|
|
std::string | optim_jacobian_approximation |
| "When using IPOPT, 'finite-difference-values' for Jacobian " "calculations " "by the solver, or 'exact' for Jacobian calculations by " "tropter (default)." More...
|
|
std::string | optim_sparsity_detection |
| "Trajectory used to detect sparsity pattern of Jacobian/Hessian; " "'random' (default) or 'initial-guess'" More...
|
|
|
std::string | exact_hessian_block_sparsity_mode |
| "'dense' for dense blocks on the Hessian diagonal, or " "'sparse' for sparse blocks on the Hessian diagonal, detected from " "the " "optimal control problem. If using an 'exact' Hessian " "approximation, this " "property must be set. Note: this option only takes effect when " "using " "IPOPT." More...
|
|
int | num_mesh_intervals |
| "The number of uniformly-sized mesh intervals for the problem " "(default: 100). If a non-uniform mesh exists, the non-uniform " "mesh is used instead." More...
|
|
int | verbosity |
| "0 for silent. 1 for only Moco's own output. " "2 for output from CasADi and the underlying solver (default: 2)." More...
|
|
std::string | transcription_scheme |
| "'trapezoidal' for trapezoidal transcription, or 'hermite-simpson' " "(default) for separated Hermite-Simpson transcription." More...
|
|
bool | interpolate_control_midpoints |
| "If the transcription scheme is set to 'hermite-simpson', then " "enable this property to constrain the control values at mesh " "interval midpoints to be linearly interpolated from the control " "values at the mesh interval endpoints. Default: true." More...
|
|
std::string | multibody_dynamics_mode |
| "Multibody dynamics are expressed as 'explicit' (default) or " "'implicit' differential equations." More...
|
|
std::string | optim_solver |
| "The optimization solver to use (default: ipopt)." More...
|
|
int | optim_max_iterations |
| "Maximum number of iterations in the optimization solver " "(-1 for solver's default)." More...
|
|
double | optim_convergence_tolerance |
| "Tolerance used to determine if the objective is minimized " "(-1 for solver's default)" More...
|
|
double | optim_constraint_tolerance |
| "Tolerance used to determine if the constraints are satisfied " "(-1 for solver's default)" More...
|
|
std::string | optim_hessian_approximation |
| "When using IPOPT, 'limited-memory' (default) for quasi-Newton, or " "'exact' for full " "Newton." More...
|
|
int | optim_ipopt_print_level |
| "IPOPT's verbosity (see IPOPT documentation)." More...
|
|
bool | minimize_lagrange_multipliers |
| "If enabled, a term minimizing the weighted, squared sum of " "any existing Lagrange multipliers is added to the optimal control " "problem. This may be useful for imposing uniqueness in the " "Lagrange multipliers when not enforcing model kinematic " "constraint derivatives or when the constraint Jacobian is " "singular. To set the weight for this term use the " "'lagrange_multiplier_weight' property. Default: false" More...
|
|
double | lagrange_multiplier_weight |
| "If the 'minimize_lagrange_multipliers' property is enabled, this " "defines the weight for the cost term added to the optimal control " "problem. Default: 1" More...
|
|
MocoBounds | velocity_correction_bounds |
| "For problems where model kinematic constraint derivatives are " "enforced, set the bounds on the slack variables performing the " "velocity correction to project the model coordinates back onto " "the constraint manifold. Default: [-0.1, 0.1]" More...
|
|
MocoBounds | implicit_multibody_acceleration_bounds |
| "Bounds on acceleration variables in implicit dynamics mode. " "Default: [-1000, 1000]" More...
|
|
MocoBounds | implicit_auxiliary_derivative_bounds |
| "Bounds on derivative variables for components with auxiliary " "dynamics in implicit form. Default: [-1000, 1000]" More...
|
|
std::string | guess_file |
| "A MocoTrajectory file storing an initial guess." More...
|
|
bool | enforce_constraint_derivatives |
| "'true' (default) or 'false', whether or not derivatives of " "kinematic constraints are enforced as path constraints in the " "optimal control problem." More...
