OpenSim::Millard2012AccelerationMuscle Class Reference

This class implements a 3 state (activation,fiber length and fiber velocity) acceleration musculo-tendon model that has several advantages over equilibrium musculo-tendon models: it is possible to simulate 0 activation, it requires fewer integrator steps to simulate, and physiological active force-length (with a minimum value of 0) and force velocity (with true asymptotes at the maximum shortening and lengthening velocities) curves can be employed. More...

Inheritance diagram for OpenSim::Millard2012AccelerationMuscle:

OpenSim Properties, Sockets, Outputs, Inputs
Properties (single-value)
double	default_activation
	"assumed initial activation level if none is assigned." More...
double	default_fiber_length
	"assumed initial fiber length if none is assigned." More...
double	default_fiber_velocity
	"assumed initial fiber velocity if none is assigned." More...
double	fiber_damping
	"fiber damping coefficient" More...
double	fiber_force_length_damping
	"fiber force length damping coefficient" More...
double	fiber_compressive_force_length_damping
	"fiber compressive force length damping coefficient" More...
double	fiber_compressive_force_cos_pennation_damping
	"fiber compressive force cos(pennationAngle) damping coefficient" More...
double	tendon_force_length_damping
	"tendon force length damping coefficient" More...
double	mass
	"lumped mass" More...
Properties (unnamed)
MuscleFirstOrderActivationDynamicModel	MuscleFirstOrderActivationDynamicModel
	"activation dynamics model with a lower bound" More...
ActiveForceLengthCurve	ActiveForceLengthCurve
	"active force length curve" More...
ForceVelocityCurve	ForceVelocityCurve
	"force velocity curve" More...
FiberForceLengthCurve	FiberForceLengthCurve
	"fiber force length curve" More...
TendonForceLengthCurve	TendonForceLengthCurve
	"Tendon force length curve" More...
FiberCompressiveForceLengthCurve	FiberCompressiveForceLengthCurve
	"fiber compressive force length curve" More...
FiberCompressiveForceCosPennationCurve	FiberCompressiveForceCosPennationCurve
	"fiber compressive force cos(pennationAngle) curve" More...
OpenSim Properties, Sockets, Outputs, Inputs inherited from OpenSim::Muscle
double	max_isometric_force
	"Maximum isometric force that the fibers can generate" More...
double	optimal_fiber_length
	"Optimal length of the muscle fibers" More...
double	tendon_slack_length
	"Resting length of the tendon" More...
double	pennation_angle_at_optimal
	"Angle between tendon and fibers at optimal fiber length expressed in radians" More...
double	max_contraction_velocity
	"Maximum contraction velocity of the fibers, in optimal fiberlengths/second" More...
bool	ignore_tendon_compliance
	"Compute muscle dynamics ignoring tendon compliance. Tendon is assumed to be rigid." More...
bool	ignore_activation_dynamics
	"Compute muscle dynamics ignoring activation dynamics. Activation is equivalent to excitation." More...
double	excitation
	Provides the value of getExcitation() and is available at stage SimTK::Stage::Dynamics . More...
double	activation
	Provides the value of getActivation() and is available at stage SimTK::Stage::Dynamics . More...
double	fiber_length
	Provides the value of getFiberLength() and is available at stage SimTK::Stage::Position . More...
double	pennation_angle
	Provides the value of getPennationAngle() and is available at stage SimTK::Stage::Position . More...
double	cos_pennation_angle
	Provides the value of getCosPennationAngle() and is available at stage SimTK::Stage::Position . More...
double	tendon_length
	Provides the value of getTendonLength() and is available at stage SimTK::Stage::Position . More...
double	normalized_fiber_length
	Provides the value of getNormalizedFiberLength() and is available at stage SimTK::Stage::Position . More...
double	fiber_length_along_tendon
	Provides the value of getFiberLengthAlongTendon() and is available at stage SimTK::Stage::Position . More...
double	tendon_strain
	Provides the value of getTendonStrain() and is available at stage SimTK::Stage::Position . More...
double	passive_force_multiplier
	Provides the value of getPassiveForceMultiplier() and is available at stage SimTK::Stage::Position . More...
double	active_force_length_multiplier
	Provides the value of getActiveForceLengthMultiplier() and is available at stage SimTK::Stage::Position . More...
double	fiber_velocity
	Provides the value of getFiberVelocity() and is available at stage SimTK::Stage::Velocity . More...
double	normalized_fiber_velocity
	Provides the value of getNormalizedFiberVelocity() and is available at stage SimTK::Stage::Velocity . More...
double	fiber_velocity_along_tendon
	Provides the value of getFiberVelocityAlongTendon() and is available at stage SimTK::Stage::Velocity . More...
double	tendon_velocity
	Provides the value of getTendonVelocity() and is available at stage SimTK::Stage::Velocity . More...
double	force_velocity_multiplier
	Provides the value of getForceVelocityMultiplier() and is available at stage SimTK::Stage::Velocity . More...
double	pennation_angular_velocity
	Provides the value of getPennationAngularVelocity() and is available at stage SimTK::Stage::Velocity . More...
double	fiber_force
	Provides the value of getFiberForce() and is available at stage SimTK::Stage::Dynamics . More...
double	fiber_force_along_tendon
	Provides the value of getFiberForceAlongTendon() and is available at stage SimTK::Stage::Dynamics . More...
double	active_fiber_force
	Provides the value of getActiveFiberForce() and is available at stage SimTK::Stage::Dynamics . More...
double	passive_fiber_force
	Provides the value of getPassiveFiberForce() and is available at stage SimTK::Stage::Dynamics . More...
double	active_fiber_force_along_tendon
	Provides the value of getActiveFiberForceAlongTendon() and is available at stage SimTK::Stage::Dynamics . More...
double	passive_fiber_force_along_tendon
	Provides the value of getPassiveFiberForceAlongTendon() and is available at stage SimTK::Stage::Dynamics . More...
double	tendon_force
	Provides the value of getTendonForce() and is available at stage SimTK::Stage::Dynamics . More...
double	fiber_stiffness
	Provides the value of getFiberStiffness() and is available at stage SimTK::Stage::Dynamics . More...
double	fiber_stiffness_along_tendon
	Provides the value of getFiberStiffnessAlongTendon() and is available at stage SimTK::Stage::Dynamics . More...
double	tendon_stiffness
	Provides the value of getTendonStiffness() and is available at stage SimTK::Stage::Dynamics . More...
double	muscle_stiffness
	Provides the value of getMuscleStiffness() and is available at stage SimTK::Stage::Dynamics . More...
double	fiber_active_power
	Provides the value of getFiberActivePower() and is available at stage SimTK::Stage::Dynamics . More...
double	fiber_passive_power
	Provides the value of getFiberPassivePower() and is available at stage SimTK::Stage::Dynamics . More...
double	tendon_power
	Provides the value of getTendonPower() and is available at stage SimTK::Stage::Dynamics . More...
double	muscle_power
	Provides the value of getMusclePower() and is available at stage SimTK::Stage::Dynamics . More...
OpenSim Properties, Sockets, Outputs, Inputs inherited from OpenSim::PathActuator
AbstractGeometryPath	path
	"The path of the actuator which defines length and lengthening speed." More...
double	optimal_force
	"The maximum force this actuator can produce." More...
double	tension
	Provides the value of computeActuation() and is available at stage SimTK::Stage::Acceleration . More...
OpenSim Properties, Sockets, Outputs, Inputs inherited from OpenSim::ScalarActuator
double	min_control
	"Minimum allowed value for control signal. Used primarily when solving " "for control values." More...
double	max_control
	"Maximum allowed value for control signal. Used primarily when solving " "for control values." More...
double	actuation
	Provides the value of getActuation() and is available at stage SimTK::Stage::Velocity . More...
double	speed
	Provides the value of getSpeed() and is available at stage SimTK::Stage::Velocity . More...
OpenSim Properties, Sockets, Outputs, Inputs inherited from OpenSim::Actuator
double	power
	Provides the value of getPower() and is available at stage SimTK::Stage::Dynamics . More...
OpenSim Properties, Sockets, Outputs, Inputs inherited from OpenSim::Force
bool	appliesForce
	"Flag indicating whether the force is applied or not. If true the force" "is applied to the MultibodySystem otherwise the force is not applied." "NOTE: Prior to OpenSim 4.0, this behavior was controlled by the " "'isDisabled' property, where 'true' meant that force was not being " "applied. Thus, if 'isDisabled' is true, then 'appliesForce` is false." More...
double	potential_energy
	Provides the value of computePotentialEnergy() and is available at stage SimTK::Stage::Velocity . More...
OpenSim Properties, Sockets, Outputs, Inputs inherited from OpenSim::Component
Component	components
	"List of components that this component owns and serializes." More...

