This goal permits the integration of only positive or negative values from a model Output. More...

Inheritance diagram for OpenSim::MocoOutputExtremumGoal:

OpenSim Properties, Sockets, Outputs, Inputs
Properties (single-value)
std::string	extremum_type
	"The type of extremum to be taken in the goal." "'minimum' or 'maximum'" "(Default extremum type = 'minimum')." More...

double	smoothing_factor
	"The smoothing factor applied in the approximation of the " "extremum function (default = 1.0). This property can be set " "between [0.2, 1.0]. For Outputs that may take on large values " "(> ~2000) during a simulation, it is recommended to set this " "property closer to 0.2." More...

OpenSim Properties, Sockets, Outputs, Inputs inherited from OpenSim::MocoOutputBase
std::string	output_path
	"The absolute path to the output in the model to use as the " "integrand for this goal." More...

int	exponent
	"The exponent applied to the output value in the integrand. " "The output can take on negative values in the integrand when the " "exponent is set to 1 (the default value). When the exponent is " "set to a value greater than 1, the absolute value function is " "applied to the output (before the exponent is applied), meaning " "that odd numbered exponents (greater than 1) do not take on " "negative values." More...

int	output_index
	"The index to the value to be minimized when a vector type " "Output is specified. For SpatialVec Outputs, indices 0, 1, " "and 2 refer to the rotational components and indices 3, 4, " "and 5 refer to the translational components. A value of -1 " "indicates to minimize the vector norm (default: -1)." More...

OpenSim Properties, Sockets, Outputs, Inputs inherited from OpenSim::MocoGoal
bool	enabled
	"This bool indicates whether this goal is enabled." More...

double	weight
	"In cost mode, the goal is multiplied by this weight (default: " "1)." More...

bool	divide_by_displacement
	"Divide by the model's displacement over the phase (default: " "false)" More...

bool	divide_by_duration
	"Divide by the phase duration (default: false)" More...

bool	divide_by_mass
	"Divide by the model's mass (default: false)" More...

std::string	mode
	"'cost' to enforce as a penalty, 'endpoint_constraint' to enforce " "as a constraint." More...

MocoConstraintInfo	MocoConstraintInfo
	"The bounds and labels for this MocoGoal, if applied as an " "endpoint constraint." More...

MocoScaleFactor	scale_factors
	"Scale factors added by derived MocoGoal classes that are optimized " "via a MocoParameter. A copy of each MocoScaleFactor component is " "added to the model internal to MocoProblem, which makes the scale " "factors values available when computing the cost function for each " "MocoGoal." More...

Public Member Functions
	MocoOutputExtremumGoal ()

	MocoOutputExtremumGoal (std::string name)

	MocoOutputExtremumGoal (std::string name, double weight)

void	setExtremumType (std::string extremum_type)
	Set the type of extremum ('minimum' or 'maximum') to be applied to the output variable of choice. More...

std::string	getExtremumType () const

void	setSmoothingFactor (double smoothing_factor)
	Set the smoothing factor used for the extremum approximation (default = 1.0). More...

double	getSmoothingFactor () const

Public Member Functions inherited from OpenSim::MocoOutputBase
	MocoOutputBase ()

	MocoOutputBase (std::string name)

	MocoOutputBase (std::string name, double weight)

void	setOutputPath (std::string path)
	Set the absolute path to the output in the model to use as the integrand for this goal. More...

const std::string &	getOutputPath () const

void	setExponent (int exponent)
	Set the exponent applied to the output value in the integrand. More...

int	getExponent () const

void	setOutputIndex (int index)
	Set the index to the value to be minimized when a vector type Output is specified. More...

int	getOutputIndex () const

void	assign (Object &aObject) override
	This allows copy assignment in the Java GUI. More...