|
|
double | mesh |
| "Usually non-uniform, user-defined list of mesh points to sample. " "Takes precedence over uniform mesh with num_mesh_intervals." More...
|
|
|
| MocoTropterSolver () |
|
|
const std::string & | get_optim_jacobian_approximation () const |
| Get the value of the optim_jacobian_approximation property. More...
|
|
std::string & | upd_optim_jacobian_approximation () |
| Get a writable reference to the optim_jacobian_approximation property. More...
|
|
void | set_optim_jacobian_approximation (const std::string &value) |
| Set the value of the optim_jacobian_approximation property. More...
|
|
const std::string & | get_optim_sparsity_detection () const |
| Get the value of the optim_sparsity_detection property. More...
|
|
std::string & | upd_optim_sparsity_detection () |
| Get a writable reference to the optim_sparsity_detection property. More...
|
|
void | set_optim_sparsity_detection (const std::string &value) |
| Set the value of the optim_sparsity_detection property. More...
|
|
const std::string & | get_exact_hessian_block_sparsity_mode () const |
| Get the value of the exact_hessian_block_sparsity_mode property. More...
|
|
std::string & | upd_exact_hessian_block_sparsity_mode () |
| Get a writable reference to the exact_hessian_block_sparsity_mode property. More...
|
|
void | set_exact_hessian_block_sparsity_mode (const std::string &value) |
| Set the value of the exact_hessian_block_sparsity_mode property. More...
|
|
|
MocoTrajectory | createGuess (const std::string &type="bounds") const |
| Create a guess that you can edit and then set using setGuess(). More...
|
|
void | setGuess (MocoTrajectory guess) |
| The number of time points in the trajectory does not need to match num_mesh_intervals ; the trajectory will be interpolated to the correct size. More...
|
|
void | setGuess (const std::string &type) |
| Use this convenience function if you want to choose the type of guess used, but do not want to modify it first. More...
|
|
void | setGuessFile (const std::string &file) |
| This clears any previously-set guess, if any. More...
|
|
void | clearGuess () |
| Clear the stored guess and the guess_file if any. More...
|
|
const MocoTrajectory & | getGuess () const |
| Access the guess, loading it from the guess_file if necessary. More...
|
|
| MocoDirectCollocationSolver () |
|
void | setMesh (const std::vector< double > &mesh) |
| Set the mesh to a user-defined list of mesh points to sample. More...
|
|
void | assign (Object &aObject) override |
| This allows copy assignment in the Java GUI. More...
|
|
const int & | get_num_mesh_intervals () const |
| Get the value of the num_mesh_intervals property. More...
|
|
int & | upd_num_mesh_intervals () |
| Get a writable reference to the num_mesh_intervals property. More...
|
|
void | set_num_mesh_intervals (const int &value) |
| Set the value of the num_mesh_intervals property. More...
|
|
const int & | get_verbosity () const |
| Get the value of the verbosity property. More...
|
|
int & | upd_verbosity () |
| Get a writable reference to the verbosity property. More...
|
|
void | set_verbosity (const int &value) |
| Set the value of the verbosity property. More...
|
|
const std::string & | get_transcription_scheme () const |
| Get the value of the transcription_scheme property. More...
|
|
std::string & | upd_transcription_scheme () |
| Get a writable reference to the transcription_scheme property. More...
|
|
void | set_transcription_scheme (const std::string &value) |
| Set the value of the transcription_scheme property. More...
|
|
const bool & | get_interpolate_control_midpoints () const |
| Get the value of the interpolate_control_midpoints property. More...
|
|
bool & | upd_interpolate_control_midpoints () |
| Get a writable reference to the interpolate_control_midpoints property. More...
|
|
void | set_interpolate_control_midpoints (const bool &value) |
| Set the value of the interpolate_control_midpoints property. More...
|
|
const std::string & | get_multibody_dynamics_mode () const |
| Get the value of the multibody_dynamics_mode property. More...