Public Member Functions
	Millard2012AccelerationMuscle ()
	Default constructor: produces a non-functional empty muscle. More...
	Millard2012AccelerationMuscle (const std::string &aName, double aMaxIsometricForce, double aOptimalFiberLength, double aTendonSlackLength, double aPennationAngle)
	Constructs a functional muscle using all of the default curves and activation model. More...
double	getFiberCompressiveForceLengthMultiplier (SimTK::State &s) const
	More...
double	getFiberCompressiveForceCosPennationMultiplier (SimTK::State &s) const
	More...
double	getTendonForceMultiplier (SimTK::State &s) const
	More...
double	getMass () const
	More...
const MuscleFirstOrderActivationDynamicModel &	getActivationModel () const
	More...
const MuscleFixedWidthPennationModel &	getPennationModel () const
	More...
const ActiveForceLengthCurve &	getActiveForceLengthCurve () const
	More...
const ForceVelocityCurve &	getForceVelocityCurve () const
	More...
const FiberForceLengthCurve &	getFiberForceLengthCurve () const
	More...
const TendonForceLengthCurve &	getTendonForceLengthCurve () const
	More...
const FiberCompressiveForceLengthCurve &	getFiberCompressiveForceLengthCurve () const
	More...
const FiberCompressiveForceCosPennationCurve &	getFiberCompressiveForceCosPennationCurve () const
	More...
double	getFiberStiffnessAlongTendon (const SimTK::State &s) const
	More...
void	setActivationModel (MuscleFirstOrderActivationDynamicModel &aActivationMdl)
	More...
void	setActiveForceLengthCurve (ActiveForceLengthCurve &aActiveForceLengthCurve)
	More...
void	setForceVelocityCurve (ForceVelocityCurve &aForceVelocityCurve)
	More...
void	setFiberForceLengthCurve (FiberForceLengthCurve &aFiberForceLengthCurve)
	More...
void	setTendonForceLengthCurve (TendonForceLengthCurve &aTendonForceLengthCurve)
	More...
void	setFiberCompressiveForceLengthCurve (FiberCompressiveForceLengthCurve &aFiberCompressiveForceLengthCurve)
	More...
void	setFiberCompressiveForceCosPennationCurve (FiberCompressiveForceCosPennationCurve &aFiberCompressiveForceCosPennationCurve)
	More...
void	setMass (double mass)
	More...
double	getDefaultActivation () const
	More...
double	getDefaultFiberLength () const
	More...
double	getDefaultFiberVelocity () const
	More...
double	getActivationRate (const SimTK::State &s) const
	More...
double	getFiberVelocity (const SimTK::State &s) const
	More...
double	getFiberAcceleration (const SimTK::State &s) const
	More...
void	setDefaultActivation (double activation)
	More...
void	setDefaultFiberLength (double fiberLength)
	More...
void	setDefaultFiberVelocity (double fiberVelocity)
	More...
void	setActivation (SimTK::State &s, double activation) const override
	More...
void	setFiberLength (SimTK::State &s, double fiberLength) const
	More...
void	setFiberVelocity (SimTK::State &s, double fiberVelocity) const
	More...
double	computeActuation (const SimTK::State &s) const override final
	More...
void	computeInitialFiberEquilibrium (SimTK::State &s) const override final
	This function computes the fiber length such that muscle fiber and tendon are developing the same force, and so that the velocity of the entire muscle-tendon is spread between the fiber and the tendon according to their relative compliances. More...
void	extendPostScale (const SimTK::State &s, const ScaleSet &scaleSet) override
	Adjust the properties of the muscle after the model has been scaled. More...
Property-related functions
const double &	get_default_activation () const
	Get the value of the default_activation property. More...
double &	upd_default_activation ()
	Get a writable reference to the default_activation property. More...
void	set_default_activation (const double &value)
	Set the value of the default_activation property. More...
const double &	get_default_fiber_length () const
	Get the value of the default_fiber_length property. More...
double &	upd_default_fiber_length ()
	Get a writable reference to the default_fiber_length property. More...
void	set_default_fiber_length (const double &value)
	Set the value of the default_fiber_length property. More...
const double &	get_default_fiber_velocity () const
	Get the value of the default_fiber_velocity property. More...
double &	upd_default_fiber_velocity ()
	Get a writable reference to the default_fiber_velocity property. More...
void	set_default_fiber_velocity (const double &value)
	Set the value of the default_fiber_velocity property. More...
const MuscleFirstOrderActivationDynamicModel &	get_MuscleFirstOrderActivationDynamicModel () const
	Get the value of the MuscleFirstOrderActivationDynamicModel property. More...
MuscleFirstOrderActivationDynamicModel &	upd_MuscleFirstOrderActivationDynamicModel ()
	Get a writable reference to the MuscleFirstOrderActivationDynamicModel property. More...
void	set_MuscleFirstOrderActivationDynamicModel (const MuscleFirstOrderActivationDynamicModel &value)
	Set the value of the MuscleFirstOrderActivationDynamicModel property. More...
const ActiveForceLengthCurve &	get_ActiveForceLengthCurve () const
	Get the value of the ActiveForceLengthCurve property. More...
ActiveForceLengthCurve &	upd_ActiveForceLengthCurve ()
	Get a writable reference to the ActiveForceLengthCurve property. More...
void	set_ActiveForceLengthCurve (const ActiveForceLengthCurve &value)
	Set the value of the ActiveForceLengthCurve property. More...
const ForceVelocityCurve &	get_ForceVelocityCurve () const
	Get the value of the ForceVelocityCurve property. More...
ForceVelocityCurve &	upd_ForceVelocityCurve ()
	Get a writable reference to the ForceVelocityCurve property. More...
void	set_ForceVelocityCurve (const ForceVelocityCurve &value)
	Set the value of the ForceVelocityCurve property. More...
const FiberForceLengthCurve &	get_FiberForceLengthCurve () const
	Get the value of the FiberForceLengthCurve property. More...
FiberForceLengthCurve &	upd_FiberForceLengthCurve ()
	Get a writable reference to the FiberForceLengthCurve property. More...
void	set_FiberForceLengthCurve (const FiberForceLengthCurve &value)
	Set the value of the FiberForceLengthCurve property. More...
const TendonForceLengthCurve &	get_TendonForceLengthCurve () const
	Get the value of the TendonForceLengthCurve property. More...
TendonForceLengthCurve &	upd_TendonForceLengthCurve ()
	Get a writable reference to the TendonForceLengthCurve property. More...
void	set_TendonForceLengthCurve (const TendonForceLengthCurve &value)
	Set the value of the TendonForceLengthCurve property. More...
const FiberCompressiveForceLengthCurve &	get_FiberCompressiveForceLengthCurve () const
	Get the value of the FiberCompressiveForceLengthCurve property. More...
FiberCompressiveForceLengthCurve &	upd_FiberCompressiveForceLengthCurve ()
	Get a writable reference to the FiberCompressiveForceLengthCurve property. More...
void	set_FiberCompressiveForceLengthCurve (const FiberCompressiveForceLengthCurve &value)
	Set the value of the FiberCompressiveForceLengthCurve property. More...
const FiberCompressiveForceCosPennationCurve &	get_FiberCompressiveForceCosPennationCurve () const
	Get the value of the FiberCompressiveForceCosPennationCurve property. More...
FiberCompressiveForceCosPennationCurve &	upd_FiberCompressiveForceCosPennationCurve ()
	Get a writable reference to the FiberCompressiveForceCosPennationCurve property. More...
void	set_FiberCompressiveForceCosPennationCurve (const FiberCompressiveForceCosPennationCurve &value)
	Set the value of the FiberCompressiveForceCosPennationCurve property. More...
const double &	get_fiber_damping () const
	Get the value of the fiber_damping property. More...
double &	upd_fiber_damping ()
	Get a writable reference to the fiber_damping property. More...
void	set_fiber_damping (const double &value)
	Set the value of the fiber_damping property. More...
const double &	get_fiber_force_length_damping () const
	Get the value of the fiber_force_length_damping property. More...
double &	upd_fiber_force_length_damping ()
	Get a writable reference to the fiber_force_length_damping property. More...
void	set_fiber_force_length_damping (const double &value)
	Set the value of the fiber_force_length_damping property. More...
const double &	get_fiber_compressive_force_length_damping () const
	Get the value of the fiber_compressive_force_length_damping property. More...
double &	upd_fiber_compressive_force_length_damping ()
	Get a writable reference to the fiber_compressive_force_length_damping property. More...
void	set_fiber_compressive_force_length_damping (const double &value)
	Set the value of the fiber_compressive_force_length_damping property. More...
const double &	get_fiber_compressive_force_cos_pennation_damping () const
	Get the value of the fiber_compressive_force_cos_pennation_damping property. More...
double &	upd_fiber_compressive_force_cos_pennation_damping ()
	Get a writable reference to the fiber_compressive_force_cos_pennation_damping property. More...
void	set_fiber_compressive_force_cos_pennation_damping (const double &value)
	Set the value of the fiber_compressive_force_cos_pennation_damping property. More...
const double &	get_tendon_force_length_damping () const
	Get the value of the tendon_force_length_damping property. More...
double &	upd_tendon_force_length_damping ()
	Get a writable reference to the tendon_force_length_damping property. More...
void	set_tendon_force_length_damping (const double &value)
	Set the value of the tendon_force_length_damping property. More...
const double &	get_mass () const
	Get the value of the mass property. More...
double &	upd_mass ()
	Get a writable reference to the mass property. More...
void	set_mass (const double &value)
	Set the value of the mass property. More...
Public Member Functions inherited from OpenSim::Muscle
const double &	get_max_isometric_force () const
	Get the value of the max_isometric_force property. More...
double &	upd_max_isometric_force ()
	Get a writable reference to the max_isometric_force property. More...
void	set_max_isometric_force (const double &value)
	Set the value of the max_isometric_force property. More...
const double &	get_optimal_fiber_length () const
	Get the value of the optimal_fiber_length property. More...
double &	upd_optimal_fiber_length ()
	Get a writable reference to the optimal_fiber_length property. More...
void	set_optimal_fiber_length (const double &value)
	Set the value of the optimal_fiber_length property. More...
const double &	get_tendon_slack_length () const
	Get the value of the tendon_slack_length property. More...
double &	upd_tendon_slack_length ()
	Get a writable reference to the tendon_slack_length property. More...
void	set_tendon_slack_length (const double &value)
	Set the value of the tendon_slack_length property. More...
const double &	get_pennation_angle_at_optimal () const
	Get the value of the pennation_angle_at_optimal property. More...
double &	upd_pennation_angle_at_optimal ()
	Get a writable reference to the pennation_angle_at_optimal property. More...
void	set_pennation_angle_at_optimal (const double &value)
	Set the value of the pennation_angle_at_optimal property. More...
const double &	get_max_contraction_velocity () const
	Get the value of the max_contraction_velocity property. More...
double &	upd_max_contraction_velocity ()
	Get a writable reference to the max_contraction_velocity property. More...
void	set_max_contraction_velocity (const double &value)
	Set the value of the max_contraction_velocity property. More...
const bool &	get_ignore_tendon_compliance () const
	Get the value of the ignore_tendon_compliance property. More...
bool &	upd_ignore_tendon_compliance ()
	Get a writable reference to the ignore_tendon_compliance property. More...
void	set_ignore_tendon_compliance (const bool &value)
	Set the value of the ignore_tendon_compliance property. More...
const bool &	get_ignore_activation_dynamics () const
	Get the value of the ignore_activation_dynamics property. More...
bool &	upd_ignore_activation_dynamics ()
	Get a writable reference to the ignore_activation_dynamics property. More...
void	set_ignore_activation_dynamics (const bool &value)
	Set the value of the ignore_activation_dynamics property. More...
	Muscle ()
	Default constructor. More...
double	getMaxIsometricForce () const
	get/set the maximum isometric force (in N) that the fibers can generate More...
void	setMaxIsometricForce (double maxIsometricForce)
double	getOptimalFiberLength () const
	get/set the optimal length (in m) of the muscle fibers (lumped as a single fiber) More...
void	setOptimalFiberLength (double optimalFiberLength)
double	getTendonSlackLength () const
	get/set the resting (slack) length (in m) of the tendon that is in series with the muscle fiber More...
void	setTendonSlackLength (double tendonSlackLength)
double	getPennationAngleAtOptimalFiberLength () const
	get/set the angle (in radians) between fibers at their optimal fiber length and the tendon More...
void	setPennationAngleAtOptimalFiberLength (double pennationAngle)
double	getMaxContractionVelocity () const
	get/set the maximum contraction velocity of the fibers, in optimal fiber-lengths per second More...
void	setMaxContractionVelocity (double maxContractionVelocity)
bool	getIgnoreTendonCompliance (const SimTK::State &s) const
	Get/set Modeling (runtime) option to ignore tendon compliance when computing muscle dynamics. More...
void	setIgnoreTendonCompliance (SimTK::State &s, bool ignore) const
bool	getIgnoreActivationDynamics (const SimTK::State &s) const
	Get/set Modeling (runtime) option to ignore activation dynamics when computing muscle dynamics. More...
void	setIgnoreActivationDynamics (SimTK::State &s, bool ignore) const
virtual double	getActivation (const SimTK::State &s) const
	get the activation level of the muscle, which modulates the active force of the muscle and has a normalized (0 to 1) value Note: method remains virtual to permit override by deprecated muscles. More...
double	getFiberLength (const SimTK::State &s) const
	get the current working fiber length (m) for the muscle More...
double	getPennationAngle (const SimTK::State &s) const
	get the current pennation angle (radians) between the fiber and tendon at the current fiber length More...
double	getCosPennationAngle (const SimTK::State &s) const
	get the cosine of the current pennation angle (radians) between the fiber and tendon at the current fiber length More...
double	getTendonLength (const SimTK::State &s) const
	get the current tendon length (m) given the current joint angles and fiber length More...
double	getNormalizedFiberLength (const SimTK::State &s) const
	get the current normalized fiber length (fiber_length/optimal_fiber_length) More...
double	getFiberLengthAlongTendon (const SimTK::State &s) const
	get the current fiber length (m) projected (*cos(pennationAngle)) onto the tendon direction More...
double	getTendonStrain (const SimTK::State &s) const
	get the current tendon strain (delta_l/tendon_slack_length is dimensionless) More...
double	getFiberPotentialEnergy (const SimTK::State &s) const
	the potential energy (J) stored in the fiber due to its parallel elastic element More...
double	getTendonPotentialEnergy (const SimTK::State &s) const
	the potential energy (J) stored in the tendon More...
double	getMusclePotentialEnergy (const SimTK::State &s) const
	the total potential energy (J) stored in the muscle More...
double	getPassiveForceMultiplier (const SimTK::State &s) const
	get the passive fiber (parallel elastic element) force multiplier More...
double	getActiveForceLengthMultiplier (const SimTK::State &s) const
	get the active fiber (contractile element) force multiplier due to current fiber length More...
double	getFiberVelocity (const SimTK::State &s) const
	get current fiber velocity (m/s) positive is lengthening More...
double	getNormalizedFiberVelocity (const SimTK::State &s) const
	get normalized fiber velocity. More...
double	getFiberVelocityAlongTendon (const SimTK::State &s) const
	get the current fiber velocity (m/s) projected onto the tendon direction More...
double	getPennationAngularVelocity (const SimTK::State &s) const
	get pennation angular velocity (radians/s) More...
double	getTendonVelocity (const SimTK::State &s) const
	get the tendon velocity (m/s) positive is lengthening More...
double	getForceVelocityMultiplier (const SimTK::State &s) const
	get the dimensionless multiplier resulting from the fiber's force-velocity curve More...
double	getFiberForce (const SimTK::State &s) const
	get the current fiber force (N) applied to the tendon More...
double	getFiberForceAlongTendon (const SimTK::State &s) const
	get the force of the fiber (N/m) along the direction of the tendon More...
double	getActiveFiberForce (const SimTK::State &s) const
	get the current active fiber force (N) due to activation*force_length*force_velocity relationships More...
double	getPassiveFiberForce (const SimTK::State &s) const
	get the total force applied by all passive elements in the fiber (N) More...
double	getActiveFiberForceAlongTendon (const SimTK::State &s) const
	get the current active fiber force (N) projected onto the tendon direction More...
double	getPassiveFiberForceAlongTendon (const SimTK::State &s) const
	get the total force applied by all passive elements in the fiber (N) projected onto the tendon direction More...
double	getTendonForce (const SimTK::State &s) const
	get the current tendon force (N) applied to bones More...
double	getFiberStiffness (const SimTK::State &s) const
	get the current fiber stiffness (N/m) defined as the partial derivative of fiber force with respect to fiber length More...
double	getFiberStiffnessAlongTendon (const SimTK::State &s) const
	get the stiffness of the fiber (N/m) along the direction of the tendon, that is the partial derivative of the fiber force along the tendon with respect to small changes in fiber length along the tendon More...
double	getTendonStiffness (const SimTK::State &s) const
	get the current tendon stiffness (N/m) defined as the partial derivative of tendon force with respect to tendon length More...
double	getMuscleStiffness (const SimTK::State &s) const
	get the current muscle stiffness (N/m) defined as the partial derivative of muscle force with respect to muscle length More...
double	getFiberActivePower (const SimTK::State &s) const
	get the current active fiber power (W) More...
double	getFiberPassivePower (const SimTK::State &s) const
	get the current passive fiber power (W) More...
double	getTendonPower (const SimTK::State &s) const
	get the current tendon power (W) More...
double	getMusclePower (const SimTK::State &s) const
	get the current muscle power (W) More...
double	getStress (const SimTK::State &s) const override
	get the stress in the muscle (part of the Actuator interface as well) More...
void	setExcitation (SimTK::State &s, double excitation) const
	set the excitation (control) for this muscle. More...
double	getExcitation (const SimTK::State &s) const
void	computeEquilibrium (SimTK::State &s) const override final
	Find and set the equilibrium state of the muscle (if any) More...
void	assign (Object &aObject) override
	This allows copy assignment in the Java GUI. More...
Public Member Functions inherited from OpenSim::PathActuator
	PathActuator ()
AbstractGeometryPath &	updPath ()
const AbstractGeometryPath &	getPath () const
template<typename PathType >
PathType &	updPath ()
template<typename PathType >
const PathType &	getPath () const
template<typename PathType >
PathType *	tryUpdPath ()
template<typename PathType >
const PathType *	tryGetPath () const
GeometryPath &	updGeometryPath ()
const GeometryPath &	getGeometryPath () const
bool	hasVisualPath () const override
	Return a flag indicating whether the Force is applied along a path that can be visualized. More...
void	setOptimalForce (double aOptimalForce)
double	getOptimalForce () const override
virtual double	getLength (const SimTK::State &s) const
virtual double	getLengtheningSpeed (const SimTK::State &s) const
double	getSpeed (const SimTK::State &s) const final
double	getPower (const SimTK::State &s) const override
double	getStress (const SimTK::State &s) const override
void	addNewPathPoint (const std::string &proposedName, const PhysicalFrame &aBody, const SimTK::Vec3 &aPositionOnBody)
double	computeActuation (const SimTK::State &s) const override
virtual double	computeMomentArm (const SimTK::State &s, Coordinate &aCoord) const
const AbstractGeometryPath &	get_path () const
	Get the value of the path property. More...
AbstractGeometryPath &	upd_path ()
	Get a writable reference to the path property. More...
void	set_path (const AbstractGeometryPath &value)
	Set the value of the path property. More...
const double &	get_optimal_force () const
	Get the value of the optimal_force property. More...
double &	upd_optimal_force ()
	Get a writable reference to the optimal_force property. More...
void	set_optimal_force (const double &value)
	Set the value of the optimal_force property. More...
void	assign (Object &aObject) override
	This allows copy assignment in the Java GUI. More...
PathActuator *	clone () const override
	Create a new heap-allocated copy of the concrete object to which this Object refers. More...
const std::string &	getConcreteClassName () const override
	Returns the class name of the concrete Object-derived class of the actual object referenced by this Object, as a string. More...
Public Member Functions inherited from OpenSim::ScalarActuator
	ScalarActuator ()
virtual double	getControl (const SimTK::State &s) const
	Convenience method to get control given scalar (double) valued control. More...
int	numControls () const override
virtual void	setActuation (const SimTK::State &s, double aActuation) const
virtual double	getActuation (const SimTK::State &s) const
void	setMinControl (const double &aMinControl)
	Methods to manage the bounds on ScalarActuator's control. More...
double	getMinControl () const
void	setMaxControl (const double &aMaxControl)
double	getMaxControl () const
void	overrideActuation (SimTK::State &s, bool flag) const
	Enable/disable a ScalarActuator's override actuation. More...
bool	isActuationOverridden (const SimTK::State &s) const
	return ScalarActuator's override status More...
void	setOverrideActuation (SimTK::State &s, double value) const
	set the actuation value used when the override is true More...
double	getOverrideActuation (const SimTK::State &s) const
	return override actuation More...
const double &	get_min_control () const
	Get the value of the min_control property. More...
double &	upd_min_control ()
	Get a writable reference to the min_control property. More...
void	set_min_control (const double &value)
	Set the value of the min_control property. More...
const double &	get_max_control () const
	Get the value of the max_control property. More...
double &	upd_max_control ()
	Get a writable reference to the max_control property. More...
void	set_max_control (const double &value)
	Set the value of the max_control property. More...
void	assign (Object &aObject) override
	This allows copy assignment in the Java GUI. More...
Public Member Functions inherited from OpenSim::Actuator
	Actuator ()
virtual const SimTK::Vector	getDefaultControls ()
	Actuator default controls are zero. More...
virtual const SimTK::VectorView_< double >	getControls (const SimTK::State &s) const
virtual void	getControls (const SimTK::Vector &modelControls, SimTK::Vector &actuatorControls) const
	Convenience methods for getting, setting and adding to actuator controls from/into the model controls. More...
virtual void	setControls (const SimTK::Vector &actuatorControls, SimTK::Vector &modelControls) const
	set actuator controls subvector into the right slot in the system-wide model controls More...
virtual void	addInControls (const SimTK::Vector &actuatorControls, SimTK::Vector &modelControls) const
	add actuator controls to the values already occupying the slot in the system-wide model controls More...
void	assign (Object &aObject) override
	This allows copy assignment in the Java GUI. More...
Public Member Functions inherited from OpenSim::Force
virtual bool	shouldBeParallelized () const
	Tell Simbody to parallelize this force. More...
bool	appliesForce (const SimTK::State &s) const
	Return if the Force is applied (or enabled) or not. More...
void	setAppliesForce (SimTK::State &s, bool applyForce) const
	Set whether or not the Force is applied. More...
SimTK::ForceIndex	getForceIndex () const
	Return the index to the SimTK::Force in the underlying system. More...
const bool &	get_appliesForce () const
	Get the value of the appliesForce property. More...
bool &	upd_appliesForce ()
	Get a writable reference to the appliesForce property. More...
void	set_appliesForce (const bool &value)
	Set the value of the appliesForce property. More...
void	assign (Object &aObject) override
	This allows copy assignment in the Java GUI. More...
Public Member Functions inherited from OpenSim::ModelComponent
	ModelComponent ()
	Default constructor. More...
	ModelComponent (const std::string &aFileName, bool aUpdateFromXMLNode=true)
	Construct ModelComponent from an XML file. More...
	ModelComponent (SimTK::Xml::Element &aNode)
	Construct ModelComponent from a specific node in an XML document. More...
virtual	~ModelComponent ()
	Destructor is virtual to allow concrete model component cleanup. More...
void	connectToModel (Model &model)
	Connect this ModelComponent to its aggregate- a Model. More...
const Model &	getModel () const
	Get a const reference to the Model this component is part of. More...
Model &	updModel ()
	Get a modifiable reference to the Model this component is part of. More...
bool	hasModel () const
	Does this ModelComponent have a Model associated with it? More...
void	preScale (const SimTK::State &s, const ScaleSet &scaleSet)
	Perform any computations that must occur before ModelComponent::scale() is invoked on all ModelComponents in the Model. More...
void	scale (const SimTK::State &s, const ScaleSet &scaleSet)
	Scale the ModelComponent. More...
void	postScale (const SimTK::State &s, const ScaleSet &scaleSet)
	Perform any computations that must occur after ModelComponent::scale() has been invoked on all ModelComponents in the Model. More...
void	assign (Object &aObject) override
	This allows copy assignment in the Java GUI. More...
Public Member Functions inherited from OpenSim::Component
	Component ()
	Default constructor. More...
	Component (const std::string &aFileName, bool aUpdateFromXMLNode=true)
	Construct Component from an XML file. More...
	Component (SimTK::Xml::Element &aNode)
	Construct Component from a specific node in an XML document. More...
	Component (const Component &)=default
	Use default copy constructor and assignment operator. More...
Component &	operator= (const Component &)=default
virtual	~Component ()=default
	Destructor is virtual to allow concrete Component to cleanup. More...
virtual void	generateDecorations (bool fixed, const ModelDisplayHints &hints, const SimTK::State &state, SimTK::Array_< SimTK::DecorativeGeometry > &appendToThis) const
	Optional method for generating arbitrary display geometry that reflects this Component at the specified state. More...
const SimTK::MultibodySystem &	getSystem () const
	Get the underlying MultibodySystem that this component is connected to. More...
bool	hasSystem () const
	Check if this component has an underlying MultibodySystem. More...
bool	isComponentInOwnershipTree (const Component *component) const
	Does the provided component already exist anywhere in the ownership tree (not just subcomponents of this component)? More...
void	addComponent (Component *subcomponent)
	Add a Component (as a subcomponent) of this component. More...
template<typename T = Component>
ComponentList< const T >	getComponentList () const
	Get an iterator through the underlying subcomponents that this component is composed of. More...
template<typename T = Component>
ComponentList< T >	updComponentList ()
	Similar to getComponentList(), except the resulting list allows one to modify the components. More...
template<typename T = Component>
unsigned	countNumComponents () const
	Uses getComponentList<T>() to count the number of underlying subcomponents of the specified type. More...
std::string	getAbsolutePathString () const
	Get the complete (absolute) pathname for this Component to its ancestral Component, which is the root of the tree to which this Component belongs. More...
ComponentPath	getAbsolutePath () const
	Return a ComponentPath of the absolute path of this Component. More...
std::string	getRelativePathString (const Component &wrt) const
	Get the relative path of this Component with respect to another Component, as a string. More...
ComponentPath	getRelativePath (const Component &wrt) const
	Get the relative path of this Component with respect to another Component. More...
bool	hasComponent (const std::string &pathname) const
	Query if there is a component (of any type) at the specified path name. More...
template<class C = Component>
bool	hasComponent (const std::string &pathname) const
	Query if there is a component of a given type at the specified path name. More...
template<class C = Component>
const C &	getComponent (const std::string &pathname) const
	Get a unique subcomponent of this Component by its path name and type 'C'. More...
template<class C = Component>
const C &	getComponent (const ComponentPath &pathname) const
const Component &	getComponent (const std::string &pathname) const
	Similar to the templatized getComponent(), except this returns the component as the generic Component type. More...
template<class C = Component>
C &	updComponent (const std::string &name)
	Get a writable reference to a subcomponent. More...
template<class C = Component>
C &	updComponent (const ComponentPath &name)
Component &	updComponent (const std::string &pathname)
	Similar to the templatized updComponent(), except this returns the component as the generic Component type. More...
unsigned	printComponentsMatching (const std::string &substring) const
	Print a list to the console of all components whose absolute path name contains the given string. More...
int	getNumStateVariables () const
	Get the number of "continuous" state variables maintained by the Component and its subcomponents. More...
Array< std::string >	getStateVariableNames () const
	Get the names of continuous state variables maintained by the Component and its subcomponents. More...
Array< std::string >	getDiscreteVariableNames () const
	Get the names of discrete state variables maintained by the Component and its subcomponents. More...
Array< std::string >	getModelingOptionNames () const
	Get the names of the modeling options maintained by the Component and its subcomponents. More...
void	finalizeFromProperties ()
	Define a Component's internal data members and structure according to its properties. More...
void	finalizeConnections (Component &root)
	Satisfy the Component's connections specified by its Sockets and Inputs. More...
void	clearConnections ()
	Disconnect/clear this Component from its aggregate component. More...
void	addToSystem (SimTK::MultibodySystem &system) const
	Have the Component add itself to the underlying computational System. More...
void	initStateFromProperties (SimTK::State &state) const
	Initialize Component's state variable values from its properties. More...
void	setPropertiesFromState (const SimTK::State &state)
	Set Component's properties given a state. More...
int	getNumSockets () const
	Get the number of Sockets in this Component. More...
std::vector< std::string >	getSocketNames () const
	Collect and return the names of the sockets in this component. More...
template<typename T >
const T &	getConnectee (const std::string &name) const
	Get the "connectee" object that the Component's Socket is bound to. More...
template<typename T >
const T &	getConnectee (const std::string &name, int index) const
	Get the "connectee" object at the provided index that the Component's Socket is bound to. More...
const Object &	getConnectee (const std::string &name) const
	Get the connectee as an Object. More...
const Object &	getConnectee (const std::string &name, int index) const
	Get the connectee at the provided index as an Object. More...
const AbstractSocket *	tryGetSocket (const std::string &name) const
	Returns a pointer to the AbstractSocket with a given socket name, or nullptr if the socket with the given name does not exist on the component. More...
const AbstractSocket &	getSocket (const std::string &name) const
	Get an AbstractSocket for the given socket name. More...
const AbstractSocket *	tryUpdSocket (const std::string &name)
	Returns a writable pointer to the AbstractSocket with a given socket name, or nullptr if the socket with the given name does not exist on the component. More...
AbstractSocket &	updSocket (const std::string &name)
	Get a writable reference to the AbstractSocket for the given socket name. More...
template<typename T >
const Socket< T > &	getSocket (const std::string &name) const
	Get a const reference to the concrete Socket provided by this Component by name. More...
template<typename T >
Socket< T > &	updSocket (const std::string &name)
	Get a writable reference to the concrete Socket provided by this Component by name. More...
int	getModelingOption (const SimTK::State &state, const std::string &path) const
	Based on a specified path, get the value of a modeling option. More...
int	getModelingOption (const SimTK::State &state, const ComponentPath &path) const
void	setModelingOption (SimTK::State &state, const std::string &path, int flag) const
	Based on a specified path, set the value of a modeling option. More...
void	setModelingOption (SimTK::State &state, const ComponentPath &path, int flag) const
template<typename T >
const T &	getInputValue (const SimTK::State &state, const std::string &name) const
	Get the Input value that this component is dependent on. More...
template<typename T >
const T &	getOutputValue (const SimTK::State &state, const std::string &name) const
	Get the Output value provided by this Component by name. More...
double	getStateVariableValue (const SimTK::State &state, const std::string &name) const
	Get the value of a state variable allocated by this Component. More...
double	getStateVariableValue (const SimTK::State &state, const ComponentPath &path) const
	Get the value of a state variable allocated by this Component. More...
void	setStateVariableValue (SimTK::State &state, const std::string &name, double value) const
	Set the value of a state variable allocated by this Component by name. More...
SimTK::Vector	getStateVariableValues (const SimTK::State &state) const
	Get all values of the state variables allocated by this Component. More...
void	setStateVariableValues (SimTK::State &state, const SimTK::Vector &values) const
	Set all values of the state variables allocated by this Component. More...
double	getStateVariableDerivativeValue (const SimTK::State &state, const std::string &name) const
	Get the value of a state variable derivative computed by this Component. More...
double	getStateVariableDerivativeValue (const SimTK::State &state, const ComponentPath &path) const
	Get the value of a state variable derivative computed by this Component. More...
void	assign (Object &aObject) override
	This allows copy assignment in the Java GUI. More...
int	getNumInputs () const
	Access the number of Inputs that this component has. More...
int	getNumOutputs () const
	Access the number of Outputs that this component has. More...
std::vector< std::string >	getInputNames () const
	Collect and return the names of Inputs in this component as an std::vector. More...
std::vector< std::string >	getOutputNames () const
	Collect and return the names of Outputs in this component as an std::vector. More...
const AbstractInput &	getInput (const std::string &name) const
	Get an Input provided by this Component by name. More...
AbstractInput &	updInput (const std::string &name)
	Get a writable reference to an Input provided by this Component by name. More...
template<typename T >
const Input< T > &	getInput (const std::string &name) const
	Get a concrete Input that you can directly ask for its values. More...
const AbstractOutput *	tryGetOutput (const std::string &name) const
	If it exists on the component, returns a pointer to the named Output; otherwise, returns a nullptr. More...
const AbstractOutput &	getOutput (const std::string &name) const
	Get the Output provided by this Component by name. More...
AbstractOutput *	tryUpdOutput (const std::string &name)
	If it exists on the component returns a writable pointer to the named Output; otherwise, returns a nullptr More...
AbstractOutput &	updOutput (const std::string &name)
	Get a writable reference to an Output provided by this Component by name. More...
SimTK::IteratorRange< OutputConstIterator >	getOutputs () const
	Iterate through all Outputs of this component. More...
Public Member Functions inherited from OpenSim::Object
virtual	~Object ()
	Virtual destructor for cleanup. More...
bool	isEqualTo (const Object &aObject) const
	Equality operator wrapper for use from languages not supporting operator overloading. More...
Object &	operator= (const Object &aObject)
	Copy assignment copies he base class fields, including the properties. More...
virtual bool	operator== (const Object &aObject) const
	Determine if two objects are equal. More...
virtual bool	operator< (const Object &aObject) const
	Provide an ordering for objects so they can be put in sorted containers. More...
void	setName (const std::string &name)
	Set the name of the Object. More...
const std::string &	getName () const
	Get the name of this Object. More...
void	setDescription (const std::string &description)
	Set description, a one-liner summary. More...
const std::string &	getDescription () const
	Get description, a one-liner summary. More...
const std::string &	getAuthors () const
	Get Authors of this Object. More...
void	setAuthors (const std::string &authors)
	Set Authors of this object. More...
const std::string &	getReferences () const
	Get references or publications to cite if using this object. More...
void	setReferences (const std::string &references)
	Set references or publications to cite if using this object. More...
int	getNumProperties () const
	Determine how many properties are stored with this Object. More...
const AbstractProperty &	getPropertyByIndex (int propertyIndex) const
	Get a const reference to a property by its index number, returned as an AbstractProperty. More...
AbstractProperty &	updPropertyByIndex (int propertyIndex)
	Get a writable reference to a property by its index number, returned as an AbstractProperty. More...
bool	hasProperty (const std::string &name) const
	Return true if this Object has a property of any type with the given name, which must not be empty. More...
const AbstractProperty &	getPropertyByName (const std::string &name) const
	Get a const reference to a property by its name, returned as an AbstractProperty. More...
AbstractProperty &	updPropertyByName (const std::string &name)
	Get a writable reference to a property by its name, returned as an AbstractProperty. More...
template<class T >
bool	hasProperty () const
	Return true if this Object contains an unnamed, one-object property that contains objects of the given template type T. More...
template<class T >
const Property< T > &	getProperty (const PropertyIndex &index) const
	Get property of known type Property<T> as a const reference; the property must be present and have the right type. More...
template<class T >
const Property< T > &	getPropertyByName (const std::string &name) const
	Get property of known type Property<T> as a const reference; the property must be present and have the right type. More...
template<class T >
Property< T > &	updProperty (const PropertyIndex &index)
	Get property of known type Property<T> as a writable reference; the property must be present and have the right type. More...
template<class T >
Property< T > &	updPropertyByName (const std::string &name)
	Get property of known type Property<T> as a writable reference; the property must be present and have the right type. More...
bool	isObjectUpToDateWithProperties () const
	Returns true if no property's value has changed since the last time setObjectIsUpToDateWithProperties() was called. More...
void	readObjectFromXMLNodeOrFile (SimTK::Xml::Element &objectElement, int versionNumber)
	We're given an XML element from which we are to populate this Object. More...
void	updateXMLNode (SimTK::Xml::Element &parent, const AbstractProperty *prop=nullptr) const
	Serialize this object into the XML node that represents it. More...
bool	getInlined () const
	Inlined means an in-memory Object that is not associated with an XMLDocument. More...
void	setInlined (bool aInlined, const std::string &aFileName="")
	Mark this as inlined or not and optionally provide a file name to associate with the new XMLDocument for the non-inline case. More...
std::string	getDocumentFileName () const
	If there is a document associated with this object then return the file name maintained by the document. More...
int	getDocumentFileVersion () const
	If there is a document associated with this object then return its version number. More...
void	setAllPropertiesUseDefault (bool aUseDefault)
bool	print (const std::string &fileName) const
	Write this Object into an XML file of the given name; conventionally the suffix to use is ".osim". More...
std::string	dump () const
	dump the XML representation of this Object into an std::string and return it. More...
virtual bool	isA (const char *type) const
	The default implementation returns true only if the supplied string is "Object"; each Object-derived class overrides this to match its own class name. More...
const std::string &	toString () const
	Wrapper to be used on Java side to display objects in tree; this returns just the object's name. More...
PropertySet &	getPropertySet ()
	OBSOLETE: Get a reference to the PropertySet maintained by the Object. More...
const PropertySet &	getPropertySet () const