Public Member Functions inherited from OpenSim::MocoGoal
	MocoGoal ()

	MocoGoal (std::string name)

	MocoGoal (std::string name, double weight)

void	setEnabled (bool enabled)
	Set whether this goal is used in the problem. More...

bool	getEnabled () const

void	setWeight (double weight)
	In cost mode, the goal is multiplied by this weight. More...

double	getWeight () const

void	setMode (std::string mode)
	Set the mode property to either 'cost' or 'endpoint_constraint'. More...

std::string	getModeAsString () const
	This returns the default mode of the goal, unless the user overrode the default using setMode(). More...

Mode	getMode () const

bool	getModeIsCost () const

bool	getModeIsEndpointConstraint () const

Mode	getDefaultMode () const
	Types of goals have a class-level default for whether they are enforced as a cost or endpoint constraint. More...

bool	getSupportsEndpointConstraint () const
	Can this goal be used in endpoint constraint mode? More...

const MocoConstraintInfo &	getConstraintInfo () const
	Get bounds for the constraints that are enforced when using this goal in endpoint constraint mode. More...

MocoConstraintInfo &	updConstraintInfo ()

void	setEndpointConstraintBounds (const std::vector< MocoBounds > &bounds)
	Set the vector of endpoint constraint bounds for this MocoGoal. More...

std::vector< MocoBounds >	getEndpointConstraintBounds () const
	Get the vector of the endpoint constraint bounds for this MocoGoal. More...

int	getNumOutputs () const
	Get the length of the return value of calcGoal(). More...

int	getNumIntegrals () const
	Get the number of integrals required by this cost. More...

SimTK::Stage	getStageDependency () const
	Obtain the stage that this goal depends on. More...

SimTK::Real	calcIntegrand (const IntegrandInput &input) const
	Calculate the integrand that should be integrated and passed to calcCost(). More...

void	calcGoal (const GoalInput &input, SimTK::Vector &goal) const
	In cost mode, the returned cost includes the weight, and the elements of the returned vector should be summed by the caller to obtain the total cost. More...

void	initializeOnModel (const Model &model) const
	Perform error checks on user input for this goal, and cache quantities needed when computing the goal value. More...

std::vector< MocoScaleFactor >	getScaleFactors () const
	Get a vector of the MocoScaleFactors added to this MocoGoal. More...

void	printDescription () const
	Print the name type and mode of this goal. More...

void	setDivideByDisplacement (bool tf)
	Set if the goal should be divided by the displacement of the system's center of mass over the phase. More...

bool	getDivideByDisplacement () const

void	setDivideByDuration (bool tf)
	Set if the goal should be divided by the phase duration. More...

bool	getDivideByDuration () const

void	setDivideByMass (bool tf)
	Set if the goal should be divided by the model's mass. More...

bool	getDivideByMass () const

void	assign (Object &aObject) override
	This allows copy assignment in the Java GUI. More...

Public Member Functions inherited from OpenSim::Object
virtual	~Object ()
	Virtual destructor for cleanup. More...

bool	isEqualTo (const Object &aObject) const
	Equality operator wrapper for use from languages not supporting operator overloading. More...

Object &	operator= (const Object &aObject)
	Copy assignment copies he base class fields, including the properties. More...

virtual bool	operator== (const Object &aObject) const
	Determine if two objects are equal. More...

virtual bool	operator< (const Object &aObject) const
	Provide an ordering for objects so they can be put in sorted containers. More...

void	setName (const std::string &name)
	Set the name of the Object. More...

const std::string &	getName () const
	Get the name of this Object. More...

void	setDescription (const std::string &description)
	Set description, a one-liner summary. More...

const std::string &	getDescription () const
	Get description, a one-liner summary. More...

const std::string &	getAuthors () const
	Get Authors of this Object. More...

void	setAuthors (const std::string &authors)
	Set Authors of this object. More...

const std::string &	getReferences () const
	Get references or publications to cite if using this object. More...

void	setReferences (const std::string &references)
	Set references or publications to cite if using this object. More...

int	getNumProperties () const
	Determine how many properties are stored with this Object. More...

const AbstractProperty &	getPropertyByIndex (int propertyIndex) const
	Get a const reference to a property by its index number, returned as an AbstractProperty. More...