|
|
std::string & | upd_multibody_dynamics_mode () |
| Get a writable reference to the multibody_dynamics_mode property. More...
|
|
void | set_multibody_dynamics_mode (const std::string &value) |
| Set the value of the multibody_dynamics_mode property. More...
|
|
const std::string & | get_optim_solver () const |
| Get the value of the optim_solver property. More...
|
|
std::string & | upd_optim_solver () |
| Get a writable reference to the optim_solver property. More...
|
|
void | set_optim_solver (const std::string &value) |
| Set the value of the optim_solver property. More...
|
|
const int & | get_optim_max_iterations () const |
| Get the value of the optim_max_iterations property. More...
|
|
int & | upd_optim_max_iterations () |
| Get a writable reference to the optim_max_iterations property. More...
|
|
void | set_optim_max_iterations (const int &value) |
| Set the value of the optim_max_iterations property. More...
|
|
const double & | get_optim_convergence_tolerance () const |
| Get the value of the optim_convergence_tolerance property. More...
|
|
double & | upd_optim_convergence_tolerance () |
| Get a writable reference to the optim_convergence_tolerance property. More...
|
|
void | set_optim_convergence_tolerance (const double &value) |
| Set the value of the optim_convergence_tolerance property. More...
|
|
const double & | get_optim_constraint_tolerance () const |
| Get the value of the optim_constraint_tolerance property. More...
|
|
double & | upd_optim_constraint_tolerance () |
| Get a writable reference to the optim_constraint_tolerance property. More...
|
|
void | set_optim_constraint_tolerance (const double &value) |
| Set the value of the optim_constraint_tolerance property. More...
|
|
const std::string & | get_optim_hessian_approximation () const |
| Get the value of the optim_hessian_approximation property. More...
|
|
std::string & | upd_optim_hessian_approximation () |
| Get a writable reference to the optim_hessian_approximation property. More...
|
|
void | set_optim_hessian_approximation (const std::string &value) |
| Set the value of the optim_hessian_approximation property. More...
|
|
const int & | get_optim_ipopt_print_level () const |
| Get the value of the optim_ipopt_print_level property. More...
|
|
int & | upd_optim_ipopt_print_level () |
| Get a writable reference to the optim_ipopt_print_level property. More...
|
|
void | set_optim_ipopt_print_level (const int &value) |
| Set the value of the optim_ipopt_print_level property. More...
|
|
const bool & | get_enforce_constraint_derivatives () const |
| Get the value of the enforce_constraint_derivatives property. More...
|
|
bool & | upd_enforce_constraint_derivatives () |
| Get a writable reference to the enforce_constraint_derivatives property. More...
|
|
void | set_enforce_constraint_derivatives (const bool &value) |
| Set the value of the enforce_constraint_derivatives property. More...
|
|
const bool & | get_minimize_lagrange_multipliers () const |
| Get the value of the minimize_lagrange_multipliers property. More...
|
|
bool & | upd_minimize_lagrange_multipliers () |
| Get a writable reference to the minimize_lagrange_multipliers property. More...
|
|
void | set_minimize_lagrange_multipliers (const bool &value) |
| Set the value of the minimize_lagrange_multipliers property. More...
|
|
const double & | get_lagrange_multiplier_weight () const |
| Get the value of the lagrange_multiplier_weight property. More...
|
|
double & | upd_lagrange_multiplier_weight () |
| Get a writable reference to the lagrange_multiplier_weight property. More...
|
|
void | set_lagrange_multiplier_weight (const double &value) |
| Set the value of the lagrange_multiplier_weight property. More...
|
|
const MocoBounds & | get_velocity_correction_bounds () const |
| Get the value of the velocity_correction_bounds property. More...
|
|
MocoBounds & | upd_velocity_correction_bounds () |
| Get a writable reference to the velocity_correction_bounds property. More...
|
|
void | set_velocity_correction_bounds (const MocoBounds &value) |
| Set the value of the velocity_correction_bounds property. More...