Public Types
typedef Millard2012AccelerationMuscle	Self
	This typedef might be useful within the member functions of this class. More...
typedef Muscle	Super
	Use this typedef to refer to the superclass of this class. More...
Public Types inherited from OpenSim::Muscle
typedef Muscle	Self
	This typedef might be useful within the member functions of this class. More...
typedef PathActuator	Super
	Use this typedef to refer to the superclass of this class. More...
Public Types inherited from OpenSim::PathActuator
typedef PathActuator	Self
	This typedef might be useful within the member functions of this class. More...
typedef ScalarActuator	Super
	Use this typedef to refer to the superclass of this class. More...
Public Types inherited from OpenSim::ScalarActuator
typedef ScalarActuator	Self
	This typedef might be useful within the member functions of this class. More...
typedef Actuator	Super
	Use this typedef to refer to the superclass of this class. More...
Public Types inherited from OpenSim::Actuator
typedef Actuator	Self
	This typedef might be useful within the member functions of this class. More...
typedef Force	Super
	Use this typedef to refer to the superclass of this class. More...
Public Types inherited from OpenSim::Force
typedef Force	Self
	This typedef might be useful within the member functions of this class. More...
typedef ModelComponent	Super
	Use this typedef to refer to the superclass of this class. More...
Public Types inherited from OpenSim::ModelComponent
typedef ModelComponent	Self
	This typedef might be useful within the member functions of this class. More...
typedef Component	Super
	Use this typedef to refer to the superclass of this class. More...
Public Types inherited from OpenSim::Component
typedef Component	Self
	This typedef might be useful within the member functions of this class. More...
typedef Object	Super
	Use this typedef to refer to the superclass of this class. More...
typedef std::map< std::string, SimTK::ClonePtr< AbstractOutput > >::const_iterator	OutputConstIterator
	Define OutputConstIterator for convenience. More...

