes
int	_size
	Size of the array. More...

int	_capacity
	Current capacity of the array. More...

int	_capacityIncrement
	Increment by which the current capacity is increased when the capacity of this storage instance is reached. More...

T	_defaultValue
	Default value of elements. More...

T *	_array
	Array of values. More...

Friends
std::ostream &	operator<< (std::ostream &aOut, const Array< T > &aArray)
	Implementation of the output operator. More...

std::istream &	operator>> (std::istream &in, Array< T > &out)

Detailed Description

template<class T>
class OpenSim::Array< T >

A class for storing an array of values of type T.

The capacity of the class grows as needed. To use this template for a class of type T, class T should implement the following methods: default constructor, copy constructor, assignment operator (=), equality operator (==), and less than operator (<).

Version: 1.0

Author: Frank C. Anderson

Constructor & Destructor Documentation

◆ ~Array()

template<class T>

virtual OpenSim::Array< T >::~Array ( )

inlinevirtual

Destructor.

When the array is deleted, references to elements of this array become invalid.

◆ Array() [1/2]

template<class T>

OpenSim::Array< T >::Array	(	const T &	aDefaultValue = `T()`,
		int	aSize = `0`,
		int	aCapacity = `Array_CAPMIN`
	)

inlineexplicit

Default constructor.

Parameters

aDefaultValue	Default value of an array element. This value is used to initialize array elements as the size of the array is changed.
aSize	Initial size of the array. The array elements are initialized to aDefaultValue.
aCapacity	Initial capacity of the array. The initial capacity is guaranteed to be at least as large as aSize + 1.

◆ Array() [2/2]

template<class T>

OpenSim::Array< T >::Array ( const Array< T > & aArray )

inline

Copy constructor.

Parameters

aArray Array to be copied.

Member Function Documentation

◆ append() [1/3]

template<class T>

int OpenSim::Array< T >::append ( const T & aValue )

inline

Append a value onto the array.

Parameters

aValue Value to be appended.

Returns: New size of the array, or, equivalently, the index to the new first empty element of the array.

Referenced by OpenSim::Array< OpenSim::Object *>::append(), OpenSim::MocoBounds::getAsArray(), OpenSim::TransformAxis::getCoordinateNamesInArray(), OpenSim::Set< Force, ModelComponent >::getGroupNames(), OpenSim::Set< Force, ModelComponent >::getGroupNamesContaining(), OpenSim::CoordinateCouplerConstraint::getIndependentCoordinateNames(), OpenSim::Set< Force, ModelComponent >::getNames(), OpenSim::StationPlaneContactForce::getRecordLabels(), OpenSim::Ligament::getRecordLabels(), OpenSim::PathSpring::getRecordLabels(), OpenSim::ScalarActuator::getRecordLabels(), OpenSim::StationPlaneContactForce::getRecordValues(), OpenSim::Ligament::getRecordValues(), OpenSim::PathSpring::getRecordValues(), and OpenSim::ScalarActuator::getRecordValues().

◆ append() [2/3]

template<class T>

int OpenSim::Array< T >::append ( const Array< T > & aArray )

inline

Append an array of values.

Parameters

aArray Array of values to append.

Returns: New size of the array, or, equivalently, the index to the new first empty element of the array.

◆ append() [3/3]

template<class T>

int OpenSim::Array< T >::append	(	int	aSize,
		const T *	aArray
	)

inline

Append an array of values.

Parameters

aSize	Size of the array to append.
aArray	Array of values to append.

Returns: New size of the array, or, equivalently, the index to the new first empty element of the array.

◆ arrayEquals()

template<class T>

bool OpenSim::Array< T >::arrayEquals ( const Array< T > & aArray ) const

inline

◆ computeNewCapacity()

template<class T>

bool OpenSim::Array< T >::computeNewCapacity	(	int	aMinCapacity,
		int &	rNewCapacity
	)

inline

Compute a new capacity that is at least as large as a specified minimum capacity; this method does not change the capacity, it simply computes a new recommended capacity.

If the capacity increment is negative, the current capacity is doubled until the computed capacity is greater than or equal to the specified minimum capacity. If the capacity increment is positive, the current capacity increment by this amount until the computed capacity is greater than or equal to the specified minimum capacity. If the capacity increment is zero, the computed capacity is set to the current capacity and false is returned.

Parameters

rNewCapacity	New computed capacity.
aMinCapacity	Minimum new computed capacity. The computed capacity is incremented until it is at least as large as aMinCapacity, assuming the capacity increment is not zero.

Returns: True if the new capacity was increased, false otherwise (i.e., if the capacity increment is set to 0).