|
|
const MocoBounds & | get_implicit_multibody_acceleration_bounds () const |
| Get the value of the implicit_multibody_acceleration_bounds property. More...
|
|
MocoBounds & | upd_implicit_multibody_acceleration_bounds () |
| Get a writable reference to the implicit_multibody_acceleration_bounds property. More...
|
|
void | set_implicit_multibody_acceleration_bounds (const MocoBounds &value) |
| Set the value of the implicit_multibody_acceleration_bounds property. More...
|
|
const MocoBounds & | get_implicit_auxiliary_derivative_bounds () const |
| Get the value of the implicit_auxiliary_derivative_bounds property. More...
|
|
MocoBounds & | upd_implicit_auxiliary_derivative_bounds () |
| Get a writable reference to the implicit_auxiliary_derivative_bounds property. More...
|
|
void | set_implicit_auxiliary_derivative_bounds (const MocoBounds &value) |
| Set the value of the implicit_auxiliary_derivative_bounds property. More...
|
|
| MocoSolver ()=default |
|
| MocoSolver (const MocoProblem &problem) |
| This calls resetProblem() with the provided problem. More...
|
|
virtual | ~MocoSolver ()=default |
|
void | resetProblem (const MocoProblem &problem) const |
| Call this to prepare the solver for use on the provided problem. More...
|
|
MocoTrajectory | createGuessTimeStepping () const |
| (Experimental) Run a forward simulation (using the OpenSim Manager, which uses a SimTK::Integrator), using the default controls for actuators and the default states as the initial states, to create a guess that is dynamically consistent (constraint errors should be small). More...
|
|
void | assign (Object &aObject) override |
| This allows copy assignment in the Java GUI. More...
|
|
virtual | ~Object () |
| Virtual destructor for cleanup. More...
|
|
bool | isEqualTo (const Object &aObject) const |
| Equality operator wrapper for use from languages not supporting operator overloading. More...
|
|
Object & | operator= (const Object &aObject) |
| Copy assignment copies he base class fields, including the properties. More...
|
|
virtual bool | operator== (const Object &aObject) const |
| Determine if two objects are equal. More...
|
|
virtual bool | operator< (const Object &aObject) const |
| Provide an ordering for objects so they can be put in sorted containers. More...
|
|
void | setName (const std::string &name) |
| Set the name of the Object. More...
|
|
const std::string & | getName () const |
| Get the name of this Object. More...
|
|
void | setDescription (const std::string &description) |
| Set description, a one-liner summary. More...
|
|
const std::string & | getDescription () const |
| Get description, a one-liner summary. More...
|
|
const std::string & | getAuthors () const |
| Get Authors of this Object. More...
|
|
void | setAuthors (const std::string &authors) |
| Set Authors of this object. More...
|
|
const std::string & | getReferences () const |
| Get references or publications to cite if using this object. More...
|
|
void | setReferences (const std::string &references) |
| Set references or publications to cite if using this object. More...
|
|
int | getNumProperties () const |
| Determine how many properties are stored with this Object. More...
|
|
const AbstractProperty & | getPropertyByIndex (int propertyIndex) const |
| Get a const reference to a property by its index number, returned as an AbstractProperty. More...
|
|
AbstractProperty & | updPropertyByIndex (int propertyIndex) |
| Get a writable reference to a property by its index number, returned as an AbstractProperty. More...
|
|
bool | hasProperty (const std::string &name) const |
| Return true if this Object has a property of any type with the given name, which must not be empty. More...
|
|
const AbstractProperty & | getPropertyByName (const std::string &name) const |
| Get a const reference to a property by its name, returned as an AbstractProperty. More...
|
|
AbstractProperty & | updPropertyByName (const std::string &name) |
| Get a writable reference to a property by its name, returned as an AbstractProperty. More...
|
|
template<class T > |
bool | hasProperty () const |
| Return true if this Object contains an unnamed, one-object property that contains objects of the given template type T. More...