AbstractProperty &	updPropertyByIndex (int propertyIndex)
	Get a writable reference to a property by its index number, returned as an AbstractProperty. More...

bool	hasProperty (const std::string &name) const
	Return true if this Object has a property of any type with the given name, which must not be empty. More...

const AbstractProperty &	getPropertyByName (const std::string &name) const
	Get a const reference to a property by its name, returned as an AbstractProperty. More...

AbstractProperty &	updPropertyByName (const std::string &name)
	Get a writable reference to a property by its name, returned as an AbstractProperty. More...

template<class T >
bool	hasProperty () const
	Return true if this Object contains an unnamed, one-object property that contains objects of the given template type T. More...

template<class T >
const Property< T > &	getProperty (const PropertyIndex &index) const
	Get property of known type Property<T> as a const reference; the property must be present and have the right type. More...

template<class T >
const Property< T > &	getPropertyByName (const std::string &name) const
	Get property of known type Property<T> as a const reference; the property must be present and have the right type. More...

template<class T >
Property< T > &	updProperty (const PropertyIndex &index)
	Get property of known type Property<T> as a writable reference; the property must be present and have the right type. More...

template<class T >
Property< T > &	updPropertyByName (const std::string &name)
	Get property of known type Property<T> as a writable reference; the property must be present and have the right type. More...

bool	isObjectUpToDateWithProperties () const
	Returns `true` if no property's value has changed since the last time setObjectIsUpToDateWithProperties() was called. More...

void	readObjectFromXMLNodeOrFile (SimTK::Xml::Element &objectElement, int versionNumber)
	We're given an XML element from which we are to populate this Object. More...

virtual void	updateFromXMLNode (SimTK::Xml::Element &objectElement, int versionNumber)
	Use this method to deserialize an object from a SimTK::Xml::Element. More...

void	updateXMLNode (SimTK::Xml::Element &parent, const AbstractProperty *prop=nullptr) const
	Serialize this object into the XML node that represents it. More...

bool	getInlined () const
	Inlined means an in-memory Object that is not associated with an XMLDocument. More...

void	setInlined (bool aInlined, const std::string &aFileName="")
	Mark this as inlined or not and optionally provide a file name to associate with the new XMLDocument for the non-inline case. More...

std::string	getDocumentFileName () const
	If there is a document associated with this object then return the file name maintained by the document. More...

int	getDocumentFileVersion () const
	If there is a document associated with this object then return its version number. More...

void	setAllPropertiesUseDefault (bool aUseDefault)

bool	print (const std::string &fileName) const
	Write this Object into an XML file of the given name; conventionally the suffix to use is ".osim". More...

std::string	dump () const
	dump the XML representation of this Object into an std::string and return it. More...

virtual bool	isA (const char *type) const
	The default implementation returns true only if the supplied string is "Object"; each Object-derived class overrides this to match its own class name. More...

const std::string &	toString () const
	Wrapper to be used on Java side to display objects in tree; this returns just the object's name. More...

PropertySet &	getPropertySet ()
	OBSOLETE: Get a reference to the PropertySet maintained by the Object. More...

const PropertySet &	getPropertySet () const

Public Types
typedef MocoOutputExtremumGoal	Self
	This typedef might be useful within the member functions of this class. More...

typedef MocoOutputBase	Super
	Use this typedef to refer to the superclass of this class. More...

Public Types inherited from OpenSim::MocoOutputBase
typedef MocoOutputBase	Self
	This typedef might be useful within the member functions of this class. More...

typedef MocoGoal	Super
	Use this typedef to refer to the superclass of this class. More...

Public Types inherited from OpenSim::MocoGoal
enum	Mode { Mode::Cost, Mode::EndpointConstraint }

typedef MocoGoal	Self
	This typedef might be useful within the member functions of this class. More...

typedef Object	Super
	Use this typedef to refer to the superclass of this class. More...