Protected Member Functions
double	calcActivationRate (const SimTK::State &s) const
	More...
void	calcMuscleLengthInfo (const SimTK::State &s, MuscleLengthInfo &mli) const override final
	calculate muscle's position related values such fiber and tendon lengths, normalized lengths, pennation angle, etc... More...
void	calcFiberVelocityInfo (const SimTK::State &s, FiberVelocityInfo &fvi) const override final
	calculate muscle's velocity related values such fiber and tendon velocities,normalized velocities, pennation angular velocity, etc... More...
void	calcMuscleDynamicsInfo (const SimTK::State &s, MuscleDynamicsInfo &mdi) const override final
	calculate muscle's active and passive force-length, force-velocity, tendon force, relationships and their related values More...
void	calcMusclePotentialEnergyInfo (const SimTK::State &s, MusclePotentialEnergyInfo &mpei) const override final
	calculate muscle's fiber and tendon potential energy More...
void	extendAddToSystem (SimTK::MultibodySystem &system) const override final
	Creates the ModelComponent so that it can be used in simulation. More...
void	extendInitStateFromProperties (SimTK::State &s) const override final
	Initializes the state of the ModelComponent. More...
void	extendSetPropertiesFromState (const SimTK::State &s) override final
	Sets the default state for ModelComponent. More...
void	computeStateVariableDerivatives (const SimTK::State &s) const override final
	computes state variable derivatives More...
void	setStateVariableDeriv (const SimTK::State &s, const std::string &aStateName, double aValue) const
	Set the derivative of an actuator state, specified by name More...
double	getStateVariableDeriv (const SimTK::State &s, const std::string &aStateName) const
	Get the derivative of an actuator state, by index. More...
Protected Member Functions inherited from OpenSim::Muscle
const MuscleLengthInfo &	getMuscleLengthInfo (const SimTK::State &s) const
	Developer Access to intermediate values calculate by the muscle model. More...
MuscleLengthInfo &	updMuscleLengthInfo (const SimTK::State &s) const
const FiberVelocityInfo &	getFiberVelocityInfo (const SimTK::State &s) const
FiberVelocityInfo &	updFiberVelocityInfo (const SimTK::State &s) const
const MuscleDynamicsInfo &	getMuscleDynamicsInfo (const SimTK::State &s) const
MuscleDynamicsInfo &	updMuscleDynamicsInfo (const SimTK::State &s) const
const MusclePotentialEnergyInfo &	getMusclePotentialEnergyInfo (const SimTK::State &s) const
MusclePotentialEnergyInfo &	updMusclePotentialEnergyInfo (const SimTK::State &s) const
virtual double	calcMuscleStiffness (const SimTK::State &s) const
	Calculate muscle's stiffness. More...
void	computeForce (const SimTK::State &state, SimTK::Vector_< SimTK::SpatialVec > &bodyForces, SimTK::Vector &generalizedForce) const override
	Force interface applies tension to bodies, and Muscle also checks that applied muscle tension is not negative. More...
double	computePotentialEnergy (const SimTK::State &state) const override
	Potential energy stored by the muscle. More...
SimTK::Vec3	computePathColor (const SimTK::State &state) const override
	Override PathActuator virtual to calculate a preferred color for the muscle path based on activation. More...
void	extendConnectToModel (Model &aModel) override
	Model Component creation interface. More...
void	extendAddToSystem (SimTK::MultibodySystem &system) const override
void	extendSetPropertiesFromState (const SimTK::State &s) override
void	extendInitStateFromProperties (SimTK::State &state) const override
virtual void	updateGeometry (const SimTK::State &s)
Protected Member Functions inherited from OpenSim::PathActuator
void	extendRealizeDynamics (const SimTK::State &state) const override
	Extension of parent class method; derived classes may extend further. More...
Protected Member Functions inherited from OpenSim::ScalarActuator
void	extendAddToSystem (SimTK::MultibodySystem &system) const override
double	computeOverrideActuation (const SimTK::State &s) const
OpenSim::Array< std::string >	getRecordLabels () const override
	Methods to query a actuation for the value actually applied during simulation. More...
OpenSim::Array< double >	getRecordValues (const SimTK::State &state) const override
	Given SimTK::State object extract all the values necessary to report actuation, application location frame, etc. More...
Protected Member Functions inherited from OpenSim::Actuator
void	extendAddToSystem (SimTK::MultibodySystem &system) const override
Protected Member Functions inherited from OpenSim::Force
	Force ()
	Default constructor sets up Force-level properties; can only be called from a derived class constructor. More...
	Force (SimTK::Xml::Element &node)
	Deserialization from XML, necessary so that derived classes can (de)serialize. More...
void	extendInitStateFromProperties (SimTK::State &state) const override
	Subclass should override; be sure to invoke Super::extendInitStateFromProperties() at the beginning of the overriding method. More...
void	extendAddToSystem (SimTK::MultibodySystem &system) const override
	Default is to create a ForceAdapter which is a SimTK::Force::Custom as the underlying computational component. More...
void	extendSetPropertiesFromState (const SimTK::State &state) override
	Subclass should override; be sure to invoke Force::extendSetPropertiesFromState() at the beginning of the overriding method. More...
void	applyForceToPoint (const SimTK::State &state, const PhysicalFrame &body, const SimTK::Vec3 &point, const SimTK::Vec3 &force, SimTK::Vector_< SimTK::SpatialVec > &bodyForces) const
	Apply a force at a particular point (a "station") on a given body. More...
void	applyTorque (const SimTK::State &state, const PhysicalFrame &body, const SimTK::Vec3 &torque, SimTK::Vector_< SimTK::SpatialVec > &bodyForces) const
	Apply a torque to a particular body. More...
void	applyGeneralizedForce (const SimTK::State &state, const Coordinate &coord, double force, SimTK::Vector &generalizedForces) const
	Apply a generalized force. More...
Protected Member Functions inherited from OpenSim::ModelComponent
const SimTK::Vec3 &	getScaleFactors (const ScaleSet &scaleSet, const Frame &frame) const
	Get the scale factors corresponding to the base OpenSim::Body of the specified Frame. More...
virtual void	extendPreScale (const SimTK::State &s, const ScaleSet &scaleSet)
	Perform any computations that must occur before ModelComponent::scale() is invoked on all ModelComponents in the Model. More...
virtual void	extendScale (const SimTK::State &s, const ScaleSet &scaleSet)
	Scale the ModelComponent. More...
void	extendFinalizeFromProperties () override
Protected Member Functions inherited from OpenSim::Component
const Component &	get_components (int i) const
	Get the value of the i-th element of the components property. More...
Component &	upd_components (int i)
	Get a writable reference to the i-th element of the components property. More...
void	set_components (int i, const Component &value)
	Set the value of the i-th element of components property. More...
int	append_components (const Component &value)
	Append an element to the components property. More...
Protected Member Functions inherited from OpenSim::Object
	Object ()
	The default constructor is only for use by constructors of derived types. More...
	Object (const std::string &fileName, bool aUpdateFromXMLNode=true)
	Constructor from a file, to be called from other constructors that take a file as input. More...
	Object (const Object &source)
	Copy constructor is invoked automatically by derived classes with default copy constructors; otherwise it must be invoked explicitly. More...
	Object (SimTK::Xml::Element &aElement)
	Construct the base class portion of an Object from a given Xml element that describes this Object. More...
template<class T >
PropertyIndex	addProperty (const std::string &name, const std::string &comment, const T &value)
	Define a new single-value property of known type T, with the given name, associated comment, and initial value. More...
template<class T >
PropertyIndex	addOptionalProperty (const std::string &name, const std::string &comment)
	Add an optional property, meaning it can contain either no value or a single value. More...
template<class T >
PropertyIndex	addOptionalProperty (const std::string &name, const std::string &comment, const T &value)
	Add an optional property, meaning it can contain either no value or a single value. More...
template<class T >
PropertyIndex	addListProperty (const std::string &name, const std::string &comment, int minSize, int maxSize)
	Define a new list-valued property of known type T, with the given name, associated comment, minimum (==0) and maximum (>0) allowable list lengths, and a zero-length initial value. More...
template<class T , template< class > class Container>
PropertyIndex	addListProperty (const std::string &name, const std::string &comment, int minSize, int maxSize, const Container< T > &valueList)
	Define a new list-valued property as above, but assigning an initial value via some templatized container class that supports size() and indexing. More...
PropertyIndex	getPropertyIndex (const std::string &name) const
	Look up a property by name and return its PropertyIndex if it is found. More...
template<class T >
PropertyIndex	getPropertyIndex () const
	Look up an unnamed property by the type of object it contains, and return its PropertyIndex if it is found. More...
template<class T >
void	checkPropertyValueIsPositive (const Property< T > &p) const
	Throw an exception if any of the property's values are not positive. More...
template<class T >
void	checkPropertyValueIsInSet (const Property< T > &p, const std::set< T > &set) const
	Throw an exception if any of the property's values are not in the provided set. More...
template<class T >
void	checkPropertyValueIsInRangeOrSet (const Property< T > &p, const T &lower, const T &upper, const std::set< T > &set) const
	Throw an exception if any of the property's values are neither in the provided range nor in the provided set. More...
void	setObjectIsUpToDateWithProperties ()
	When an object is initialized using the current values of its properties, it can set a flag indicating that it is up to date. More...
void	clearObjectIsUpToDateWithProperties ()
	For testing or debugging purposes, manually clear the "object is up to date with respect to properties" flag. More...
void	makeObjectNamesConsistentWithProperties ()
	Make sure the name of an object is consistent with its property type. More...
void	updateFromXMLDocument ()
	Use this method only if you're deserializing from a file and the object is at the top level; that is, primarily in constructors that take a file name as input. More...
void	setDocument (XMLDocument *)
	Unconditionally set the XMLDocument associated with this object. More...
const XMLDocument *	getDocument () const
	Get a const pointer to the document (if any) associated with this object. More...
XMLDocument *	updDocument ()
	Get a writable pointer to the document (if any) associated with this object. More...