|
|
template<class T > |
const Property< T > & | getProperty (const PropertyIndex &index) const |
| Get property of known type Property<T> as a const reference; the property must be present and have the right type. More...
|
|
template<class T > |
const Property< T > & | getPropertyByName (const std::string &name) const |
| Get property of known type Property<T> as a const reference; the property must be present and have the right type. More...
|
|
template<class T > |
Property< T > & | updProperty (const PropertyIndex &index) |
| Get property of known type Property<T> as a writable reference; the property must be present and have the right type. More...
|
|
template<class T > |
Property< T > & | updPropertyByName (const std::string &name) |
| Get property of known type Property<T> as a writable reference; the property must be present and have the right type.
More...
|
|
bool | isObjectUpToDateWithProperties () const |
| Returns true if no property's value has changed since the last time setObjectIsUpToDateWithProperties() was called. More...
|
|
void | readObjectFromXMLNodeOrFile (SimTK::Xml::Element &objectElement, int versionNumber) |
| We're given an XML element from which we are to populate this Object. More...
|
|
virtual void | updateFromXMLNode (SimTK::Xml::Element &objectElement, int versionNumber) |
| Use this method to deserialize an object from a SimTK::Xml::Element. More...
|
|
void | updateXMLNode (SimTK::Xml::Element &parent, const AbstractProperty *prop=nullptr) const |
| Serialize this object into the XML node that represents it. More...
|
|
bool | getInlined () const |
| Inlined means an in-memory Object that is not associated with an XMLDocument. More...
|
|
void | setInlined (bool aInlined, const std::string &aFileName="") |
| Mark this as inlined or not and optionally provide a file name to associate with the new XMLDocument for the non-inline case. More...
|
|
std::string | getDocumentFileName () const |
| If there is a document associated with this object then return the file name maintained by the document. More...
|
|
int | getDocumentFileVersion () const |
| If there is a document associated with this object then return its version number. More...
|
|
void | setAllPropertiesUseDefault (bool aUseDefault) |
|
bool | print (const std::string &fileName) const |
| Write this Object into an XML file of the given name; conventionally the suffix to use is ".osim". More...
|
|
std::string | dump () const |
| dump the XML representation of this Object into an std::string and return it. More...
|
|
virtual bool | isA (const char *type) const |
| The default implementation returns true only if the supplied string is "Object"; each Object-derived class overrides this to match its own class name. More...
|
|
const std::string & | toString () const |
| Wrapper to be used on Java side to display objects in tree; this returns just the object's name. More...
|
|
PropertySet & | getPropertySet () |
| OBSOLETE: Get a reference to the PropertySet maintained by the Object. More...
|
|
const PropertySet & | getPropertySet () const |
|
|
static bool | isAvailable () |
| Returns true if Moco was compiled with the Tropter library; returns false otherwise. More...
|
|
static void | printOptimizationSolverOptions (std::string solver="ipopt") |
| Print the available options for the underlying optimization solver. More...
|
|
static MocoDirectCollocationSolver * | safeDownCast (OpenSim::Object *obj) |
| For use in MATLAB and Python to access the concrete class. More...
|
|
static const std::string & | getClassName () |
| This returns "MocoDirectCollocationSolver". More...
|
|
static MocoSolver * | safeDownCast (OpenSim::Object *obj) |
| For use in MATLAB and Python to access the concrete class. More...
|
|
static const std::string & | getClassName () |
| This returns "MocoSolver". More...
|
|
static void | registerType (const Object &defaultObject) |
| Register an instance of a class; if the class is already registered it will be replaced. More...
|
|
static void | renameType (const std::string &oldTypeName, const std::string &newTypeName) |
| Support versioning by associating the current Object type with an old name. More...
|
|
static const Object * | getDefaultInstanceOfType (const std::string &concreteClassName) |
| Return a pointer to the default instance of the registered (concrete) Object whose class name is given, or NULL if the type is not registered. More...
|
|
template<class T > |
static bool | isObjectTypeDerivedFrom (const std::string &concreteClassName) |
| Return true if the given concrete object type represents a subclass of the template object type T, and thus could be referenced with a T*. More...