Protected Member Functions
void	initializeOnModelImpl (const Model &) const override
	Perform any caching before the problem is solved. More...

void	calcIntegrandImpl (const IntegrandInput &state, double &integrand) const override

void	calcGoalImpl (const GoalInput &input, SimTK::Vector &values) const override
	You may need to realize the state to the stage required for your calculations. More...

bool	getSupportsEndpointConstraintImpl () const override

Mode	getDefaultModeImpl () const override

Protected Member Functions inherited from OpenSim::MocoOutputBase
void	initializeOnModelBase () const
	Get a reference to the Output at the specified Output path and store its data type. More...

double	calcOutputValue (const SimTK::State &) const
	Calculate the Output value for the provided SimTK::State. More...

double	setValueToExponent (double value) const
	Raise a value to the exponent set via 'setExponent()'. More...

const SimTK::Stage &	getDependsOnStage () const
	Get the "depends-on stage", or the SimTK::Stage we need to realize the system to in order to calculate the Output value. More...

void	printDescriptionImpl () const override
	Print a more detailed description unique to each goal. More...

Protected Member Functions inherited from OpenSim::MocoGoal
void	setRequirements (int numIntegrals, int numOutputs, SimTK::Stage stageDependency=SimTK::Stage::Acceleration) const
	Set the number of integral terms required by this goal and the length of the vector passed into calcGoalImpl(). More...

virtual void	calcIntegrandImpl (const IntegrandInput &input, SimTK::Real &integrand) const
	You may need to realize the state to the stage required for your calculations. More...

const Model &	getModel () const
	For use within virtual function implementations. More...

double	calcSystemDisplacement (const GoalInput &input) const
	Calculate the displacement of the system's center of mass over the phase. More...

double	calcDuration (const GoalInput &input) const
	Calculate the duration of the phase. More...

double	calcSystemMass (const GoalInput &input) const
	Calculate the mass of the system. More...

void	appendScaleFactor (const MocoScaleFactor &scaleFactor)
	Append a MocoScaleFactor to this MocoGoal. More...

Protected Member Functions inherited from OpenSim::Object
	Object ()
	The default constructor is only for use by constructors of derived types. More...

	Object (const std::string &fileName, bool aUpdateFromXMLNode=true)
	Constructor from a file, to be called from other constructors that take a file as input. More...

	Object (const Object &source)
	Copy constructor is invoked automatically by derived classes with default copy constructors; otherwise it must be invoked explicitly. More...

	Object (SimTK::Xml::Element &aElement)
	Construct the base class portion of an Object from a given Xml element that describes this Object. More...

template<class T >
PropertyIndex	addProperty (const std::string &name, const std::string &comment, const T &value)
	Define a new single-value property of known type T, with the given name, associated comment, and initial value. More...

template<class T >
PropertyIndex	addOptionalProperty (const std::string &name, const std::string &comment)
	Add an optional property, meaning it can contain either no value or a single value. More...

template<class T >
PropertyIndex	addOptionalProperty (const std::string &name, const std::string &comment, const T &value)
	Add an optional property, meaning it can contain either no value or a single value. More...

template<class T >
PropertyIndex	addListProperty (const std::string &name, const std::string &comment, int minSize, int maxSize)
	Define a new list-valued property of known type T, with the given name, associated comment, minimum (==0) and maximum (>0) allowable list lengths, and a zero-length initial value. More...

template<class T , template< class > class Container>
PropertyIndex	addListProperty (const std::string &name, const std::string &comment, int minSize, int maxSize, const Container< T > &valueList)
	Define a new list-valued property as above, but assigning an initial value via some templatized container class that supports size() and indexing. More...