See also: setCapacityIncrement()

Referenced by OpenSim::Array< OpenSim::Object *>::append(), OpenSim::Array< OpenSim::Object *>::Array(), OpenSim::Array< OpenSim::Object *>::insert(), OpenSim::Array< OpenSim::Object *>::set(), and OpenSim::Array< OpenSim::Object *>::setSize().

◆ ensureCapacity()

template<class T>

bool OpenSim::Array< T >::ensureCapacity ( int aCapacity )

inline

Ensure that the capacity of this array is at least the specified amount.

Note that the newly allocated array elements are not initialized.

Parameters

aCapacity Desired capacity.

Returns: true if the capacity was successfully obtained, false otherwise.

Referenced by OpenSim::Array< OpenSim::Object *>::append(), OpenSim::Array< OpenSim::Object *>::Array(), OpenSim::Array< OpenSim::Object *>::insert(), OpenSim::Array< OpenSim::Object *>::set(), and OpenSim::Array< OpenSim::Object *>::setSize().

◆ findIndex()

template<class T>

int OpenSim::Array< T >::findIndex ( const T & aValue ) const

inline

Linear search for an element matching a given value.

Parameters

aValue Value to which the array elements are compared.

Returns: Index of the array element matching aValue. If there is more than one such elements with the same value the index of the first of these elements is returned. If no match is found, -1 is returned.

◆ get() [1/3]

template<class T>

T* OpenSim::Array< T >::get ( )

inline

Get a pointer to the low-level array.

Returns: Pointer to the low-level array.

Referenced by OpenSim::MarkerPair::getMarkerName().

◆ get() [2/3]

template<class T>

const T* OpenSim::Array< T >::get ( ) const

inline

Get a pointer to the low-level array.

Returns: Pointer to the low-level array.

◆ get() [3/3]

template<class T>

const T& OpenSim::Array< T >::get ( int aIndex ) const

inline

Get a const reference to the value at a specified array index.

If the index is negative or passed the end of the array, an exception is thrown.

For faster execution, the array elements can be accessed through the overloaded operator[], which does no bounds checking.

Parameters

aIndex Index of the desired array element.

Returns: const reference to the array element.

Exceptions

Exception if (aIndex<0)||(aIndex>=_size).

See also: operator[].

◆ getCapacity()

template<class T>

int OpenSim::Array< T >::getCapacity ( ) const

inline

Get the capacity of this storage instance.

◆ getCapacityIncrement()

template<class T>

int OpenSim::Array< T >::getCapacityIncrement ( ) const

inline

Get the amount by which the capacity is increased.

◆ getLast()

template<class T>

const T& OpenSim::Array< T >::getLast ( ) const

inline

Get the last value in the array.

Returns: Last value in the array.

Exceptions

Exception if the array is empty.

◆ getSize()

template<class T>

int OpenSim::Array< T >::getSize ( ) const

inline

Get the size of the array.

Returns: Size of the array.

Referenced by OpenSim::Array< OpenSim::Object *>::append(), OpenSim::PropertyBoolArray::getArraySize(), OpenSim::PropertyIntArray::getArraySize(), OpenSim::PropertyStrArray::getArraySize(), OpenSim::PropertyDblArray::getArraySize(), OpenSim::MarkerPair::getMarkerName(), OpenSim::PiecewiseConstantFunction::getNumberOfPoints(), OpenSim::PiecewiseLinearFunction::getNumberOfPoints(), OpenSim::SimmSpline::getNumberOfPoints(), OpenSim::GCVSpline::getNumberOfPoints(), OpenSim::Storage::getSize(), OpenSim::XMLDocument::hasDefaultObjects(), OpenSim::PropertyDblVec_< 3 >::setValue(), and OpenSim::Array< OpenSim::Object *>::size().

◆ insert()

template<class T>

int OpenSim::Array< T >::insert	(	int	aIndex,
		const T &	aValue
	)

inline

Insert a value into the array at a specified index.

This method is relatively computationally costly since many of the array elements may need to be shifted.

Parameters

aValue	Value to be inserted.
aIndex	Index at which to insert the new value. All current elements from aIndex to the end of the array are shifted one place in the direction of the end of the array. If the specified index is greater than the current size of the array, the size of the array is increased to aIndex+1 and the intervening new elements are initialized to the default value that was specified at the time of construction.

Returns: Size of the array after the insertion.

◆ operator=()

template<class T>

Array<T>& OpenSim::Array< T >::operator= ( const Array< T > & aArray )

inline

Assign this array to a specified array.

This operator makes a complete copy of the specified array; all member variables are copied. So, the result is two identical, independent arrays.

Parameters

aArray Array to be copied.

Returns: Reference to this array.

◆ operator==()

template<class T>

bool OpenSim::Array< T >::operator== ( const Array< T > & aArray ) const

inline

Determine if two arrays are equal.

Two arrays are equal if their contents are equal. That is, each array must be the same length and their corresponding array elements must be equal.