Auto-generated functions
static Millard2012AccelerationMuscle *	safeDownCast (OpenSim::Object *obj)
	For use in MATLAB and Python to access the concrete class. More...
static const std::string &	getClassName ()
	This returns "Millard2012AccelerationMuscle". More...
void	assign (Object &aObject) override
	This allows copy assignment in the Java GUI. More...
Millard2012AccelerationMuscle *	clone () const override
	Create a new heap-allocated copy of the concrete object to which this Object refers. More...
const std::string &	getConcreteClassName () const override
	Returns the class name of the concrete Object-derived class of the actual object referenced by this Object, as a string. More...

Additional Inherited Members
Static Public Member Functions inherited from OpenSim::Muscle
static Muscle *	safeDownCast (OpenSim::Object *obj)
	For use in MATLAB and Python to access the concrete class. More...
static const std::string &	getClassName ()
	This returns "Muscle". More...
Static Public Member Functions inherited from OpenSim::PathActuator
static PathActuator *	safeDownCast (OpenSim::Object *obj)
	For use in MATLAB and Python to access the concrete class. More...
static const std::string &	getClassName ()
	This returns "PathActuator". More...
Static Public Member Functions inherited from OpenSim::ScalarActuator
static ScalarActuator *	safeDownCast (OpenSim::Object *obj)
	For use in MATLAB and Python to access the concrete class. More...
static const std::string &	getClassName ()
	This returns "ScalarActuator". More...
Static Public Member Functions inherited from OpenSim::Actuator
static Actuator *	safeDownCast (OpenSim::Object *obj)
	For use in MATLAB and Python to access the concrete class. More...
static const std::string &	getClassName ()
	This returns "Actuator". More...
Static Public Member Functions inherited from OpenSim::Force
static Force *	safeDownCast (OpenSim::Object *obj)
	For use in MATLAB and Python to access the concrete class. More...
static const std::string &	getClassName ()
	This returns "Force". More...
Static Public Member Functions inherited from OpenSim::ModelComponent
static ModelComponent *	safeDownCast (OpenSim::Object *obj)
	For use in MATLAB and Python to access the concrete class. More...
static const std::string &	getClassName ()
	This returns "ModelComponent". More...
Static Public Member Functions inherited from OpenSim::Component
static Component *	safeDownCast (OpenSim::Object *obj)
	For use in MATLAB and Python to access the concrete class. More...
static const std::string &	getClassName ()
	This returns "Component". More...
Static Public Member Functions inherited from OpenSim::Object
static void	registerType (const Object &defaultObject)
	Register an instance of a class; if the class is already registered it will be replaced. More...
static void	renameType (const std::string &oldTypeName, const std::string &newTypeName)
	Support versioning by associating the current Object type with an old name. More...
static const Object *	getDefaultInstanceOfType (const std::string &concreteClassName)
	Return a pointer to the default instance of the registered (concrete) Object whose class name is given, or NULL if the type is not registered. More...
template<class T >
static bool	isObjectTypeDerivedFrom (const std::string &concreteClassName)
	Return true if the given concrete object type represents a subclass of the template object type T, and thus could be referenced with a T*. More...
static Object *	newInstanceOfType (const std::string &concreteClassName)
	Create a new instance of the concrete Object type whose class name is given as concreteClassName. More...
static void	getRegisteredTypenames (Array< std::string > &typeNames)
	Retrieve all the typenames registered so far. More...
template<class T >
static void	getRegisteredObjectsOfGivenType (ArrayPtrs< T > &rArray)
	Return an array of pointers to the default instances of all registered (concrete) Object types that derive from a given Object-derived type that does not have to be concrete. More...
static bool	PrintPropertyInfo (std::ostream &os, const std::string &classNameDotPropertyName, bool printFlagInfo=true)
	Dump formatted property information to a given output stream, useful for creating a "help" facility for registered objects. More...
static bool	PrintPropertyInfo (std::ostream &os, const std::string &className, const std::string &propertyName, bool printFlagInfo=true)
	Same as the other signature but the class name and property name are provided as two separate strings. More...
static Object *	makeObjectFromFile (const std::string &fileName)
	Create an OpenSim object whose type is based on the tag at the root node of the XML file passed in. More...
static const std::string &	getClassName ()
	Return the name of this class as a string; i.e., "Object". More...
static void	setSerializeAllDefaults (bool shouldSerializeDefaults)
	Static function to control whether all registered objects and their properties are written to the defaults section of output files rather than only those values for which the default was explicitly overwritten when read in from an input file or set programmatically. More...
static bool	getSerializeAllDefaults ()
	Report the value of the "serialize all defaults" flag. More...
static bool	isKindOf (const char *type)
	Returns true if the passed-in string is "Object"; each Object-derived class defines a method of this name for its own class name. More...
static void	setDebugLevel (int newLevel)
	Set the amount of logging output. More...
static int	getDebugLevel ()
	Get the current setting of debug level. More...
static Object *	SafeCopy (const Object *aObject)
	Use the clone() method to duplicate the given object unless the pointer is null in which case null is returned. More...
static void	RegisterType (const Object &defaultObject)
	OBSOLETE alternate name for registerType(). More...
static void	RenameType (const std::string &oldName, const std::string &newName)
	OBSOLETE alternate name for renameType(). More...
Static Public Attributes inherited from OpenSim::Object
static const std::string	DEFAULT_NAME
	Name used for default objects when they are serialized. More...
Protected Attributes inherited from OpenSim::Muscle
double	_muscleWidth
	The assumed fixed muscle-width from which the fiber pennation angle can be calculated. More...
double	_maxIsometricForce
	to support deprecated muscles More...
double	_optimalFiberLength
double	_pennationAngleAtOptimal
double	_tendonSlackLength
CacheVariable< Muscle::MuscleLengthInfo >	_lengthInfoCV
CacheVariable< Muscle::FiberVelocityInfo >	_velInfoCV
CacheVariable< Muscle::MuscleDynamicsInfo >	_dynamicsInfoCV
CacheVariable< Muscle::MusclePotentialEnergyInfo >	_potentialEnergyInfoCV
Protected Attributes inherited from OpenSim::Actuator
int	_controlIndex
Protected Attributes inherited from OpenSim::Force
SimTK::ResetOnCopy< SimTK::ForceIndex >	_index
	ID for the force in Simbody. More...
Protected Attributes inherited from OpenSim::ModelComponent
SimTK::ReferencePtr< Model >	_model
	The model this component belongs to. More...
Protected Attributes inherited from OpenSim::Object
PropertySet	_propertySet
	OBSOLETE: Property_Deprecated set for serializable member variables of this and derived classes. More...
Static Protected Attributes inherited from OpenSim::ModelComponent
static const SimTK::Vec3	InvalidScaleFactors
	Returned by getScaleFactors() if the ScaleSet does not contain scale factors for the base Body associated with the specified Frame. More...
Related Functions inherited from OpenSim::Object
#define	OpenSim_DECLARE_CONCRETE_OBJECT(ConcreteClass, SuperClass)
	Macro to be included as the first line of the class declaration for any non-templatized, concrete class that derives from OpenSim::Object. More...
#define	OpenSim_DECLARE_ABSTRACT_OBJECT(ConcreteClass, SuperClass)
	Macro to be included as the first line of the class declaration for any still-abstract class that derives from OpenSim::Object. More...
#define	OpenSim_DECLARE_CONCRETE_OBJECT_T(ConcreteClass, TArg, SuperClass)
	Macro to be included as the first line of the class declaration for any templatized, concrete class that derives from OpenSim::Object, like Set<T>. More...
#define	OpenSim_DECLARE_ABSTRACT_OBJECT_T(ConcreteClass, TArg, SuperClass)
	Macro to be included as the first line of the class declaration for any templatized, still-abstract class that derives from OpenSim::Object. More...

Detailed Description

This class implements a 3 state (activation,fiber length and fiber velocity) acceleration musculo-tendon model that has several advantages over equilibrium musculo-tendon models: it is possible to simulate 0 activation, it requires fewer integrator steps to simulate, and physiological active force-length (with a minimum value of 0) and force velocity (with true asymptotes at the maximum shortening and lengthening velocities) curves can be employed.

The dynamic equation of the mass, constrained to move in direction \( \hat{i} \) is given by the scalar equation:

\[ m \ddot{x} = F_{SE} - F_{CE} \cdot \hat{i} \]

The kinematic expression for the acceleration of the mass, \( \ddot{s} \), expressed in terms of the fiber length, \(l_{CE}\), and pennation angle \(\phi\) is

\[ \ddot{x} = \Big(\ddot{l}_{CE} \cos \phi - 2 \dot{l}_{CE}\dot{\phi}\sin\phi - \dot{\phi}^2 l_{CE} \cos \phi - \ddot{\phi} l_{CE} \sin \phi\Big) \]

The kinematic expression for the angular acceleration of the pennation angle can be found by taking the second derivative of the pennation constraint equation

\[ l_{CE} \sin \phi = h \]

which yields

\[ \ddot{\phi} = -\Big( \ddot{l}_{CE}\sin\phi + 2 \dot{l}_{CE} \dot{\phi} \cos\phi - \dot{\phi}^2 l_{CE} \sin \phi \Big) / \Big( l_{CE} \cos \phi \Big) \]

An expression for \( \ddot{l}_{CE}\) can be obtained by substituting in the equations \( \ddot{\phi} \) into the equation for \(\ddot{x}\) and simplifying:

\[ \ddot{l}_{CE} = \frac{1}{m} \Big( F_{SE} - F_{CE} \cdot \hat{i} \Big) \cos \phi + l_{CE} \dot{\phi}^2 \]

Notice that the above equation for \(\ddot{l}_{CE}\) has no singularities, provided that there are no singularities in \( F_{SE}\) and \( F_{M}\cdot\hat{i}\). The force the fiber applies to the tendon (in N), \(F_{CE}\cdot\hat{i}\), is given by (+'ve is tension)

\[ F_{CE} \cdot \hat{i} = f_{ISO}\Big(\mathbf{a} \mathbf{f}_L(\hat{l}_{CE}) \mathbf{f}_V(\frac{\hat{v}_{CE}}{v_{MAX}}) + \beta_{CE}\hat{v}_{CE} + \mathbf{f}_{PE}(\hat{l}_{CE})(1+\beta_{PE}\hat{v}_{CE}) - \mathbf{f}_K(\hat{l}_{CE})(1-\beta_{K}\hat{v}_{CE}) \Big) \cos \phi - f_{ISO} \Big( \mathbf{f}_{c\phi}(\cos \phi) (1- \beta_{c \phi} \frac{d}{dt}(\frac{l_{CE}\cos\phi}{l_{CE,OPT}\cos\phi_{OPT}})) \Big) \]

The force the tendon generates (in N) is given by (+'ve is tension)

\[ F_{SE} = f_{ISO} \mathbf{f}_{SE}(\hat{l}_{SE})(1+\beta_{SE}\hat{v}_{SE}) \]

Every elastic element ( \(\mathbf{f}_{PE}\), \(\mathbf{f}_{K}\), \(\mathbf{f}_{c\phi}\), and \(\mathbf{f}_{SE}\)) is accompanied by a non-linear damping element of a form that is identical to the damping found in a Hunt-Crossley contact model. Additionally a linear damping element, \(\beta_{CE}\hat{v}_{CE}\), is located in the fiber as in J.He et al. Damping is necessary to include in this model to prevent the mass from oscillating in a non-physiologic manner. Nonlinear damping Hunt-Crossley damping (where the damping force is scaled by the elastic force) has been chosen because this form of damping doesn't increase the stiffness of the system equations (because it is gradually turned on).