PropertyIndex	getPropertyIndex (const std::string &name) const
	Look up a property by name and return its PropertyIndex if it is found. More...

template<class T >
PropertyIndex	getPropertyIndex () const
	Look up an unnamed property by the type of object it contains, and return its PropertyIndex if it is found. More...

template<class T >
void	checkPropertyValueIsPositive (const Property< T > &p) const
	Throw an exception if any of the property's values are not positive. More...

template<class T >
void	checkPropertyValueIsInSet (const Property< T > &p, const std::set< T > &set) const
	Throw an exception if any of the property's values are not in the provided set. More...

template<class T >
void	checkPropertyValueIsInRangeOrSet (const Property< T > &p, const T &lower, const T &upper, const std::set< T > &set) const
	Throw an exception if any of the property's values are neither in the provided range nor in the provided set. More...

void	setObjectIsUpToDateWithProperties ()
	When an object is initialized using the current values of its properties, it can set a flag indicating that it is up to date. More...

void	clearObjectIsUpToDateWithProperties ()
	For testing or debugging purposes, manually clear the "object is up to date with respect to properties" flag. More...

void	makeObjectNamesConsistentWithProperties ()
	Make sure the name of an object is consistent with its property type. More...

void	updateFromXMLDocument ()
	Use this method only if you're deserializing from a file and the object is at the top level; that is, primarily in constructors that take a file name as input. More...

void	setDocument (XMLDocument *doc)
	Unconditionally set the XMLDocument associated with this object. More...

const XMLDocument *	getDocument () const
	Get a const pointer to the document (if any) associated with this object. More...

XMLDocument *	updDocument ()
	Get a writable pointer to the document (if any) associated with this object. More...

Auto-generated functions
static MocoOutputExtremumGoal *	safeDownCast (OpenSim::Object *obj)
	For use in MATLAB and Python to access the concrete class. More...

static const std::string &	getClassName ()
	This returns "MocoOutputExtremumGoal". More...

void	assign (Object &aObject) override
	This allows copy assignment in the Java GUI. More...

MocoOutputExtremumGoal *	clone () const override
	Create a new heap-allocated copy of the concrete object to which this Object refers. More...

const std::string &	getConcreteClassName () const override
	Returns the class name of the concrete Object-derived class of the actual object referenced by this Object, as a string. More...

Additional Inherited Members
Static Public Member Functions inherited from OpenSim::MocoOutputBase
static MocoOutputBase *	safeDownCast (OpenSim::Object *obj)
	For use in MATLAB and Python to access the concrete class. More...

static const std::string &	getClassName ()
	This returns "MocoOutputBase". More...

Static Public Member Functions inherited from OpenSim::MocoGoal
static MocoGoal *	safeDownCast (OpenSim::Object *obj)
	For use in MATLAB and Python to access the concrete class. More...

static const std::string &	getClassName ()
	This returns "MocoGoal". More...

Static Public Member Functions inherited from OpenSim::Object
static void	registerType (const Object &defaultObject)
	Register an instance of a class; if the class is already registered it will be replaced. More...

static void	renameType (const std::string &oldTypeName, const std::string &newTypeName)
	Support versioning by associating the current Object type with an old name. More...

static const Object *	getDefaultInstanceOfType (const std::string &concreteClassName)
	Return a pointer to the default instance of the registered (concrete) Object whose class name is given, or NULL if the type is not registered. More...

template<class T >
static bool	isObjectTypeDerivedFrom (const std::string &concreteClassName)
	Return true if the given concrete object type represents a subclass of the template object type T, and thus could be referenced with a T*. More...

static Object *	newInstanceOfType (const std::string &concreteClassName)
	Create a new instance of the concrete Object type whose class name is given as concreteClassName. More...

static void	getRegisteredTypenames (Array< std::string > &typeNames)
	Retrieve all the typenames registered so far. More...

template<class T >
static void	getRegisteredObjectsOfGivenType (ArrayPtrs< T > &rArray)
	Return an array of pointers to the default instances of all registered (concrete) Object types that derive from a given Object-derived type that does not have to be concrete. More...

static bool	PrintPropertyInfo (std::ostream &os, const std::string &classNameDotPropertyName, bool printFlagInfo=true)
	Dump formatted property information to a given output stream, useful for creating a "help" facility for registered objects. More...