Parameters

aArray Array to be tested as equal.

Returns: True if equal, false if not equal.

◆ operator[]()

template<class T>

T& OpenSim::Array< T >::operator[] ( int aIndex ) const

inline

Get the array element at a specified index.

This overloaded operator can be used both to set and get element values:

Array<T> array(2);
T value = array[i];
array[i] = value;

This operator is intended for accessing array elements with as little overhead as possible, so no error checking is performed. The caller must make sure the specified index is within the bounds of the array. If error checking is desired, use Array::get().

Parameters

aIndex Index of the desired element (0 <= aIndex < _size).

Returns: Reference to the array element.

See also: get().

◆ remove()

template<class T>

int OpenSim::Array< T >::remove ( int aIndex )

inline

Remove a value from the array at a specified index.

This method is relatively computationally costly since many of the array elements may need to be shifted.

Parameters

aIndex Index of the value to remove. All elements from aIndex to the end of the array are shifted one place toward the beginning of the array. If aIndex is less than 0 or greater than or equal to the current size of the array, no element is removed.

Returns: Size of the array after the removal.

◆ rfindIndex()

template<class T>

int OpenSim::Array< T >::rfindIndex ( const T & aValue ) const

inline

Linear search in reverse for an element matching a given value.

Parameters

aValue Value to which the array elements are compared.

Returns: Index of the array element matching aValue. If there is more than one such elements with the same value the index of the last of these elements is returned. If no match is found, -1 is returned.

◆ searchBinary()

template<class T>

int OpenSim::Array< T >::searchBinary	(	const T &	aValue,
		bool	aFindFirst = `false`,
		int	aLo = `-1`,
		int	aHi = `-1`
	)		const

inline

Search for the largest value in the array that is less than or equal to a specified value.

If there is more than one element with this largest value, the index of the first of these elements can optionally be found, but this can be up to twice as costly.

This method assumes that the array element values monotonically increase as the array index increases. Note that monotonically increase means never decrease, so it is permissible for elements to

A binary search is performed (i.e., the array is repeatedly subdivided into two bins one of which must contain the specified until the appropriate element is identified), so the performance of this method is approximately ln(n), where n is the size of the array.

Parameters

aValue	Value to which the array elements are compared.
aFindFirst	If true, find the first element that satisfies the search. If false, the index of any element that satisfies the search can be returned- which index will be returned depends on the length of the array and is therefore somewhat arbitrary. By default, this flag is false.
aLo	Lowest array index to consider in the search.
aHi	Highest array index to consider in the search.

Returns: Index of the array element that has the largest value that is less than or equal to aValue. If there is more than one such elements with the same value and aFindFirst is set to true, the index of the first of these elements is returned. If an error is encountered (e.g., the array is empty), or the array contains no element that is less than or equal to aValue, -1 is returned.

◆ set()

template<class T>

void OpenSim::Array< T >::set	(	int	aIndex,
		const T &	aValue
	)

inline

Set the value at a specified index.

Parameters

aIndex	Index of the array element to be set. It is permissible for aIndex to be past the current end of the array- the capacity will be increased if necessary. Values between the current end of the array and aIndex are not initialized.
aValue	Value.

Referenced by OpenSim::MarkerPair::setMarkerName().

◆ setCapacityIncrement()

template<class T>

void OpenSim::Array< T >::setCapacityIncrement ( int aIncrement )

inline

Set the amount by which the capacity is increased when the capacity of of the array in exceeded.

If the specified increment is negative, the capacity is set to double whenever the capacity is exceeded.

Parameters

aIncrement Desired capacity increment.

◆ setSize()

template<class T>

bool OpenSim::Array< T >::setSize ( int aSize )

inline

Set the size of the array.

This method can be used to either increase or decrease the size of the array. If this size of the array is increased, the new elements are initialized to the default value that was specified at the time of construction.

Note that the size of an array is different than its capacity. The size indicates how many valid elements are stored in an array. The capacity indicates how much the size of the array can be increased without allocated more memory. At all times size <= capacity.

Parameters

aSize Desired size of the array. The size must be greater than or equal to zero.

Referenced by OpenSim::PropertyBoolArray::clearValues(), OpenSim::PropertyIntArray::clearValues(), OpenSim::PropertyStrArray::clearValues(), OpenSim::PropertyDblArray::clearValues(), OpenSim::Set< Force, ModelComponent >::getGroupNames(), OpenSim::Set< Force, ModelComponent >::getGroupNamesContaining(), OpenSim::Array< OpenSim::Object *>::insert(), OpenSim::PropertyDblVec_< 3 >::PropertyDblVec_(), and OpenSim::Storage::purge().

◆ size()

template<class T>

int OpenSim::Array< T >::size ( ) const

inline

Alternate name for getSize().