As with the Hunt-Crossley contact model, the force generated by the nonlinear spring and damper saturated so that it is greater than or equal to zero. This saturation is necessary to ensure that tension elements can only generate tensile forces, and that compressive elements only generate compressive forces. Note that the sign conventions have been chosen so that damping forces are generated in the correct direction for each element.

\begin{eqnarray*} (1+\beta_{PE}\hat{v}_{CE}) > 0 \\ (1-\beta_{K}\hat{v}_{CE}) > 0 \\ (1- \beta_{c \phi} \frac{d}{dt}(\frac{l_{CE}\cos\phi}{l_{CE,OPT}\cos\phi_{OPT}})) > 0 \\ (1+\beta_{SE}\hat{v}_{SE}) > 0 \end{eqnarray*}

For more information on these new terms please see the doxygen for FiberCompressiveForceLengthCurve, FiberCompressiveForceCosPennationCurve, and MuscleFirstOrderActivationDynamicModel.

Units

• m: meters
• rad: radians
• N: Newtons
• kg: kilograms
• s: seconds

Caution

The Millard2012AccelerationMuscle class is experimental and has not been extensively tested in all operational conditions.

Usage

Note that this object should be updated through the set methods provided. These set methods will take care of rebuilding the muscle correctly. If you modify the properties directly, the curve will not be rebuilt, and upon calling a function that requires a state an exception will be thrown because the muscle is out of date with its properties.

Note that this muscle does not currently implement the ignore_tendon_compliance flag, nor the ignore_activation_dynamics flag.

Nomenclature

Note that dot notation is used to denote time derivatives (units of \(m/s\) and \(m/s^2\) in this case), where as the hat symbol (as in \(\hat{l}\), \(\hat{v}\)) is used to denote time derivatives that have been scaled by a characteristic dimension (appear in units of \(1/s\) and \(1/s^2\) in this case)

• \(m\): is the mass located at the junction between the fiber and the tendon. This mass should be thought of as a time constant that indicates how quickly this model will converge to the force an equilibrium muscle-tendon model would produce ( \(kg\))
• \(\ddot{x}\): is the acceleration of the mass, in the \(\hat{i}\) direction ( \(m/s^2\))
• \(F_{SE}\): is the force developed by the tendon ( \(N\))
• \(F_{CE}\cdot\hat{i}\): is the force developed by the fiber along the tendon ( \(N\))

• \(l_{CE}\): Length of the fiber(m)
• \(l_{CE,OPT}\): Length the fiber generates maximal isometric force (m)
• \(\hat{l}_{CE}=l_{CE}/l_{CE,OPT}\): Normalized length of the fiber (dimensionless)
• \(\hat{v}_{CE}=\dot{l}_{CE}/l_{CE,OPT}\): Fiber velocity divided by ( \(1/s\))
• \(\hat{v}_{MAX}\): Maximum normalized fiber velocity ( \(l_{CE,OPT}/s\)). This quantity typically ranges between 10 and 15 lengths per second (1/s)

• \(\phi\): Pennation angle(rad)
• \(\phi_{OPT}\): Pennation angle when the fiber is at its optimal length (rad)

• \(l_{SE}\): Length of the series element (tendon) (m)
• \(l_{SE,R}\): Resting length of the series element(m)
• \(\hat{l}_{SE} = l_{SE}/l_{SE,R}\): Normalized length of the series element (dimensionless)
• \( \hat{v}_{SE} = \dot{l}_{SE}/l_{SE,R}\): Normalized velocity of the tendon (1/s)

• \(f_{ISO}\): maximum force the muscle can develop statically ( \(\hat{v}_{CE}=0\)) at its optimal length ( \(l_{CE,OPT}\)) and pennation angle ( \(\phi_{OPT}\))

• \(\mathbf{a}\): activation (unitless)
• \(\mathbf{f}_L(\hat{l}_{CE})\): Active force length multiplier (dimensionless)
• \(\mathbf{f}_V(\frac{\hat{v}_{CE}}{v_{MAX}})\): Force velocity multiplier (dimensionless)
• \(\mathbf{f}_{PE}(\hat{l}_{CE})\): Passive force length multiplier (dimensionless)
• \(\mathbf{f}_{K}(\hat{l}_{CE})\): Fiber compressive force length multiplier (dimensionless)
• \(\mathbf{f}_{c\phi}(\cos \phi)\): Fiber compressive cosine pennation multiplier (dimensionless)
• \(\mathbf{f}_{SE}(\hat{l}_{SE})\): Series element (tendon) force-length multiplier (dimensionless)

• \(\beta_{CE}\): Fiber damping (s)
• \(\beta_{PE}\): Fiber parallel element damping coefficient (s)
• \(\beta_{K}\): Fiber compressive force length damping coefficient (s)
• \(\beta_{c \phi}\): Fiber compressive cosine pennation damping coefficient (s)
• \(\beta_{SE}\): Series element (tendon) force length damping coefficient (s)

References

Hunt,K., and Crossley,F. Coefficient of restitution interpreted as damping in vibroimpact. Transactions of the ASME Journal of Applied Mechanics, 42(E):440445, 1975.

J.He, W.S. Levine, and G.E. Leob."The Modelling of the Neuro-musculo-skeletal Control System of A Cat Hindlimb", Proceedings of the IEEE International Symposium on Intelligent Control, 1988.

Author

Matt Millard

Member Typedef Documentation

Self

typedef Millard2012AccelerationMuscle OpenSim::Millard2012AccelerationMuscle::Self

This typedef might be useful within the member functions of this class.

This is generated by the OpenSim_DECLARE_*_OBJECT macros.

Super

typedef Muscle OpenSim::Millard2012AccelerationMuscle::Super

Use this typedef to refer to the superclass of this class.

Avoid using the explicit type name of the superclass; this would introduce bugs if the superclass is changed.

This is generated by the OpenSim_DECLARE_*_OBJECT macros.

Constructor & Destructor Documentation

Millard2012AccelerationMuscle() [1/2]

OpenSim::Millard2012AccelerationMuscle::Millard2012AccelerationMuscle

(

)

Default constructor: produces a non-functional empty muscle.

Millard2012AccelerationMuscle() [2/2]

OpenSim::Millard2012AccelerationMuscle::Millard2012AccelerationMuscle	(	const std::string &	aName,
		double	aMaxIsometricForce,
		double	aOptimalFiberLength,
		double	aTendonSlackLength,
		double	aPennationAngle
	)

Constructs a functional muscle using all of the default curves and activation model.

Parameters

aName	The name of the muscle.
aMaxIsometricForce	The force generated by the muscle when it at its optimal resting length, has a contraction velocity of zero, and is fully activated (Newtons).
aOptimalFiberLength	The optimal length of the muscle fiber (meters).
aTendonSlackLength	The resting length of the tendon (meters).
aPennationAngle	The angle of the fiber relative to the tendon when the fiber is at its optimal resting length (radians).

Member Function Documentation

assign()

void OpenSim::Millard2012AccelerationMuscle::assign ( Object &  aObject )

inlineoverride

This allows copy assignment in the Java GUI.

Exceptions

Exception

if the argument is not of type Millard2012AccelerationMuscle.

calcActivationRate()

double OpenSim::Millard2012AccelerationMuscle::calcActivationRate ( const SimTK::State &  s ) const

protected

Parameters

s	the state of the model

Returns

the time derivative of activation

calcFiberVelocityInfo()

void OpenSim::Millard2012AccelerationMuscle::calcFiberVelocityInfo ( const SimTK::State &  s, FiberVelocityInfo &  fvi  ) const

finaloverrideprotectedvirtual

calculate muscle's velocity related values such fiber and tendon velocities,normalized velocities, pennation angular velocity, etc...

Parameters

s	the state of the model
fvi	the fiber velocity info struct that will hold updated information about the muscle that is available at the velocity stage

Reimplemented from OpenSim::Muscle.

calcMuscleDynamicsInfo()

void OpenSim::Millard2012AccelerationMuscle::calcMuscleDynamicsInfo ( const SimTK::State &  s, MuscleDynamicsInfo &  mdi  ) const

finaloverrideprotectedvirtual

calculate muscle's active and passive force-length, force-velocity, tendon force, relationships and their related values

Parameters

s	the state of the model
mdi	the muscle dynamics info struct that will hold updated information about the muscle that is available at the dynamics stage

Reimplemented from OpenSim::Muscle.

calcMuscleLengthInfo()

void OpenSim::Millard2012AccelerationMuscle::calcMuscleLengthInfo ( const SimTK::State &  s, MuscleLengthInfo &  mli  ) const

finaloverrideprotectedvirtual

calculate muscle's position related values such fiber and tendon lengths, normalized lengths, pennation angle, etc...

Parameters

s	the state of the model
mli	the muscle length info struct that will hold updated information about the muscle that is available at the position stage

Reimplemented from OpenSim::Muscle.

calcMusclePotentialEnergyInfo()

void OpenSim::Millard2012AccelerationMuscle::calcMusclePotentialEnergyInfo ( const SimTK::State &  s, MusclePotentialEnergyInfo &  mpei  ) const

finaloverrideprotectedvirtual

calculate muscle's fiber and tendon potential energy

Reimplemented from OpenSim::Muscle.

clone()

Millard2012AccelerationMuscle* OpenSim::Millard2012AccelerationMuscle::clone ( ) const

inlineoverridevirtual

Create a new heap-allocated copy of the concrete object to which this Object refers.

It is up to the caller to delete the returned object when no longer needed. Every concrete object deriving from Object implements this pure virtual method automatically, via the declaration macro it invokes (e.g., OpenSim_DECLARE_CONCRETE_OBJECT()). Note that the concrete class overrides modify the return type to be a pointer to the concrete object; that still overrides the base class method because the return type is covariant with (that is, derives from) Object.

Implements OpenSim::Muscle.

computeActuation()

double OpenSim::Millard2012AccelerationMuscle::computeActuation ( const SimTK::State &  s ) const

finaloverridevirtual

Parameters

s	the state of the system

Returns

the tensile force the muscle is generating in N

Implements OpenSim::Muscle.

computeInitialFiberEquilibrium()

void OpenSim::Millard2012AccelerationMuscle::computeInitialFiberEquilibrium ( SimTK::State &  s ) const

finaloverridevirtual

This function computes the fiber length such that muscle fiber and tendon are developing the same force, and so that the velocity of the entire muscle-tendon is spread between the fiber and the tendon according to their relative compliances.

Parameters

s	the state of the system

Exceptions

MuscleCannotEquilibrate

Implements OpenSim::Muscle.

computeStateVariableDerivatives()

void OpenSim::Millard2012AccelerationMuscle::computeStateVariableDerivatives ( const SimTK::State &  s ) const

finaloverrideprotected

computes state variable derivatives

Parameters

s	the state of the model

extendAddToSystem()

void OpenSim::Millard2012AccelerationMuscle::extendAddToSystem ( SimTK::MultibodySystem &  system ) const

finaloverrideprotected

Creates the ModelComponent so that it can be used in simulation.

Parameters

system

the multibody system

extendInitStateFromProperties()

void OpenSim::Millard2012AccelerationMuscle::extendInitStateFromProperties ( SimTK::State &  s ) const

finaloverrideprotected

Initializes the state of the ModelComponent.

Parameters

s	the state of the model

extendPostScale()

void OpenSim::Millard2012AccelerationMuscle::extendPostScale ( const SimTK::State &  s, const ScaleSet &  scaleSet  )

overridevirtual

Adjust the properties of the muscle after the model has been scaled.

The optimal fiber length and tendon slack length are each multiplied by the ratio of the current path length and the path length before scaling.

Reimplemented from OpenSim::ModelComponent.

extendSetPropertiesFromState()

void OpenSim::Millard2012AccelerationMuscle::extendSetPropertiesFromState ( const SimTK::State &  s )

finaloverrideprotected

Sets the default state for ModelComponent.