|
|
static Object * | newInstanceOfType (const std::string &concreteClassName) |
| Create a new instance of the concrete Object type whose class name is given as concreteClassName. More...
|
|
static void | getRegisteredTypenames (Array< std::string > &typeNames) |
| Retrieve all the typenames registered so far. More...
|
|
template<class T > |
static void | getRegisteredObjectsOfGivenType (ArrayPtrs< T > &rArray) |
| Return an array of pointers to the default instances of all registered (concrete) Object types that derive from a given Object-derived type that does not have to be concrete. More...
|
|
static bool | PrintPropertyInfo (std::ostream &os, const std::string &classNameDotPropertyName, bool printFlagInfo=true) |
| Dump formatted property information to a given output stream, useful for creating a "help" facility for registered objects. More...
|
|
static bool | PrintPropertyInfo (std::ostream &os, const std::string &className, const std::string &propertyName, bool printFlagInfo=true) |
| Same as the other signature but the class name and property name are provided as two separate strings. More...
|
|
static Object * | makeObjectFromFile (const std::string &fileName) |
| Create an OpenSim object whose type is based on the tag at the root node of the XML file passed in. More...
|
|
static const std::string & | getClassName () |
| Return the name of this class as a string; i.e., "Object". More...
|
|
static void | setSerializeAllDefaults (bool shouldSerializeDefaults) |
| Static function to control whether all registered objects and their properties are written to the defaults section of output files rather than only those values for which the default was explicitly overwritten when read in from an input file or set programmatically. More...
|
|
static bool | getSerializeAllDefaults () |
| Report the value of the "serialize all defaults" flag. More...
|
|
static bool | isKindOf (const char *type) |
| Returns true if the passed-in string is "Object"; each Object-derived class defines a method of this name for its own class name. More...
|
|
static void | setDebugLevel (int newLevel) |
| Set the amount of logging output. More...
|
|
static int | getDebugLevel () |
| Get the current setting of debug level. More...
|
|
static Object * | SafeCopy (const Object *aObject) |
| Use the clone() method to duplicate the given object unless the pointer is null in which case null is returned. More...
|
|
static void | RegisterType (const Object &defaultObject) |
| OBSOLETE alternate name for registerType(). More...
|
|
static void | RenameType (const std::string &oldName, const std::string &newName) |
| OBSOLETE alternate name for renameType(). More...
|
|
|
std::shared_ptr< const TropterProblemBase< double > > | createTropterProblem () const |
|
std::unique_ptr< tropter::DirectCollocationSolver< double > > | createTropterSolver (std::shared_ptr< const TropterProblemBase< double >> ocp) const |
|
MocoSolution | solveImpl () const override |
| This is the meat of a solver: solve the problem and return the solution. More...
|
|
void | checkGuess (const MocoTrajectory &guess) const |
| Check that the provided guess is compatible with the problem and this solver. More...
|
|
void | constructProperties () |
|
void | checkConstraintJacobianRank (const MocoSolution &mocoSolution) const |
|
const std::string & | get_guess_file () const |
| Get the value of the guess_file property. More...
|
|
std::string & | upd_guess_file () |
| Get a writable reference to the guess_file property. More...
|
|
void | set_guess_file (const std::string &value) |
| Set the value of the guess_file property. More...
|
|
const double & | get_mesh (int i) const |
| Get the value of the i-th element of the mesh property. More...
|
|
double & | upd_mesh (int i) |
| Get a writable reference to the i-th element of the mesh property. More...
|
|
void | set_mesh (int i, const double &value) |
| Set the value of the i-th element of mesh property. More...
|
|
int | append_mesh (const double &value) |
| Append an element to the mesh property. More...
|
|
const MocoProblemRep & | getProblemRep () const |
|
std::unique_ptr< ThreadsafeJar< const MocoProblemRep > > | createProblemRepJar (int size) const |
| Create a library of MocoProblemReps for use in parallelized code. More...