static bool	PrintPropertyInfo (std::ostream &os, const std::string &className, const std::string &propertyName, bool printFlagInfo=true)
	Same as the other signature but the class name and property name are provided as two separate strings. More...

static Object *	makeObjectFromFile (const std::string &fileName)
	Create an OpenSim object whose type is based on the tag at the root node of the XML file passed in. More...

static const std::string &	getClassName ()
	Return the name of this class as a string; i.e., "Object". More...

static void	setSerializeAllDefaults (bool shouldSerializeDefaults)
	Static function to control whether all registered objects and their properties are written to the defaults section of output files rather than only those values for which the default was explicitly overwritten when read in from an input file or set programmatically. More...

static bool	getSerializeAllDefaults ()
	Report the value of the "serialize all defaults" flag. More...

static bool	isKindOf (const char *type)
	Returns true if the passed-in string is "Object"; each Object-derived class defines a method of this name for its own class name. More...

static void	setDebugLevel (int newLevel)
	Set the amount of logging output. More...

static int	getDebugLevel ()
	Get the current setting of debug level. More...

static Object *	SafeCopy (const Object *aObject)
	Use the clone() method to duplicate the given object unless the pointer is null in which case null is returned. More...

static void	RegisterType (const Object &defaultObject)
	OBSOLETE alternate name for registerType(). More...

static void	RenameType (const std::string &oldName, const std::string &newName)
	OBSOLETE alternate name for renameType(). More...

Static Public Attributes inherited from OpenSim::Object
static const std::string	DEFAULT_NAME
	Name used for default objects when they are serialized. More...

Protected Attributes inherited from OpenSim::Object
PropertySet	_propertySet
	OBSOLETE: Property_Deprecated set for serializable member variables of this and derived classes. More...

Related Functions inherited from OpenSim::Object
#define	OpenSim_DECLARE_CONCRETE_OBJECT(ConcreteClass, SuperClass)
	Macro to be included as the first line of the class declaration for any non-templatized, concrete class that derives from OpenSim::Object. More...

#define	OpenSim_DECLARE_ABSTRACT_OBJECT(ConcreteClass, SuperClass)
	Macro to be included as the first line of the class declaration for any still-abstract class that derives from OpenSim::Object. More...

#define	OpenSim_DECLARE_CONCRETE_OBJECT_T(ConcreteClass, TArg, SuperClass)
	Macro to be included as the first line of the class declaration for any templatized, concrete class that derives from OpenSim::Object, like Set<T>. More...

#define	OpenSim_DECLARE_ABSTRACT_OBJECT_T(ConcreteClass, TArg, SuperClass)
	Macro to be included as the first line of the class declaration for any templatized, still-abstract class that derives from OpenSim::Object. More...

Detailed Description

This goal permits the integration of only positive or negative values from a model Output.

This goal allows you to use model Outputs of type double, or a single specified element from an Output of type SimTK::Vec3 or SimTK::SpatialVec in the integrand of a goal. You can also specify the exponent of the value in the integrand via 'setExponent()'.

This goal performs a smooth approximation of the common 'minimum' or 'maximum' extremum functions and then calculates the resulting integral. The goal is computed as follows:

\[ \frac{1}{dm} \int_{t_i}^{t_f} w_v \beta((\frac{1}{s} (\ln (1 + \exp (s \beta v))))^p) ~dt \]

We use the following notation:

\( d \): displacement of the system, if divide_by_displacement is true; 1 otherwise.
\( m \): mass of the system, if divide_by_mass is true; 1 otherwise.
\( v \): the output variable of choice.
\( w_v \): the weight for output variable \( v \).
\( \beta \): the approximate extremum to be taken ( \( \beta \) == -1 for minimum; \( \beta \) == 1 for maximum).
\( s \): the smoothing factor for approximating the extremum. With \( s \) == 1 the approximation is closer to the true extremum taken. For \( v \) with potentially large magnitudes (> 2000) during a simulation it is recommended to set this property as 0.2 to avoid Inf.
\( p \): the exponent.