Parameters

s	the state of the model

get_ActiveForceLengthCurve()

const ActiveForceLengthCurve& OpenSim::Millard2012AccelerationMuscle::get_ActiveForceLengthCurve ( ) const

inline

Get the value of the ActiveForceLengthCurve property.

get_default_activation()

const double& OpenSim::Millard2012AccelerationMuscle::get_default_activation ( ) const

inline

Get the value of the default_activation property.

get_default_fiber_length()

const double& OpenSim::Millard2012AccelerationMuscle::get_default_fiber_length ( ) const

inline

Get the value of the default_fiber_length property.

get_default_fiber_velocity()

const double& OpenSim::Millard2012AccelerationMuscle::get_default_fiber_velocity ( ) const

inline

Get the value of the default_fiber_velocity property.

get_fiber_compressive_force_cos_pennation_damping()

const double& OpenSim::Millard2012AccelerationMuscle::get_fiber_compressive_force_cos_pennation_damping ( ) const

inline

Get the value of the fiber_compressive_force_cos_pennation_damping property.

get_fiber_compressive_force_length_damping()

const double& OpenSim::Millard2012AccelerationMuscle::get_fiber_compressive_force_length_damping ( ) const

inline

Get the value of the fiber_compressive_force_length_damping property.

get_fiber_damping()

const double& OpenSim::Millard2012AccelerationMuscle::get_fiber_damping ( ) const

inline

Get the value of the fiber_damping property.

get_fiber_force_length_damping()

const double& OpenSim::Millard2012AccelerationMuscle::get_fiber_force_length_damping ( ) const

inline

Get the value of the fiber_force_length_damping property.

get_FiberCompressiveForceCosPennationCurve()

const FiberCompressiveForceCosPennationCurve& OpenSim::Millard2012AccelerationMuscle::get_FiberCompressiveForceCosPennationCurve ( ) const

inline

Get the value of the FiberCompressiveForceCosPennationCurve property.

get_FiberCompressiveForceLengthCurve()

const FiberCompressiveForceLengthCurve& OpenSim::Millard2012AccelerationMuscle::get_FiberCompressiveForceLengthCurve ( ) const

inline

Get the value of the FiberCompressiveForceLengthCurve property.

get_FiberForceLengthCurve()

const FiberForceLengthCurve& OpenSim::Millard2012AccelerationMuscle::get_FiberForceLengthCurve ( ) const

inline

Get the value of the FiberForceLengthCurve property.

get_ForceVelocityCurve()

const ForceVelocityCurve& OpenSim::Millard2012AccelerationMuscle::get_ForceVelocityCurve ( ) const

inline

Get the value of the ForceVelocityCurve property.

get_mass()

const double& OpenSim::Millard2012AccelerationMuscle::get_mass ( ) const

inline

Get the value of the mass property.

get_MuscleFirstOrderActivationDynamicModel()

const MuscleFirstOrderActivationDynamicModel& OpenSim::Millard2012AccelerationMuscle::get_MuscleFirstOrderActivationDynamicModel ( ) const

inline

Get the value of the MuscleFirstOrderActivationDynamicModel property.

get_tendon_force_length_damping()

const double& OpenSim::Millard2012AccelerationMuscle::get_tendon_force_length_damping ( ) const

inline

Get the value of the tendon_force_length_damping property.

get_TendonForceLengthCurve()

const TendonForceLengthCurve& OpenSim::Millard2012AccelerationMuscle::get_TendonForceLengthCurve ( ) const

inline

Get the value of the TendonForceLengthCurve property.

getActivationModel()

const MuscleFirstOrderActivationDynamicModel& OpenSim::Millard2012AccelerationMuscle::getActivationModel

(

)

const

Returns

the MuscleFirstOrderActivationDynamicModel that this muscle model uses

getActivationRate()

double OpenSim::Millard2012AccelerationMuscle::getActivationRate

(

const SimTK::State &

s

)

const

Parameters

s	The state of the system

Returns

the time derivative of activation

getActiveForceLengthCurve()

const ActiveForceLengthCurve& OpenSim::Millard2012AccelerationMuscle::getActiveForceLengthCurve

(

)

const

Returns

the ActiveForceLengthCurve that this muscle model uses

getClassName()

static const std::string& OpenSim::Millard2012AccelerationMuscle::getClassName ( )

inlinestatic

This returns "Millard2012AccelerationMuscle".

See getConcreteClassName() if you want the class name of the underlying concrete object instead.

This is generated by the OpenSim_DECLARE_*_OBJECT macros.

getConcreteClassName()

const std::string& OpenSim::Millard2012AccelerationMuscle::getConcreteClassName ( ) const

inlineoverridevirtual

Returns the class name of the concrete Object-derived class of the actual object referenced by this Object, as a string.

This is the string that is used as the tag for this concrete object in an XML file. Every concrete class derived from Object automatically overrides this method via the declaration macro it uses. See getClassName() to get the class name of the referencing (possibly abstract) class rather than the concrete object.

See also

getClassName()

Implements OpenSim::Muscle.

getDefaultActivation()

double OpenSim::Millard2012AccelerationMuscle::getDefaultActivation

(

)

const

Returns

the default activation level that is used as an initial condition if none is provided by the user.

getDefaultFiberLength()

double OpenSim::Millard2012AccelerationMuscle::getDefaultFiberLength

(

)

const

Returns

the default fiber length that is used as an initial condition if none is provided by the user.

getDefaultFiberVelocity()

double OpenSim::Millard2012AccelerationMuscle::getDefaultFiberVelocity

(

)

const

Returns

the default fiber velocity that is used as an initial condition if none is provided by the user.

getFiberAcceleration()

double OpenSim::Millard2012AccelerationMuscle::getFiberAcceleration

(

const SimTK::State &

s

)

const

Parameters

s	The state of the system

Returns

the acceleration of the fiber (m/s)

getFiberCompressiveForceCosPennationCurve()

const FiberCompressiveForceCosPennationCurve& OpenSim::Millard2012AccelerationMuscle::getFiberCompressiveForceCosPennationCurve

(

)

const

Returns

the FiberCompressiveForceCosPennationCurve that this muscle model uses.

getFiberCompressiveForceCosPennationMultiplier()

double OpenSim::Millard2012AccelerationMuscle::getFiberCompressiveForceCosPennationMultiplier

(

SimTK::State &

s

)

const

Parameters

s	the state of the system

Returns

the normalized force term associated with the compressive force cosine pennation element, \(\mathbf{f}_{c\phi}(\cos \phi)\), in the equilibrium equation

getFiberCompressiveForceLengthCurve()

const FiberCompressiveForceLengthCurve& OpenSim::Millard2012AccelerationMuscle::getFiberCompressiveForceLengthCurve

(

)

const

Returns

the FiberCompressiveForceLengthCurve that this muscle model uses

getFiberCompressiveForceLengthMultiplier()

double OpenSim::Millard2012AccelerationMuscle::getFiberCompressiveForceLengthMultiplier

(

SimTK::State &

s

)

const

Parameters

s	the state of the system

Returns

the normalized force term associated with the compressive force length element, \(\mathbf{f}_K(\hat{l}_{CE})\), in the equilibrium equation

getFiberForceLengthCurve()

const FiberForceLengthCurve& OpenSim::Millard2012AccelerationMuscle::getFiberForceLengthCurve

(

)

const

Returns

the FiberForceLengthCurve that this muscle model uses

getFiberStiffnessAlongTendon()

double OpenSim::Millard2012AccelerationMuscle::getFiberStiffnessAlongTendon

(

const SimTK::State &

s

)

const

Returns

the stiffness of the muscle fibers along the tendon (N/m)

getFiberVelocity()

double OpenSim::Millard2012AccelerationMuscle::getFiberVelocity

(

const SimTK::State &

s

)

const

Parameters

s	The state of the system

Returns

the velocity of the fiber (m/s)

getForceVelocityCurve()

const ForceVelocityCurve& OpenSim::Millard2012AccelerationMuscle::getForceVelocityCurve

(

)

const

Returns

the ForceVelocityInverseCurve that this muscle model uses

getMass()

double OpenSim::Millard2012AccelerationMuscle::getMass

(

)

const

Returns

the size of the mass between the tendon and fiber

getPennationModel()

const MuscleFixedWidthPennationModel& OpenSim::Millard2012AccelerationMuscle::getPennationModel

(

)

const

Returns

the MuscleFixedWidthPennationModel that this muscle model uses

getStateVariableDeriv()

double OpenSim::Millard2012AccelerationMuscle::getStateVariableDeriv ( const SimTK::State &  s, const std::string &  aStateName  ) const

protected

Get the derivative of an actuator state, by index.

Parameters

s	the state
aStateName	the name of the state to get.

Returns

The value of the state derivative

getTendonForceLengthCurve()

const TendonForceLengthCurve& OpenSim::Millard2012AccelerationMuscle::getTendonForceLengthCurve

(

)

const

Returns

the TendonForceLengthCurve that this muscle model uses

getTendonForceMultiplier()

double OpenSim::Millard2012AccelerationMuscle::getTendonForceMultiplier

(

SimTK::State &

s

)

const

Parameters

s	the state of the system

Returns

the normalized force term associated with tendon element, \(\mathbf{f}_{SE}(\hat{l}_{T})\), in the equilibrium equation

safeDownCast()

static Millard2012AccelerationMuscle* OpenSim::Millard2012AccelerationMuscle::safeDownCast ( OpenSim::Object *  obj )

inlinestatic

For use in MATLAB and Python to access the concrete class.

Example: cObj = Millard2012AccelerationMuscle.safeDownCast(obj). This is equivalent to dynamic_cast<Millard2012AccelerationMuscle*>(obj) in C++.

set_ActiveForceLengthCurve()

void OpenSim::Millard2012AccelerationMuscle::set_ActiveForceLengthCurve ( const ActiveForceLengthCurve &  value )

inline

Set the value of the ActiveForceLengthCurve property.

set_default_activation()

void OpenSim::Millard2012AccelerationMuscle::set_default_activation ( const double &  value )

inline

Set the value of the default_activation property.

set_default_fiber_length()

void OpenSim::Millard2012AccelerationMuscle::set_default_fiber_length ( const double &  value )

inline

Set the value of the default_fiber_length property.

set_default_fiber_velocity()

void OpenSim::Millard2012AccelerationMuscle::set_default_fiber_velocity ( const double &  value )

inline

Set the value of the default_fiber_velocity property.

set_fiber_compressive_force_cos_pennation_damping()

void OpenSim::Millard2012AccelerationMuscle::set_fiber_compressive_force_cos_pennation_damping ( const double &  value )

inline

Set the value of the fiber_compressive_force_cos_pennation_damping property.

set_fiber_compressive_force_length_damping()

void OpenSim::Millard2012AccelerationMuscle::set_fiber_compressive_force_length_damping ( const double &  value )

inline

Set the value of the fiber_compressive_force_length_damping property.

set_fiber_damping()

void OpenSim::Millard2012AccelerationMuscle::set_fiber_damping ( const double &  value )

inline

Set the value of the fiber_damping property.

set_fiber_force_length_damping()

void OpenSim::Millard2012AccelerationMuscle::set_fiber_force_length_damping ( const double &  value )

inline

Set the value of the fiber_force_length_damping property.

set_FiberCompressiveForceCosPennationCurve()

void OpenSim::Millard2012AccelerationMuscle::set_FiberCompressiveForceCosPennationCurve ( const FiberCompressiveForceCosPennationCurve &  value )

inline

Set the value of the FiberCompressiveForceCosPennationCurve property.

set_FiberCompressiveForceLengthCurve()

void OpenSim::Millard2012AccelerationMuscle::set_FiberCompressiveForceLengthCurve ( const FiberCompressiveForceLengthCurve &  value )

inline

Set the value of the FiberCompressiveForceLengthCurve property.

set_FiberForceLengthCurve()

void OpenSim::Millard2012AccelerationMuscle::set_FiberForceLengthCurve ( const FiberForceLengthCurve &  value )

inline

Set the value of the FiberForceLengthCurve property.

set_ForceVelocityCurve()

void OpenSim::Millard2012AccelerationMuscle::set_ForceVelocityCurve ( const ForceVelocityCurve &  value )

inline

Set the value of the ForceVelocityCurve property.

set_mass()

void OpenSim::Millard2012AccelerationMuscle::set_mass ( const double &  value )

inline

Set the value of the mass property.

set_MuscleFirstOrderActivationDynamicModel()

void OpenSim::Millard2012AccelerationMuscle::set_MuscleFirstOrderActivationDynamicModel ( const MuscleFirstOrderActivationDynamicModel &  value )

inline

Set the value of the MuscleFirstOrderActivationDynamicModel property.

set_tendon_force_length_damping()

void OpenSim::Millard2012AccelerationMuscle::set_tendon_force_length_damping ( const double &  value )

inline

Set the value of the tendon_force_length_damping property.

set_TendonForceLengthCurve()

void OpenSim::Millard2012AccelerationMuscle::set_TendonForceLengthCurve ( const TendonForceLengthCurve &  value )

inline

Set the value of the TendonForceLengthCurve property.

setActivation()

void OpenSim::Millard2012AccelerationMuscle::setActivation ( SimTK::State &  s, double  activation  ) const

overridevirtual

Parameters

s	the state of the system
activation	the desired activation level

Implements OpenSim::Muscle.

setActivationModel()

void OpenSim::Millard2012AccelerationMuscle::setActivationModel

(

MuscleFirstOrderActivationDynamicModel &

aActivationMdl

)

Parameters

aActivationMdl

the MuscleFirstOrderActivationDynamicModel that this muscle model uses to simulate activation dynamics

setActiveForceLengthCurve()

void OpenSim::Millard2012AccelerationMuscle::setActiveForceLengthCurve

(

ActiveForceLengthCurve &

aActiveForceLengthCurve

)

Parameters

aActiveForceLengthCurve

the ActiveForceLengthCurve that this muscle model uses to scale active fiber force as a function of length

setDefaultActivation()

void OpenSim::Millard2012AccelerationMuscle::setDefaultActivation

(

double

activation

)