◆ trim()

template<class T>

void OpenSim::Array< T >::trim ( )

inline

Trim the capacity of this array so that it is one larger than the size of this array.

This is useful for reducing the amount of memory used by this array. This capacity is kept at one larger than the size so that, for example, an array of characters can be treated as a NULL terminated string.

◆ updElt()

template<class T>

T& OpenSim::Array< T >::updElt ( int aIndex ) const

inline

Get a writable reference to value at a specified array index.

If the index is negative or passed the end of the array, an exception is thrown.

For faster execution, the array elements can be accessed through the overloaded operator[], which does no bounds checking.

Parameters

aIndex Index of the desired array element.

Returns: Writable reference to the array element.

Exceptions

Exception if (aIndex<0)||(aIndex>=_size).

See also: operator[].

◆ updLast()

template<class T>

T& OpenSim::Array< T >::updLast ( ) const

inline

Get writable reference to last value in the array.

Returns: writable reference to Last value in the array.

Exceptions

Exception if the array is empty.

Friends And Related Function Documentation

◆ operator<<

template<class T>

std::ostream& operator<<	(	std::ostream &	aOut,
		const Array< T > &	aArray
	)

friend

Implementation of the output operator.

The output for an array looks like the following:

T[0] T[1] T[2] ... T[size-1].

Parameters

aOut	Output stream.
aArray	Array to be output.

Returns: Reference to the output stream.

◆ operator>>

template<class T>

std::istream& operator>>	(	std::istream &	in,
		Array< T > &	out
	)

friend

Member Data Documentation

◆ _array

template<class T>

T* OpenSim::Array< T >::_array

protected

Array of values.

Referenced by OpenSim::Array< OpenSim::Object *>::ensureCapacity(), OpenSim::Array< OpenSim::Object *>::operator=(), OpenSim::Array< OpenSim::Object *>::operator==(), OpenSim::Array< OpenSim::Object *>::trim(), and OpenSim::Array< OpenSim::Object *>::~Array().

◆ _capacity

template<class T>

int OpenSim::Array< T >::_capacity

protected

Current capacity of the array.

Referenced by OpenSim::Array< OpenSim::Object *>::computeNewCapacity(), OpenSim::Array< OpenSim::Object *>::operator=(), and OpenSim::Array< OpenSim::Object *>::set().

◆ _capacityIncrement

template<class T>

int OpenSim::Array< T >::_capacityIncrement

protected

Increment by which the current capacity is increased when the capacity of this storage instance is reached.

If negative, capacity doubles.

Referenced by OpenSim::Array< OpenSim::Object *>::computeNewCapacity(), and OpenSim::Array< OpenSim::Object *>::operator=().

◆ _defaultValue

template<class T>

T OpenSim::Array< T >::_defaultValue

protected

Default value of elements.

Referenced by OpenSim::Array< OpenSim::Object *>::operator=(), and OpenSim::Array< OpenSim::Object *>::remove().

◆ _size

template<class T>

int OpenSim::Array< T >::_size

protected

Size of the array.

Also the index of the first empty array element.

Referenced by OpenSim::Array< OpenSim::Object *>::append(), OpenSim::Array< OpenSim::Object *>::ensureCapacity(), OpenSim::Array< OpenSim::Object *>::findIndex(), OpenSim::Array< OpenSim::Object *>::get(), OpenSim::Array< OpenSim::Object *>::operator=(), OpenSim::Array< OpenSim::Object *>::operator==(), OpenSim::Array< OpenSim::Object *>::remove(), and OpenSim::Array< OpenSim::Object *>::trim().

The documentation for this class was generated from the following file:

OpenSim/Common/Array.h

Public Member Functions

Protected Attributes

Friends

Detailed Description

template<class T> class OpenSim::Array< T >

Constructor & Destructor Documentation

◆ ~Array()

◆ Array() [1/2]

◆ Array() [2/2]

Member Function Documentation

◆ append() [1/3]

◆ append() [2/3]

◆ append() [3/3]

◆ arrayEquals()

◆ computeNewCapacity()

◆ ensureCapacity()

◆ findIndex()

◆ get() [1/3]

◆ get() [2/3]

◆ get() [3/3]

◆ getCapacity()

◆ getCapacityIncrement()

◆ getLast()

◆ getSize()

◆ insert()

◆ operator=()

◆ operator==()

◆ operator[]()

◆ remove()

◆ rfindIndex()

◆ searchBinary()

◆ set()

◆ setCapacityIncrement()

◆ setSize()

◆ size()

◆ trim()

◆ updElt()

◆ updLast()

Friends And Related Function Documentation

◆ operator<<

◆ operator>>

Member Data Documentation

◆ _array

◆ _capacity

◆ _capacityIncrement

◆ _defaultValue

◆ _size

template<class T>
class OpenSim::Array< T >