Member Typedef Documentation

◆ Self

typedef MocoOutputExtremumGoal OpenSim::MocoOutputExtremumGoal::Self

This typedef might be useful within the member functions of this class.

This is generated by the OpenSim_DECLARE_*_OBJECT macros.

◆ Super

typedef MocoOutputBase OpenSim::MocoOutputExtremumGoal::Super

Use this typedef to refer to the superclass of this class.

Avoid using the explicit type name of the superclass; this would introduce bugs if the superclass is changed.

This is generated by the OpenSim_DECLARE_*_OBJECT macros.

Constructor & Destructor Documentation

◆ MocoOutputExtremumGoal() [1/3]

OpenSim::MocoOutputExtremumGoal::MocoOutputExtremumGoal ( )

inline

◆ MocoOutputExtremumGoal() [2/3]

OpenSim::MocoOutputExtremumGoal::MocoOutputExtremumGoal ( std::string name )

inline

◆ MocoOutputExtremumGoal() [3/3]

OpenSim::MocoOutputExtremumGoal::MocoOutputExtremumGoal	(	std::string	name,
		double	weight
	)

inline

Member Function Documentation

◆ assign()

void OpenSim::MocoOutputExtremumGoal::assign ( Object & aObject )

inlineoverride

This allows copy assignment in the Java GUI.

Exceptions

Exception if the argument is not of type MocoOutputExtremumGoal.

◆ calcGoalImpl()

void OpenSim::MocoOutputExtremumGoal::calcGoalImpl	(	const GoalInput &	input,
		SimTK::Vector &	goal
	)		const

overrideprotectedvirtual

You may need to realize the state to the stage required for your calculations.

Do NOT realize to a stage higher than the goal's stage dependency; doing so will cause an exception to be thrown. The Lagrange multipliers for kinematic constraints are not available.

Implements OpenSim::MocoGoal.

◆ calcIntegrandImpl()

void OpenSim::MocoOutputExtremumGoal::calcIntegrandImpl	(	const IntegrandInput &	state,
		double &	integrand
	)		const

overrideprotected

◆ clone()

MocoOutputExtremumGoal* OpenSim::MocoOutputExtremumGoal::clone ( ) const

inlineoverridevirtual

Create a new heap-allocated copy of the concrete object to which this Object refers.

It is up to the caller to delete the returned object when no longer needed. Every concrete object deriving from Object implements this pure virtual method automatically, via the declaration macro it invokes (e.g., OpenSim_DECLARE_CONCRETE_OBJECT()). Note that the concrete class overrides modify the return type to be a pointer to the concrete object; that still overrides the base class method because the return type is covariant with (that is, derives from) Object.

Implements OpenSim::MocoOutputBase.

◆ getClassName()

static const std::string& OpenSim::MocoOutputExtremumGoal::getClassName ( )

inlinestatic

This returns "MocoOutputExtremumGoal".

See getConcreteClassName() if you want the class name of the underlying concrete object instead.

This is generated by the OpenSim_DECLARE_*_OBJECT macros.

◆ getConcreteClassName()

const std::string& OpenSim::MocoOutputExtremumGoal::getConcreteClassName ( ) const

inlineoverridevirtual

Returns the class name of the concrete Object-derived class of the actual object referenced by this Object, as a string.

This is the string that is used as the tag for this concrete object in an XML file. Every concrete class derived from Object automatically overrides this method via the declaration macro it uses. See getClassName() to get the class name of the referencing (possibly abstract) class rather than the concrete object.

See also: getClassName()

Implements OpenSim::MocoOutputBase.

◆ getDefaultModeImpl()

Mode OpenSim::MocoOutputExtremumGoal::getDefaultModeImpl ( ) const

inlineoverrideprotectedvirtual

Reimplemented from OpenSim::MocoGoal.