|
|
| Object () |
| The default constructor is only for use by constructors of derived types. More...
|
|
| Object (const std::string &fileName, bool aUpdateFromXMLNode=true) |
| Constructor from a file, to be called from other constructors that take a file as input. More...
|
|
| Object (const Object &source) |
| Copy constructor is invoked automatically by derived classes with default copy constructors; otherwise it must be invoked explicitly. More...
|
|
| Object (SimTK::Xml::Element &aElement) |
| Construct the base class portion of an Object from a given Xml element that describes this Object. More...
|
|
template<class T > |
PropertyIndex | addProperty (const std::string &name, const std::string &comment, const T &value) |
| Define a new single-value property of known type T, with the given name, associated comment, and initial value. More...
|
|
template<class T > |
PropertyIndex | addOptionalProperty (const std::string &name, const std::string &comment) |
| Add an optional property, meaning it can contain either no value or a single value. More...
|
|
template<class T > |
PropertyIndex | addOptionalProperty (const std::string &name, const std::string &comment, const T &value) |
| Add an optional property, meaning it can contain either no value or a single value. More...
|
|
template<class T > |
PropertyIndex | addListProperty (const std::string &name, const std::string &comment, int minSize, int maxSize) |
| Define a new list-valued property of known type T, with the given name, associated comment, minimum (==0) and maximum (>0) allowable list lengths, and a zero-length initial value. More...
|
|
template<class T , template< class > class Container> |
PropertyIndex | addListProperty (const std::string &name, const std::string &comment, int minSize, int maxSize, const Container< T > &valueList) |
| Define a new list-valued property as above, but assigning an initial value via some templatized container class that supports size() and indexing. More...
|
|
PropertyIndex | getPropertyIndex (const std::string &name) const |
| Look up a property by name and return its PropertyIndex if it is found. More...
|
|
template<class T > |
PropertyIndex | getPropertyIndex () const |
| Look up an unnamed property by the type of object it contains, and return its PropertyIndex if it is found. More...
|
|
template<class T > |
void | checkPropertyValueIsPositive (const Property< T > &p) const |
| Throw an exception if any of the property's values are not positive. More...
|
|
template<class T > |
void | checkPropertyValueIsInSet (const Property< T > &p, const std::set< T > &set) const |
| Throw an exception if any of the property's values are not in the provided set. More...
|
|
template<class T > |
void | checkPropertyValueIsInRangeOrSet (const Property< T > &p, const T &lower, const T &upper, const std::set< T > &set) const |
| Throw an exception if any of the property's values are neither in the provided range nor in the provided set. More...
|
|
void | setObjectIsUpToDateWithProperties () |
| When an object is initialized using the current values of its properties, it can set a flag indicating that it is up to date. More...
|
|
void | clearObjectIsUpToDateWithProperties () |
| For testing or debugging purposes, manually clear the "object is up to
date with respect to properties" flag. More...
|
|
void | makeObjectNamesConsistentWithProperties () |
| Make sure the name of an object is consistent with its property type. More...
|
|
void | updateFromXMLDocument () |
| Use this method only if you're deserializing from a file and the object is at the top level; that is, primarily in constructors that take a file name as input. More...
|
|
void | setDocument (XMLDocument *) |
| Unconditionally set the XMLDocument associated with this object. More...
|
|
const XMLDocument * | getDocument () const |
| Get a const pointer to the document (if any) associated with this object. More...
|
|
XMLDocument * | updDocument () |
| Get a writable pointer to the document (if any) associated with this object. More...
|
|
Solve the MocoProblem using the tropter direct collocation library.
tropter** is a free and open-source C++ library that supports computing the Jacobian and Hessian via either automatic differentiation or finite differences, and uses IPOPT for solving the nonlinear optimization problem.
This class allows you to configure tropter's settings.
Supported optimization solvers
The following optimization solvers can be specified for the optim_solver property:
Using this solver in C++ requires that a tropter shared library is available, but tropter header files are not required. No tropter symbols are exposed in Moco's interface.