Parameters

activation

the default activation level that is used to initialize the muscle

setDefaultFiberLength()

void OpenSim::Millard2012AccelerationMuscle::setDefaultFiberLength

(

double

fiberLength

)

Parameters

fiberLength

the default fiber length that is used to initialize the muscle

setDefaultFiberVelocity()

void OpenSim::Millard2012AccelerationMuscle::setDefaultFiberVelocity

(

double

fiberVelocity

)

Parameters

fiberVelocity

the default fiber velocity that is used to initialize the muscle

setFiberCompressiveForceCosPennationCurve()

void OpenSim::Millard2012AccelerationMuscle::setFiberCompressiveForceCosPennationCurve

(

FiberCompressiveForceCosPennationCurve &

aFiberCompressiveForceCosPennationCurve

)

Parameters

aFiberCompressiveForceCosPennationCurve

the FiberCompressiveForceCosPennationCurve that this muscle model uses to prevent pennation angles from approaching 90 degrees, which is associated with a singularity in this model.

setFiberCompressiveForceLengthCurve()

void OpenSim::Millard2012AccelerationMuscle::setFiberCompressiveForceLengthCurve

(

FiberCompressiveForceLengthCurve &

aFiberCompressiveForceLengthCurve

)

Parameters

aFiberCompressiveForceLengthCurve

the FiberCompressiveForceLengthCurve that this muscle model uses to ensure the length of the fiber is always greater than a physically realistic lower bound.

setFiberForceLengthCurve()

void OpenSim::Millard2012AccelerationMuscle::setFiberForceLengthCurve

(

FiberForceLengthCurve &

aFiberForceLengthCurve

)

Parameters

aFiberForceLengthCurve

the FiberForceLengthCurve that this muscle model uses to calculate the passive force the muscle fiber generates as the length of the fiber changes

setFiberLength()

void OpenSim::Millard2012AccelerationMuscle::setFiberLength	(	SimTK::State &	s,
		double	fiberLength
	)		const

Parameters

s	the state of the system
fiberLength	the desired fiber length (m)

setFiberVelocity()

void OpenSim::Millard2012AccelerationMuscle::setFiberVelocity	(	SimTK::State &	s,
		double	fiberVelocity
	)		const

Parameters

s	the state of the system
fiberVelocity	the desired fiber velocity (m/s)

setForceVelocityCurve()

void OpenSim::Millard2012AccelerationMuscle::setForceVelocityCurve

(

ForceVelocityCurve &

aForceVelocityCurve

)

Parameters

aForceVelocityCurve

the ForceVelocityCurve that this muscle model uses to calculate the derivative of fiber length.

setMass()

void OpenSim::Millard2012AccelerationMuscle::setMass

(

double

mass

)

Parameters

mass	The size of the mass parameter between the fiber and the tendon. Making this parameter small will make the muscle model more rapidly converge to the results an equilibrium model would produce.

Conditions

    mass >= 0.001

setStateVariableDeriv()

void OpenSim::Millard2012AccelerationMuscle::setStateVariableDeriv ( const SimTK::State &  s, const std::string &  aStateName, double  aValue  ) const

protected

Set the derivative of an actuator state, specified by name

Parameters

s	the state
aStateName	The name of the state to set.
aValue	The value to set the state to.

setTendonForceLengthCurve()

void OpenSim::Millard2012AccelerationMuscle::setTendonForceLengthCurve

(

TendonForceLengthCurve &

aTendonForceLengthCurve

)

Parameters

aTendonForceLengthCurve

the TendonForceLengthCurve that this muscle model uses to define the tendon force length curve

upd_ActiveForceLengthCurve()

ActiveForceLengthCurve& OpenSim::Millard2012AccelerationMuscle::upd_ActiveForceLengthCurve ( )

inline

Get a writable reference to the ActiveForceLengthCurve property.

upd_default_activation()

double& OpenSim::Millard2012AccelerationMuscle::upd_default_activation ( )

inline

Get a writable reference to the default_activation property.

upd_default_fiber_length()

double& OpenSim::Millard2012AccelerationMuscle::upd_default_fiber_length ( )

inline

Get a writable reference to the default_fiber_length property.

upd_default_fiber_velocity()

double& OpenSim::Millard2012AccelerationMuscle::upd_default_fiber_velocity ( )

inline

Get a writable reference to the default_fiber_velocity property.

upd_fiber_compressive_force_cos_pennation_damping()

double& OpenSim::Millard2012AccelerationMuscle::upd_fiber_compressive_force_cos_pennation_damping ( )

inline

Get a writable reference to the fiber_compressive_force_cos_pennation_damping property.

upd_fiber_compressive_force_length_damping()

double& OpenSim::Millard2012AccelerationMuscle::upd_fiber_compressive_force_length_damping ( )

inline

Get a writable reference to the fiber_compressive_force_length_damping property.

upd_fiber_damping()

double& OpenSim::Millard2012AccelerationMuscle::upd_fiber_damping ( )

inline

Get a writable reference to the fiber_damping property.

upd_fiber_force_length_damping()

double& OpenSim::Millard2012AccelerationMuscle::upd_fiber_force_length_damping ( )

inline

Get a writable reference to the fiber_force_length_damping property.

upd_FiberCompressiveForceCosPennationCurve()

FiberCompressiveForceCosPennationCurve& OpenSim::Millard2012AccelerationMuscle::upd_FiberCompressiveForceCosPennationCurve ( )

inline

Get a writable reference to the FiberCompressiveForceCosPennationCurve property.

upd_FiberCompressiveForceLengthCurve()

FiberCompressiveForceLengthCurve& OpenSim::Millard2012AccelerationMuscle::upd_FiberCompressiveForceLengthCurve ( )

inline

Get a writable reference to the FiberCompressiveForceLengthCurve property.

upd_FiberForceLengthCurve()

FiberForceLengthCurve& OpenSim::Millard2012AccelerationMuscle::upd_FiberForceLengthCurve ( )

inline

Get a writable reference to the FiberForceLengthCurve property.

upd_ForceVelocityCurve()

ForceVelocityCurve& OpenSim::Millard2012AccelerationMuscle::upd_ForceVelocityCurve ( )

inline

Get a writable reference to the ForceVelocityCurve property.

upd_mass()

double& OpenSim::Millard2012AccelerationMuscle::upd_mass ( )

inline

Get a writable reference to the mass property.

upd_MuscleFirstOrderActivationDynamicModel()

MuscleFirstOrderActivationDynamicModel& OpenSim::Millard2012AccelerationMuscle::upd_MuscleFirstOrderActivationDynamicModel ( )

inline

Get a writable reference to the MuscleFirstOrderActivationDynamicModel property.

upd_tendon_force_length_damping()

double& OpenSim::Millard2012AccelerationMuscle::upd_tendon_force_length_damping ( )

inline

Get a writable reference to the tendon_force_length_damping property.

upd_TendonForceLengthCurve()

TendonForceLengthCurve& OpenSim::Millard2012AccelerationMuscle::upd_TendonForceLengthCurve ( )

inline

Get a writable reference to the TendonForceLengthCurve property.

OpenSim Property, Socket, Output, Input Documentation

ActiveForceLengthCurve

ActiveForceLengthCurve OpenSim::Millard2012AccelerationMuscle::ActiveForceLengthCurve

"active force length curve"

This property appears in XML files under the tag <ActiveForceLengthCurve>. This property was generated with the OpenSim_DECLARE_UNNAMED_PROPERTY macro; see Property to learn about the property system.

See also

get_ActiveForceLengthCurve(), upd_ActiveForceLengthCurve(), set_ActiveForceLengthCurve()

default_activation

double OpenSim::Millard2012AccelerationMuscle::default_activation

"assumed initial activation level if none is assigned."

This property appears in XML files under the tag <default_activation>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

See also

get_default_activation(), upd_default_activation(), set_default_activation()

default_fiber_length

double OpenSim::Millard2012AccelerationMuscle::default_fiber_length

"assumed initial fiber length if none is assigned."

This property appears in XML files under the tag <default_fiber_length>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

See also

get_default_fiber_length(), upd_default_fiber_length(), set_default_fiber_length()

default_fiber_velocity

double OpenSim::Millard2012AccelerationMuscle::default_fiber_velocity

"assumed initial fiber velocity if none is assigned."

This property appears in XML files under the tag <default_fiber_velocity>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

See also

get_default_fiber_velocity(), upd_default_fiber_velocity(), set_default_fiber_velocity()

fiber_compressive_force_cos_pennation_damping

double OpenSim::Millard2012AccelerationMuscle::fiber_compressive_force_cos_pennation_damping

"fiber compressive force cos(pennationAngle) damping coefficient"

This property appears in XML files under the tag <fiber_compressive_force_cos_pennation_damping>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

See also

get_fiber_compressive_force_cos_pennation_damping(), upd_fiber_compressive_force_cos_pennation_damping(), set_fiber_compressive_force_cos_pennation_damping()

fiber_compressive_force_length_damping

double OpenSim::Millard2012AccelerationMuscle::fiber_compressive_force_length_damping

"fiber compressive force length damping coefficient"

This property appears in XML files under the tag <fiber_compressive_force_length_damping>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

See also

get_fiber_compressive_force_length_damping(), upd_fiber_compressive_force_length_damping(), set_fiber_compressive_force_length_damping()

fiber_damping

double OpenSim::Millard2012AccelerationMuscle::fiber_damping

"fiber damping coefficient"

This property appears in XML files under the tag <fiber_damping>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

See also

get_fiber_damping(), upd_fiber_damping(), set_fiber_damping()

fiber_force_length_damping

double OpenSim::Millard2012AccelerationMuscle::fiber_force_length_damping

"fiber force length damping coefficient"

This property appears in XML files under the tag <fiber_force_length_damping>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

See also

get_fiber_force_length_damping(), upd_fiber_force_length_damping(), set_fiber_force_length_damping()

FiberCompressiveForceCosPennationCurve

FiberCompressiveForceCosPennationCurve OpenSim::Millard2012AccelerationMuscle::FiberCompressiveForceCosPennationCurve

"fiber compressive force cos(pennationAngle) curve"

This property appears in XML files under the tag <FiberCompressiveForceCosPennationCurve>. This property was generated with the OpenSim_DECLARE_UNNAMED_PROPERTY macro; see Property to learn about the property system.

See also

get_FiberCompressiveForceCosPennationCurve(), upd_FiberCompressiveForceCosPennationCurve(), set_FiberCompressiveForceCosPennationCurve()

FiberCompressiveForceLengthCurve

FiberCompressiveForceLengthCurve OpenSim::Millard2012AccelerationMuscle::FiberCompressiveForceLengthCurve

"fiber compressive force length curve"

This property appears in XML files under the tag <FiberCompressiveForceLengthCurve>. This property was generated with the OpenSim_DECLARE_UNNAMED_PROPERTY macro; see Property to learn about the property system.

See also

get_FiberCompressiveForceLengthCurve(), upd_FiberCompressiveForceLengthCurve(), set_FiberCompressiveForceLengthCurve()

FiberForceLengthCurve

FiberForceLengthCurve OpenSim::Millard2012AccelerationMuscle::FiberForceLengthCurve

"fiber force length curve"

This property appears in XML files under the tag <FiberForceLengthCurve>. This property was generated with the OpenSim_DECLARE_UNNAMED_PROPERTY macro; see Property to learn about the property system.

See also

get_FiberForceLengthCurve(), upd_FiberForceLengthCurve(), set_FiberForceLengthCurve()

ForceVelocityCurve

ForceVelocityCurve OpenSim::Millard2012AccelerationMuscle::ForceVelocityCurve

"force velocity curve"

This property appears in XML files under the tag <ForceVelocityCurve>. This property was generated with the OpenSim_DECLARE_UNNAMED_PROPERTY macro; see Property to learn about the property system.

See also

get_ForceVelocityCurve(), upd_ForceVelocityCurve(), set_ForceVelocityCurve()

mass

double OpenSim::Millard2012AccelerationMuscle::mass

"lumped mass"

This property appears in XML files under the tag <mass>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

See also

get_mass(), upd_mass(), set_mass()

MuscleFirstOrderActivationDynamicModel

MuscleFirstOrderActivationDynamicModel OpenSim::Millard2012AccelerationMuscle::MuscleFirstOrderActivationDynamicModel

"activation dynamics model with a lower bound"

This property appears in XML files under the tag <MuscleFirstOrderActivationDynamicModel>. This property was generated with the OpenSim_DECLARE_UNNAMED_PROPERTY macro; see Property to learn about the property system.

See also

get_MuscleFirstOrderActivationDynamicModel(), upd_MuscleFirstOrderActivationDynamicModel(), set_MuscleFirstOrderActivationDynamicModel()

tendon_force_length_damping

double OpenSim::Millard2012AccelerationMuscle::tendon_force_length_damping

"tendon force length damping coefficient"

This property appears in XML files under the tag <tendon_force_length_damping>. This property was generated with the OpenSim_DECLARE_PROPERTY macro; see Property to learn about the property system.

See also

get_tendon_force_length_damping(), upd_tendon_force_length_damping(), set_tendon_force_length_damping()

TendonForceLengthCurve

TendonForceLengthCurve OpenSim::Millard2012AccelerationMuscle::TendonForceLengthCurve

"Tendon force length curve"

This property appears in XML files under the tag <TendonForceLengthCurve>. This property was generated with the OpenSim_DECLARE_UNNAMED_PROPERTY macro; see Property to learn about the property system.

See also

get_TendonForceLengthCurve(), upd_TendonForceLengthCurve(), set_TendonForceLengthCurve()

---

The documentation for this class was generated from the following file:

• OpenSim/Actuators/Millard2012AccelerationMuscle.h