◆ getExtremumType()

std::string OpenSim::MocoOutputExtremumGoal::getExtremumType ( ) const

inline

◆ getSmoothingFactor()

double OpenSim::MocoOutputExtremumGoal::getSmoothingFactor ( ) const

inline

◆ getSupportsEndpointConstraintImpl()

bool OpenSim::MocoOutputExtremumGoal::getSupportsEndpointConstraintImpl ( ) const

inlineoverrideprotectedvirtual

Reimplemented from OpenSim::MocoGoal.

◆ initializeOnModelImpl()

void OpenSim::MocoOutputExtremumGoal::initializeOnModelImpl ( const Model & ) const

overrideprotectedvirtual

Perform any caching before the problem is solved.

You must override this function and invoke setRequirements().

Precondition(s):: The model is initialized (initSystem()) and getModel() is available. The passed-in model is equivalent to getModel(). Use this opportunity to check for errors in user input.

Implements OpenSim::MocoGoal.

◆ safeDownCast()

static MocoOutputExtremumGoal* OpenSim::MocoOutputExtremumGoal::safeDownCast ( OpenSim::Object * obj )

inlinestatic

For use in MATLAB and Python to access the concrete class.

Example: cObj = MocoOutputExtremumGoal.safeDownCast(obj). This is equivalent to dynamic_cast<MocoOutputExtremumGoal*>(obj) in C++.

◆ setExtremumType()

void OpenSim::MocoOutputExtremumGoal::setExtremumType ( std::string extremum_type )

inline

Set the type of extremum ('minimum' or 'maximum') to be applied to the output variable of choice.

◆ setSmoothingFactor()

void OpenSim::MocoOutputExtremumGoal::setSmoothingFactor ( double smoothing_factor )

inline

Set the smoothing factor used for the extremum approximation (default = 1.0).

This property can be set between [0.2, 1.0]. For Outputs that may take on large values (> ~2000) during a simulation, it is recommended to set this property closer to 0.2.

OpenSim Property, Socket, Output, Input Documentation

◆ extremum_type

std::string OpenSim::MocoOutputExtremumGoal::extremum_type

"The type of extremum to be taken in the goal." "'minimum' or 'maximum'" "(Default extremum type = 'minimum')."

This property appears in XML files under the tag <extremum_type>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

See also: get_extremum_type(), upd_extremum_type(), set_extremum_type()

◆ smoothing_factor

double OpenSim::MocoOutputExtremumGoal::smoothing_factor

"The smoothing factor applied in the approximation of the " "extremum function (default = 1.0). This property can be set " "between [0.2, 1.0]. For Outputs that may take on large values " "(> ~2000) during a simulation, it is recommended to set this " "property closer to 0.2."

This property appears in XML files under the tag <smoothing_factor>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

See also: get_smoothing_factor(), upd_smoothing_factor(), set_smoothing_factor()

The documentation for this class was generated from the following file:

OpenSim/Moco/MocoGoal/MocoOutputGoal.h

OpenSim Properties, Sockets, Outputs, Inputs

Public Member Functions

Public Types

Protected Member Functions

Auto-generated functions

Additional Inherited Members

Detailed Description

Member Typedef Documentation

◆ Self

◆ Super

Constructor & Destructor Documentation

◆ MocoOutputExtremumGoal() [1/3]

◆ MocoOutputExtremumGoal() [2/3]

◆ MocoOutputExtremumGoal() [3/3]

Member Function Documentation

◆ assign()

◆ calcGoalImpl()

◆ calcIntegrandImpl()

◆ clone()

◆ getClassName()

◆ getConcreteClassName()

◆ getDefaultModeImpl()

◆ getExtremumType()

◆ getSmoothingFactor()

◆ getSupportsEndpointConstraintImpl()

◆ initializeOnModelImpl()

◆ safeDownCast()

◆ setExtremumType()

◆ setSmoothingFactor()

OpenSim Property, Socket, Output, Input Documentation

◆ extremum_type

◆ smoothing_factor